Products - (2871966 Products)
Proto® 3/8" Drive Digital Torque and Angle Adapter 5-99.5 ft-lbs
Item #: KP4214990
Manufacturer: Proto
Mfg #: J6280TA100
Technical Specifications:
•Brand Name: Proto
•Length: 3-23/64
•Maximum Output: 1195
•Model Number: J6280TA100
Description:
•Torque and angle tightening with one tool: productivity improvement, digital display minimizes reading errors, and delivers high precision.
•+/-2° (rotating 90° at speed of 30° / sec) for angle accuracy.
•+/-3% clockwise or +/-4% counter clockwise for torque accuracy.
•LEDs for easy viewing of results and audible beep when desired level is reached.
•Buzzer and LED indicator for the 9 pre-settable target torques or angles.
•Five Units Selectable (N.m, ft-lb, in.lb, kg.cm, degree).
•50 data memory for recall and joint torque-angle auditing.
•Auto Sleep after about 2 minutes idle.
•Both AAA and rechargeable batteries are compatible.
Shipping Info:
•Actual Weight - 1.3300
•Dimensions - Height: 4.10 Length: 5.80 Width: 5.10
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Electronic Interchangeable Head Torque Wrench Assembly 10-100 ft-lbs - H5 Tang
Item #: KP4220140
Manufacturer: Proto
Mfg #: JH5-100F
Technical Specifications:
•Brand Name: Proto
•Head Height: 2
•Length: 17-1/4
•Model Number: JH5-100F
•Width: 1-3/4
Description:
•Full interface with Proto® Interchangeable Head Attachments.
•Accuracy of +/- 2% of indicated value in both clockwise and counter clockwise directions.
•Broad accuracy range extends from 10% to 100% of Full Scale to help reduce the number of torque wrenches required.
•Ninety-nine "on-board" memory storage locations help improve efficiency when taking multiple torque readings.
•Three units of measure are available (Ft-lb, In-lb, and Nm).
•Three operating modes: Track Mode, Peak Hold and Auto Clear.
•Fast sampling rate helps maintain high accuracy during torque applications.
•Torque wrench head rotates to allow for easy viewing of LCD display.
•Easy to read LCD Display with large digits.
•3-way Red/Green/Yellow lights.
•Yellow light appears at the low end of the zone.
•Green light appears and buzzer sounds when the target is reached.
•Red light appears with intermittent buzzer when it is over torqued.
•Audible buzzer helps identify when desired torque target zones are approaching and met.
•Target torque zone is adjustable from 1% to 10% of targeted torque value.
•Meets or exceeds ASME B107.28
Shipping Info:
•Actual Weight - 2.8300
•Dimensions - Height: 2.00 Length: 17.4 Width: 2.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Electronic Torque Tester 25-250 in-lbs
Item #: KP4220210
Manufacturer: Proto
Mfg #: J6472
Technical Specifications:
•Brand Name: Proto
•Head Height: 4-1/2
•Length: 6
•Maximum Output: 250
•Model Number: J6472
•Width: 6
Description:
•Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
•Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
•Broad accuracy range extends from 10% to 100% of full scale.
•Three units of measure are available ft-lb, in-lb, and Nm.
•Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
•Fast sampling rate helps maintain high accuracy during torque applications.
•Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter.
•Powered by a standard 9V battery, providing up to 50 hours run time.
•N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester.
•Optional all-steel stand (J6470S) provides a strong support with minimal footprint.
•Testers meet or exceed requirements set forth in ASME B107.29
Shipping Info:
•Actual Weight - 5.8800
•Dimensions - Height: 7.50 Length: 8.80 Width: 8.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Electronic Torque Tester 5-50 ft-lbs
Item #: KP4220195
Manufacturer: Proto
Mfg #: J6474
Technical Specifications:
•Brand Name: Proto
•Head Height: 4-1/2
•Length: 6
•Maximum Output: 600
•Model Number: J6474
•Width: 6
Description:
•Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
•Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
•Broad accuracy range extends from 10% to 100% of full scale.
•Three units of measure are available ft-lb, in-lb, and Nm.
•Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
•Fast sampling rate helps maintain high accuracy during torque applications.
•Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter.
•Powered by a standard 9V battery, providing up to 50 hours run time.
•N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester.
•Optional all-steel stand (J6470S) provides a strong support with minimal footprint.
•Testers meet or exceed requirements set forth in ASME B107.29
Shipping Info:
•Actual Weight - 5.9400
•Dimensions - Height: 7.50 Length: 8.80 Width: 8.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Electronic USB Torque Tester 5-50 ft-lbs
Item #: KP4220295
Manufacturer: Proto
Mfg #: J6474-C
Technical Specifications:
•Brand Name: Proto
•Head Height: 4-1/2
•Length: 6
•Maximum Output: 600
•Model Number: J6474-C
•Width: 6
Description:
•Powers the tester via USB cable.
