Proto® 3/4" Drive Dial Torque Wrench 70-350 ft-lbs

Item #: KP4220975
Manufacturer: Proto
Mfg #: J6134F

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 27-7/8 •Model Number: J6134F

Description:
•Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (English/Metric) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench. •J6133F and J6141F include 1 removable extension handle for easy force application.

Shipping Info:
•Actual Weight - 9.8700 •Dimensions - Height: 4.00 Length: 28.0 Width: 6.00

$728.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Drive Electronic Torque Tester 60-600 ft-lbs

Item #: KP4220220
Manufacturer: Proto
Mfg #: J6478

Technical Specifications:
•Brand Name: Proto •Head Height: 4-1/2 •Length: 6 •Maximum Output: 7200 •Model Number: J6478 •Width: 6

Description:
•Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required. •Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions. •Broad accuracy range extends from 10% to 100% of full scale. •Three units of measure are available ft-lb, in-lb, and Nm. •Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches). •Fast sampling rate helps maintain high accuracy during torque applications. •Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter. •Powered by a standard 9V battery, providing up to 50 hours run time. •N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester. •Optional all-steel stand (J6470S) provides a strong support with minimal footprint. •Testers meet or exceed requirements set forth in ASME B107.29

Shipping Info:
•Actual Weight - 7.8900 •Dimensions - Height: 7.50 Length: 8.80 Width: 8.30

$2,304.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Drive Electronic USB Torque Tester 60-600 ft-lbs

Item #: KP4220305
Manufacturer: Proto
Mfg #: J6478-C

Technical Specifications:
•Brand Name: Proto •Head Height: 4-1/2 •Length: 6 •Maximum Output: 7200 •Model Number: J6478-C •Width: 6

Description:
•Powers the tester via USB cable. •Recharges internal Nimh battery. •Allows communication with computer for downloading torque readings via communication port on computer. Use with JH6000SW. •An extensive two-way communication command set (ASCII text commands) that can control the tester remotely, from a computer, using any third party communication program (including Hyperterminal). •Set target torque remotely. •Set units remotely. •Set target tolerance remotely. •Set mode (track, peak, first peak) remotely. •Query torque value remotely. •Clear the display remotely. •Get (call) torque value remotely by sending a carriage return to tester. •100 torque reading memory (torque value saved to memory when save key is pressed on keypad).

Shipping Info:
•Actual Weight - 8.0800 •Dimensions - Height: 7.70 Length: 8.80 Width: 8.20

$4,186.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Drive Fixed Head Micrometer Torque Wrench 120-600 ft-lbs

Item #: KP4220730
Manufacturer: Proto
Mfg #: J6017B

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 41-5/32 •Model Number: J6017B

Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale. •Calibration is accomplished by manual loading the torque wrenches. •Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.

Shipping Info:
•Actual Weight - 15.4000 •Dimensions - Height: 4.60 Length: 49.0 Width: 4.60

$1,272.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Drive Ratchet Head Repair Kit - Torque Wrench

Item #: KP4220950
Manufacturer: Proto
Mfg #: J6018RK

Technical Specifications:
•Brand Name: Proto •For Use With: J6018AB, J6018CX, J6018CXCERT, J6020AB, J6020CX, J6020CXCERT, J6020NM •Model Number: J6018RK

Description:
•1/4" to 1" ratchet wheels made from alloy steel for uncompromising strength and durability. •Field repair your torque wrench ratchet head easily with the corresponding repair kit.

Shipping Info:
•Actual Weight - 1.3550 •Dimensions - Height: 2.10 Length: 5.25 Width: 2.85

$43.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Drive Ratcheting Head Micrometer Torque Wrench 120-600 ft-lbs

Item #: KP4220810
Manufacturer: Proto
Mfg #: J6020CXCER

Technical Specifications:
•Brand Name: Proto •Description: Yes •Finish: Full Polish •Length: 41-17/32 •Model Number: J6020CXCERT

Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction. •Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. •Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only. •Manufactured to meet precision/highly accurate applications such as military and aerospace.

