#15158 - 1 lb Cake - Fixturing Alloy

Item #: GG4515158
Manufacturer: Flexbar
Mfg #: 15158

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Cake •Size: 1 lb •Type: Fixturing Alloy

Description:
•Reusable low-temperature melting Alloy (158°F) for supporting thin-walled sections which require machining •Does not shrink upon solidification •After machining you simply melt it out in hot water. Melts at 54° F below boiling point of water •Simply put it in a cast iron, stainless steel or porcelain lined pot and into hot water bath to melt it •Reusable many times •No drosses created owing to low heat required prior to pouring it •Uses of No. 15158 CHUCKS, JIGS AND FIXTURES: 1. Spinning Metal into re-entrant or bottle neck shapes. 2. Holding irregular shaped workpieces during machining. 3. Bushings anchored in drill jigs. 4. Cast ref. surfaces in assembly, checking, die spotting, drilling, inspection fixtures. 5. Transfer templates in contour jigs •MODELS AND PATTERNS: 1. Duplicate Patterns for Foundry Match Plates, Ceramics, Plastics and Pottery 2. Patterns Compensated for Shrinkages

Shipping Info:
•Actual Weight - 1.0500 •Dimensions - Height: .350 Length: 7.50 Width: 5.00

#16116 - Thin Pour Trial Kit

Item #: GG4516116
Manufacturer: Flexbar
Mfg #: 16116

Technical Specifications:
•Brand Name: Flexbar

Description:


Shipping Info:
•Actual Weight - .5000

#16117 - 1 lb Cake - Fine Proofing Alloy

Item #: GG4516117
Manufacturer: Flexbar
Mfg #: 16117

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Cake •Size: 1 lb •Type: Fine Proofing Alloy

Description:
•Uses of NO. 16117 PROOFING VIA REPLICATION OF: dies moulding internal and external thread forms texture check groove slots O-ring grooves gear teeth splines surface finish replication extra-fine fixturing checking undercuts •OTHER USES: 1. Precision holding of irregular work pieces during machining. 2. Dental-type model making. 3. Drill bushings for drill jigs. 4. Checks for lens buffing-gem cutting. 5. Transfer templates in contour jigs. 6. Cores for electroforming. 7. Compound wax patterns-lost wax patterns. 8. Duplicating plastic •Facsimile or plaster patterns •Flexbar No. 16117 fine proofing alloy can be used in conjunction with our facsimile measure-image replicating material •Accordingly-you can clone or reproduce original parts for prototypes, small production runs, etc.

Shipping Info:
•Actual Weight - 1.0000 •Dimensions - Height: .380 Length: 7.00 Width: 5.00

#16129 - Quick Setting Putty

Item #: GG4516129
Manufacturer: Flexbar
Mfg #: 16129

Technical Specifications:
•Brand Name: Flexbar

Description:


Shipping Info:
•Actual Weight - .8000 •Dimensions - Height: 3.80 Length: 2.60 Width: 5.00

1 lb - Facsimile Quick-Setting Compound Kit

Item #: GG4516000
Manufacturer: Flexbar
Mfg #: 16000

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Complete Kit •Hazard Code: HAZ03 •Size: 1 lb •Type: Facsimile Quick-Setting Compound Kit

Description:
•"Facsimile" is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. •Test surface geometry, flatness, microfinish, etc. •Make custom holding and nesting fixtures •Mask, fill in and seal •Fretting depth of blade dovetails in jet engines •Makes potting, bonding and repairing easy •Will not affect the surface of ferrous or non-ferrous materials to which it is applied •Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 1 -120cc FACSIMILE liquid / 1 - 60cc Flexbar Release Agent / 1 - powder scoop / 1 - molding clay/ 10 - disposable cups (graduated)/ 10 - wooden spatulas/ 1 - 1 oz. polypropylene measuring cup

Shipping Info:
•HAZ 03 •UPS Ground - No Additional Shipping Charges •UPS Air - Not Available •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 2.2280