•Recharges internal Nimh battery.
•Allows communication with computer for downloading torque readings via communication port on computer. Use with JH6000SW.
•An extensive two-way communication command set (ASCII text commands) that can control the tester remotely, from a computer, using any third party communication program (including Hyperterminal).
•Set target torque remotely.
•Set units remotely.
•Set target tolerance remotely.
•Set mode (track, peak, first peak) remotely.
•Query torque value remotely.
•Clear the display remotely.
•Get (call) torque value remotely by sending a carriage return to tester.
•100 torque reading memory (torque value saved to memory when save key is pressed on keypad).
Shipping Info:
•Actual Weight - 6.1400
•Dimensions - Height: 7.70 Length: 8.80 Width: 8.40
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Fixed Head Micrometer Torque Wrench 16-80 ft-lbs
Item #: KP4220735
Manufacturer: Proto
Mfg #: J6005C
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 14-23/32
•Model Number: J6005C
Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
•Calibration is accomplished by manual loading the torque wrenches.
•Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
Shipping Info:
•Actual Weight - 2.7900
•Dimensions - Height: 2.40 Length: 19.2 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Fixed Head Micrometer Torque Wrench 200-1000 in-lbs
Item #: KP4220760
Manufacturer: Proto
Mfg #: J6065C
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 14-41/64
•Maximum Output: 1000
•Model Number: J6065C
Description:
•Calibrated to +/- 4% clockwise direction and +/- 6% and counter clockwise direction at 20% to 100% of full scale.
•Calibration is accomplished by manual loading the torque wrenches.
•Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
Shipping Info:
•Actual Weight - 2.7500
•Dimensions - Height: 2.50 Length: 19.4 Width: 3.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Fixed Head Micrometer Torque Wrench 200-1000 in-lbs
Item #: KP4220715
Manufacturer: Proto
Mfg #: J6065CXCER
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 15-13/64
•Maximum Output: 1000
•Model Number: J6065CXCERT
Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction.
•Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
•Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.
•Manufactured to meet precision/highly accurate applications such as military and aerospace.
Shipping Info:
•Actual Weight - 2.9000
•Dimensions - Height: 2.50 Length: 19.4 Width: 3.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Fixed Head Micrometer Torque Wrench 40-200 in-lbs
Item #: KP4220710
Manufacturer: Proto
Mfg #: J6063CXCER
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 11-13/64
•Maximum Output: 200
•Model Number: J6063CXCERT
Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction.
•Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
•Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.
•Manufactured to meet precision/highly accurate applications such as military and aerospace.
Shipping Info:
•Actual Weight - 2.7700
•Dimensions - Height: 3.00 Length: 19.3 Width: 3.10
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Fixed Head Micrometer Torque Wrench 40-200 in-lbs
Item #: KP4220755
Manufacturer: Proto
Mfg #: J6063C
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 11-13/64
•Maximum Output: 200
•Model Number: J6063C
Description:
•Calibrated to +/- 4% clockwise direction and +/- 6% and counter clockwise direction at 20% to 100% of full scale.
•Calibration is accomplished by manual loading the torque wrenches.
•Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
Shipping Info:
•Actual Weight - 2.6500
•Dimensions - Height: 2.60 Length: 19.3 Width: 3.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Flex Head Micrometer Round Head Torque Wrench 10-100 Ft Lb
Item #: KP4220340
Manufacturer: Proto
Mfg #: J6012FC
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 16-45/64
•Model Number: J6012FC
Description:
•Flex head to 17+ degrees each direction.
•Certificate of calibration.
•Adjustable settings with both ft. lb. and N.m scales.
•Automated calibration with +-4% clockwise and +-6% counter clockwise accuracy.
•Reversible 72 teeth ratcheting mechanism.
•Sleek industrial design of both torque wrench and blow molded case.
Shipping Info:
•Actual Weight - 3.8900
•Dimensions - Height: 3.00 Length: 19.4 Width: 3.60
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Micrometer Interchangeable Head Torque Wrench Assembly 16-80 ft-lbs - H5 Tang
Item #: KP4220125
Manufacturer: Proto
Mfg #: JH5-6006C
Technical Specifications:
•Brand Name: Proto
•Head Height: 1-1/4
•Length: 15
•Model Number: JH5-6006C
•Width: 1-1/4
Description:
•Full interface with Proto® Interchangeable Head Attachments.
•Accuracy of +/-4% CW and +/-6% CCW.
•Two sizes available.