Shipping Info:
•Actual Weight - 16.2400 •Dimensions - Height: 4.50 Length: 49.3 Width: 4.80

$1,621.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Drive Ratcheting Head Micrometer Torque Wrench 160-800 Nm

Item #: KP4220815
Manufacturer: Proto
Mfg #: J6020NM

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 41-17/32 •Model Number: J6020NM

Description:
•Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale. •Calibration is accomplished by manual loading the torque wrenches. •Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.

Shipping Info:
•Actual Weight - 16.2400 •Dimensions - Height: 4.80 Length: 49.3 Width: 4.50

$1,184.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Drive Ratcheting Head Micrometer Torque Wrench 60-300 ft-lbs

Item #: KP4220805
Manufacturer: Proto
Mfg #: J6018CXCER

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 32-3/4 •Model Number: J6018CXCERT

Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction. •Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. •Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only. •Manufactured to meet precision/highly accurate applications such as military and aerospace.

Shipping Info:
•Actual Weight - 14.6300 •Dimensions - Height: 4.50 Length: 48.5 Width: 4.90

$1,130.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Drive Torque Multiplier Square Drive Replacement Kit

Item #: KP4221045
Manufacturer: Proto
Mfg #: J6212RD

Technical Specifications:
•Brand Name: Proto •For Use With: J6212, J6212CERT •Model Number: J6212RD

Description:
•Proto® Torque Multipliers provide overload protection with replaceable output square drives that are designed to twist off at 3%-10% over maximum output capacity.

Shipping Info:
•Actual Weight - .2000 •Dimensions - Height: .700 Length: 1.50 Width: .700

$73.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Open End Torque Wrench Head - H5 Tang

Item #: KP4219730
Manufacturer: Proto
Mfg #: JH5-24

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-15/16 •Maximum Output: 1500 •Model Number: JH5-24 •Size: 3/4 •Width: 1-19/32

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .2600 •Dimensions - Height: .600 Length: 4.00 Width: 1.60

$67.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Open End Torque Wrench Head - H7 Tang

Item #: KP4219985
Manufacturer: Proto
Mfg #: JH7-24

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH7-250F, JH7-6014C •Head Height: 13/16 •Length: 5-1/2 •Maximum Output: 1500 •Model Number: JH7-24 •Size: 3/4 •Width: 1-19/32

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .4200 •Dimensions - Height: .800 Length: 5.50 Width: 1.60

$80.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Box End Torque Wrench Head - H4 Tang

Item #: KP4219510
Manufacturer: Proto
Mfg #: JH4-12B

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH4-250, JH4-150PS, JH4-50FPS •Head Height: 7/16 •Length: 3-1/32 •Maximum Output: 490 •Model Number: JH4-12B •Size: 3/8 •Width: 19/32

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .0800 •Dimensions - Height: .500 Length: 3.00 Width: .600

$80.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Electronic Torque Wrench 25-250 in-lbs

Item #: KP4221030
Manufacturer: Proto
Mfg #: J6345

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Head Height: 2-1/2 •Length: 11 •Maximum Output: 250 •Model Number: J6345 •Width: 3

Description:
•Extended operation range in ft-lb, in-lb and Nm units. •Precision Accuracy: + / - 1% in BOTH directions. •Accuracy valid from 10% to 100% of full scale. •Large easy to read digits. •Patented rotary bezel. LCD and key pad rotate both ways, up to 359 degrees for easy viewing. •Torque target zone adjustable 1% to 10% indicates when the desired torque limit is approaching.– Yellow light indicates the low end of the zone– Green light and buzzer sounds when the target is reached– Red Light with intermittent buzzer indicates over-torqued •One button target torque setting. •Ergonomically designed for user comfort. •Operates on standard 9 volt battery. •Torsion drive strain gauge technology improves accuracy.– Users can pull on the handle anywhere and still maintain accuracy. •Built on durable chrome body (not painted) with nylon-6 rotary bezel. •Rotary dial is shrouded with metal walls to protect display. •Peak, hold and track modes standard. •Fast sampling rate helps maintain high accuracy during torque applications. •Easy to use by production line or quality control inspector. •Meets or exceeds ASME B107.28

Shipping Info:
•Actual Weight - 1.7700 •Dimensions - Height: 2.90 Length: 11.6 Width: 3.90