HAZARDOUS MATERIAL. NON REFUNDABLE / NON RETURNABLE ITEM

1 lb Facsimile Powder - Refill for Facsimile Kit

Item #: GG4516202
Manufacturer: Flexbar
Mfg #: 16202

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Facsimile Powder •Hazard Code: HAZ57 •Size: 1 lb Jar Facsimile Powder¢ •Type: Refill for Facsimile Kit

Description:
•"Facsimile" is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. •Test surface geometry, flatness, microfinish, etc. •Make custom holding and nesting fixtures •Mask, fill in and seal •Fretting depth of blade dovetails in jet engines •Makes potting, bonding and repairing easy •Will not affect the surface of ferrous or non-ferrous materials to which it is applied •Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 1 -120cc FACSIMILE liquid / 1 - 60cc Flexbar Release Agent / 1 - powder scoop / 1 - molding clay/ 10 - disposable cups (graduated)/ 10 - wooden spatulas/ 1 - 1 oz. polypropylene measuring cup

Shipping Info:
•HAZ 57 •UPS Ground - No Additional Shipping Charges •UPS Air-No Additional Shipping Charges •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 1.0000

1 Oz 100-Pk Plastic Cups Grad - Refill for Facsimile Kit

Item #: GG4516210
Manufacturer: Flexbar
Mfg #: 16210

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: 100-Pack Plastic Cups Graduated •Hazard Code: HAZ04 •Size: 100 ea. 1 oz. Plastic Cups Graduated •Type: Refill for Facsimile Kit

Description:
•"Facsimile" is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. •Test surface geometry, flatness, microfinish, etc. •Make custom holding and nesting fixtures •Mask, fill in and seal •Fretting depth of blade dovetails in jet engines •Makes potting, bonding and repairing easy •Will not affect the surface of ferrous or non-ferrous materials to which it is applied •Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 1 -120cc FACSIMILE liquid / 1 - 60cc Flexbar Release Agent / 1 - powder scoop / 1 - molding clay/ 10 - disposable cups (graduated)/ 10 - wooden spatulas/ 1 - 1 oz. polypropylene measuring cup

Shipping Info:
•Actual Weight - 1.0000

1-1/2" Dia 12" Long Cylinder - Machinable Wax

Item #: GG4515170
Manufacturer: Flexbar
Mfg #: 15170

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Cylinder •Size: 1.5 Dia x 12 •Type: Machinable Wax

Description:
•You can easily machine Flexbar Machinable Wax without the need for costly and messy coolants or lubricants, because MACHINABLE WAX is "self-lubricating", "non-abrasive" and it will not fuse when machined at high-end spindle rpm s and feed rates •Unlike wood or plastic, MACHINABLE WAX will not "gum up" on tool bits •As illustrated by the machined and assembled prototype on the front of this bulletin, sharp edges can be maintained, accurate threads can be cut and thin wall sections maintained with the quality of surface finish capable of being produced by your cutting tools and machine •MACHINABLE WAX is not cellular, grainy, or abrasive so "voids" in machined surfaces (common with plastics and wood) and "tool wear" are negligible •Flexbar Machinable Wax will also machine "within designated tolerances" to provide you with a dimensionally accurate prototype that can be assembled for checking.

Shipping Info:
•Actual Weight - .7800

120cc Facsimile Liquid - Refill for Facsimile Kit

Item #: GG4516205
Manufacturer: Flexbar
Mfg #: 16205

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Facsimile Liquid •Hazard Code: HAZ03 •Size: 120cc Bottle Facsimile Liquid •Type: Refill for Facsimile Kit

Description:
•"Facsimile" is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. •Test surface geometry, flatness, microfinish, etc. •Make custom holding and nesting fixtures •Mask, fill in and seal •Fretting depth of blade dovetails in jet engines •Makes potting, bonding and repairing easy •Will not affect the surface of ferrous or non-ferrous materials to which it is applied •Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 1 -120cc FACSIMILE liquid / 1 - 60cc Flexbar Release Agent / 1 - powder scoop / 1 - molding clay/ 10 - disposable cups (graduated)/ 10 - wooden spatulas/ 1 - 1 oz. polypropylene measuring cup