•Meets or exceeds ASME B107.14M specification.
Shipping Info:
•Actual Weight - 3.0600
•Dimensions - Height: 2.60 Length: 19.4 Width: 3.10
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Precision 90 Torque Wrench 40-200 in-lb
Item #: KP4220365
Manufacturer: Proto
Mfg #: J6064HTC
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 11-3/8
•Model Number: J6064HTC
Description:
•Calibrated to +/- 4% clockwise direction and +/- 6% and counter clockwise direction at 20% to 100% of full scale.
•Calibration is accomplished by mechanical loading the torque wrenches.
•Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
•90 tooth count head allows for 4 degree arc swing.
•Small, pear head design for access in tight, hard-to-reach work areas.
•Low profile reversing lever design for quick, one hand operation.
Shipping Info:
•Actual Weight - 2.6100
•Dimensions - Height: 2.60 Length: 19.4 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Ratchet Torque Wrench Head - H5 Tang
Item #: KP4219500
Manufacturer: Proto
Mfg #: JH5-38R
Technical Specifications:
•Brand Name: Proto
•Finish: Black Oxide
•For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS
•Head Height: 1
•Length: 4-3/32
•Maximum Output: 1200
•Model Number: JH5-38R
•Width: 1-7/16
Description:
•Fixed ratcheting head with a robust 24 tooth design with 15° arc swing.
•Alloy steel drive gear for strength and durability.
•Low profile for easy access.
•Reversing lever design for quick, one handed operation.
Shipping Info:
•Actual Weight - .4800
•Dimensions - Height: 1.00 Length: 4.10 Width: 1.50
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Ratcheting Head Micrometer Torque Wrench 16-80 ft-lbs
Item #: KP4220785
Manufacturer: Proto
Mfg #: J6006CXCER
Technical Specifications:
•Brand Name: Proto
•Description: Yes
•Finish: Full Polish
•Length: 15-1/32
•Model Number: J6006CXCERT
Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction.
•Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
•Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.
•Manufactured to meet precision/highly accurate applications such as military and aerospace.
Shipping Info:
•Actual Weight - 3.0600
•Dimensions - Height: 2.40 Length: 19.2 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Ratcheting Head Micrometer Torque Wrench 16-80 Nm
Item #: KP4220850
Manufacturer: Proto
Mfg #: J6006MC
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 15-1/32
•Model Number: J6006MC
Description:
•Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
•Calibration is accomplished by manual loading the torque wrenches.
•Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
Shipping Info:
•Actual Weight - 3.1100
•Dimensions - Height: 2.60 Length: 19.3 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Ratcheting Head Micrometer Torque Wrench 16-80 Nm
Item #: KP4220855
Manufacturer: Proto
Mfg #: J6006NMC
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 15-1/32
•Model Number: J6006NMC
Description:
•Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
•Calibration is accomplished by manual loading the torque wrenches.
•Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
Shipping Info:
•Actual Weight - 2.9800
•Dimensions - Height: 2.50 Length: 19.3 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Ratcheting Head Micrometer Torque Wrench 200-1000 in-lbs
Item #: KP4220900
Manufacturer: Proto
Mfg #: J6066C
Technical Specifications:
•Brand Name: Proto
•Description: No
•Finish: Full Polish
•Length: 15-1/2
•Maximum Output: 1000
•Model Number: J6066C
Description:
•Calibrated to +/- 4% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale.
•Calibration is accomplished by manually loading the torque wrench.
•Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance.
Shipping Info:
•Actual Weight - 3.1100
•Dimensions - Height: 2.50 Length: 19.3 Width: 3.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Ratcheting Head Micrometer Torque Wrench 200-1000 in-lbs
Item #: KP4220775
Manufacturer: Proto
Mfg #: J6066CXCER
Technical Specifications:
•Brand Name: Proto
•Description: Yes
•Finish: Full Polish
•Length: 15-1/2
•Maximum Output: 1000
•Model Number: J6066CXCERT
Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction.
•Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
•Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.
•Manufactured to meet precision/highly accurate applications such as military and aerospace.
Shipping Info:
•Actual Weight - 3.1800
•Dimensions - Height: 2.50 Length: 19.3 Width: 3.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs
Item #: KP4220770
Manufacturer: Proto
Mfg #: J6064CXCER
Technical Specifications:
•Brand Name: Proto
•Description: Yes
•Finish: Full Polish
•Length: 11-7/8
•Maximum Output: 200
•Model Number: J6064CXCERT
Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction.
•Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
•Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.
•Manufactured to meet precision/highly accurate applications such as military and aerospace.
Shipping Info:
•Actual Weight - 2.5700
•Dimensions - Height: 2.60 Length: 19.5 Width: 3.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It