$911.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Electronic Torque Wrench 5-50 ft-lbs

Item #: KP4220175
Manufacturer: Proto
Mfg #: J6345A

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Head Height: 2-1/2 •Length: 11 •Maximum Output: 600 •Model Number: J6345A •Width: 3

Description:
•Extended operation range in ft-lb, in-lb and Nm units. •Precision Accuracy: + / - 1% in BOTH directions. •Accuracy valid from 10% to 100% of full scale. •Large easy to read digits. •Patented rotary bezel. LCD and key pad rotate both ways, up to 359 degrees for easy viewing. •Torque target zone adjustable 1% to 10% indicates when the desired torque limit is approaching.– Yellow light indicates the low end of the zone– Green light and buzzer sounds when the target is reached– Red Light with intermittent buzzer indicates over-torqued •One button target torque setting. •Ergonomically designed for user comfort. •Operates on standard 9 volt battery. •Torsion drive strain gauge technology improves accuracy.– Users can pull on the handle anywhere and still maintain accuracy. •Built on durable chrome body (not painted) with nylon-6 rotary bezel. •Rotary dial is shrouded with metal walls to protect display. •Peak, hold and track modes standard. •Fast sampling rate helps maintain high accuracy during torque applications. •Easy to use by production line or quality control inspector. •Meets or exceeds ASME B107.28

Shipping Info:
•Actual Weight - 2.1400 •Dimensions - Height: 3.20 Length: 11.1 Width: 5.30

$946.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Torque Wrench

Item #: KP4220310
Manufacturer: Proto
Mfg #: J6177NMFCE

Technical Specifications:
•Brand Name: Proto •Length: 10 •Model Number: J6177NMFCERT

Description:
•2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs •Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (Metric/English) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certi cation supplied with each wrench.

Shipping Info:
•Actual Weight - 1.8500 •Dimensions - Height: 3.20 Length: 11.0 Width: 5.20

$398.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Torque Wrench 10-50 ft-lbs, 1.4-7 mkg

Item #: KP4220955
Manufacturer: Proto
Mfg #: J6113F

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 10-1/4 •Model Number: J6113F

Description:
•Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (English/Metric) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench.

Shipping Info:
•Actual Weight - 2.0400 •Dimensions - Height: 3.20 Length: 11.1 Width: 5.40

$295.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Torque Wrench 120-600 in-lbs, 140-700 cm kg

Item #: KP4221005
Manufacturer: Proto
Mfg #: J6181F

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 10 •Maximum Output: 600 •Model Number: J6181F

Description:
•6-30 in-lbs thru 120-600 in-lbs / 7-35 cm kg thru 140-700 cm kg. •Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (English/Metric) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench.

Shipping Info:
•Actual Weight - 1.9700 •Dimensions - Height: 3.20 Length: 11.1 Width: 5.50

$307.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Torque Wrench 14-70 Nm, 10-50 ft-lbs

Item #: KP4221010
Manufacturer: Proto
Mfg #: J6113NMF

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 14-7/8 •Model Number: J6113NMF

Description:
•2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs •Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (Metric/English) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench.

Shipping Info:
•Actual Weight - 1.9100 •Dimensions - Height: 3.30 Length: 11.1 Width: 5.50

$304.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Torque Wrench 50-250 in-lbs, 56-280 cm kg

Item #: KP4221000
Manufacturer: Proto
Mfg #: J6177F

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 10 •Maximum Output: 250 •Model Number: J6177F

Description:
•6-30 in-lbs thru 120-600 in-lbs / 7-35 cm kg thru 140-700 cm kg. •Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (English/Metric) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench.

Shipping Info:
•Actual Weight - 1.9600 •Dimensions - Height: 3.20 Length: 11.1 Width: 5.50

$297.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Torque Wrench 6-30 Nm, 50-250 in-lbs

Item #: KP4221025
Manufacturer: Proto
Mfg #: J6177NMF

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 10 •Maximum Output: 250 •Model Number: J6177NMF

Description:
•2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs •Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (Metric/English) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench.

Shipping Info:
•Actual Weight - 1.9500 •Dimensions - Height: 3.20 Length: 11.0 Width: 5.40

$302.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It