Shipping Info:
•HAZ 03 •UPS Ground - No Additional Shipping Charges •UPS Air - Additional Charge of $98.00 per Box •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - .5000

2" Dia 12" Long Cylinder - Machinable Wax

Item #: GG4515165
Manufacturer: Flexbar
Mfg #: 15165

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Cylinder •Size: 2 Dia x 12 •Type: Machinable Wax

Description:
•You can easily machine Flexbar Machinable Wax without the need for costly and messy coolants or lubricants, because MACHINABLE WAX is "self-lubricating", "non-abrasive" and it will not fuse when machined at high-end spindle rpm s and feed rates •Unlike wood or plastic, MACHINABLE WAX will not "gum up" on tool bits •As illustrated by the machined and assembled prototype on the front of this bulletin, sharp edges can be maintained, accurate threads can be cut and thin wall sections maintained with the quality of surface finish capable of being produced by your cutting tools and machine •MACHINABLE WAX is not cellular, grainy, or abrasive so "voids" in machined surfaces (common with plastics and wood) and "tool wear" are negligible •Flexbar Machinable Wax will also machine "within designated tolerances" to provide you with a dimensionally accurate prototype that can be assembled for checking.

Shipping Info:
•Actual Weight - 1.2620 •Dimensions - Height: 2.00 Length: 12.0 Width: 2.00

20 Oz Epoxy Parfilm - Release Agent for Facsimile

Item #: GG4516136
Manufacturer: Flexbar
Mfg #: 16136

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Epoxy Parfilm •Hazard Code: HAZ03 •Size: Epoxy Parfilm (20oz. Spray Can) •Type: Special Release Agent

Description:
•Special Release Agent Refill for Facsimile Kit

Shipping Info:
•HAZ 03 •UPS Ground - No Additional Shipping Charges •UPS Air - Additional Charge of $98.00 per Box •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 1.5240 •Dimensions - Height: 3.00 Length: 8.00 Width: 3.00

24 x 24 x 2" Rectangular Block - Machinable Wax

Item #: GG4515164
Manufacturer: Flexbar
Mfg #: 15164

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Rectangular Block •Size: 24 x 24 x 2 •Type: Machinable Wax

Description:
•You can easily machine Flexbar Machinable Wax without the need for costly and messy coolants or lubricants, because MACHINABLE WAX is "self-lubricating", "non-abrasive" and it will not fuse when machined at high-end spindle rpm s and feed rates •Unlike wood or plastic, MACHINABLE WAX will not "gum up" on tool bits •As illustrated by the machined and assembled prototype on the front of this bulletin, sharp edges can be maintained, accurate threads can be cut and thin wall sections maintained with the quality of surface finish capable of being produced by your cutting tools and machine •MACHINABLE WAX is not cellular, grainy, or abrasive so "voids" in machined surfaces (common with plastics and wood) and "tool wear" are negligible •Flexbar Machinable Wax will also machine "within designated tolerances" to provide you with a dimensionally accurate prototype that can be assembled for checking.

Shipping Info:
•Actual Weight - 44.0000

25 lb - Facsimile Quick-Setting Compound Kit

Item #: GG4516025
Manufacturer: Flexbar
Mfg #: 16025

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Complete Kit •Hazard Code: HAZ04 •Size: 25 lb •Type: Facsimile Quick-Setting Compound Kit

Description:
•"Facsimile" is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. •Test surface geometry, flatness, microfinish, etc. •Make custom holding and nesting fixtures •Mask, fill in and seal •Fretting depth of blade dovetails in jet engines •Makes potting, bonding and repairing easy •Will not affect the surface of ferrous or non-ferrous materials to which it is applied •Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 1 -120cc FACSIMILE liquid / 1 - 60cc Flexbar Release Agent / 1 - powder scoop / 1 - molding clay/ 10 - disposable cups (graduated)/ 10 - wooden spatulas/ 1 - 1 oz. polypropylene measuring cup

Shipping Info:
•HAZ 04 •UPS Ground - Additional Charge of $35.00 per Box •UPS Air - Additional Charge of $98.00 per Box •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 30.0000

25 lb Drum Facsimile Powder - Refill for Facsimile Kit

Item #: GG4516204
Manufacturer: Flexbar
Mfg #: 16204

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Drum Facsimile Powder •Hazard Code: HAZ57 •Size: 25 lb Drum Facsimile Powder¢ •Type: Refill for Facsimile Kit

Description:
•"Facsimile" is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. •Test surface geometry, flatness, microfinish, etc. •Make custom holding and nesting fixtures •Mask, fill in and seal •Fretting depth of blade dovetails in jet engines •Makes potting, bonding and repairing easy •Will not affect the surface of ferrous or non-ferrous materials to which it is applied •Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 1 -120cc FACSIMILE liquid / 1 - 60cc Flexbar Release Agent / 1 - powder scoop / 1 - molding clay/ 10 - disposable cups (graduated)/ 10 - wooden spatulas/ 1 - 1 oz. polypropylene measuring cup

Shipping Info:
•HAZ 57 •UPS Ground - No Additional Shipping Charges •UPS Air-No Additional Shipping Charges •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 25.0000

3 lb - Facsimile Quick-Setting Compound Kit

Item #: GG4516003
Manufacturer: Flexbar
Mfg #: 16003

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Complete Kit •Hazard Code: HAZ03 •Size: 3 lb •Type: Facsimile Quick-Setting Compound Kit

Description:
•"Facsimile" is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. •Test surface geometry, flatness, microfinish, etc. •Make custom holding and nesting fixtures •Mask, fill in and seal •Fretting depth of blade dovetails in jet engines •Makes potting, bonding and repairing easy •Will not affect the surface of ferrous or non-ferrous materials to which it is applied •Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 1 -120cc FACSIMILE liquid / 1 - 60cc Flexbar Release Agent / 1 - powder scoop / 1 - molding clay/ 10 - disposable cups (graduated)/ 10 - wooden spatulas/ 1 - 1 oz. polypropylene measuring cup

Shipping Info:
•HAZ 03 •UPS Ground - No Additional Shipping Charges •UPS Air - Additional Charge of $98.00 per Box •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 4.1680

3 lb Facsimile Powder - Refill for Facsimile Kit

Item #: GG4516203
Manufacturer: Flexbar
Mfg #: 16203

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Facsimile Powder •Hazard Code: HAZ57 •Size: 3 lb Jar Facsimile Powder¢ •Type: Refill for Facsimile Kit

Description:
•"Facsimile" is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. •Test surface geometry, flatness, microfinish, etc. •Make custom holding and nesting fixtures •Mask, fill in and seal •Fretting depth of blade dovetails in jet engines •Makes potting, bonding and repairing easy •Will not affect the surface of ferrous or non-ferrous materials to which it is applied •Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 1 -120cc FACSIMILE liquid / 1 - 60cc Flexbar Release Agent / 1 - powder scoop / 1 - molding clay/ 10 - disposable cups (graduated)/ 10 - wooden spatulas/ 1 - 1 oz. polypropylene measuring cup

Shipping Info:
•HAZ 58 •UPS Ground - No Additional Shipping Charges •UPS Air-No Additional Shipping Charges •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 2.5000

3 x 7 x 1.5" Rectangular Block - Machinable Wax

Item #: GG4515160
Manufacturer: Flexbar
Mfg #: 15160

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Rectangular Block •Size: 3 x 7 x 1.5 •Type: Machinable Wax

Description:
•You can easily machine Flexbar Machinable Wax without the need for costly and messy coolants or lubricants, because MACHINABLE WAX is "self-lubricating", "non-abrasive" and it will not fuse when machined at high-end spindle rpm s and feed rates •Unlike wood or plastic, MACHINABLE WAX will not "gum up" on tool bits •As illustrated by the machined and assembled prototype on the front of this bulletin, sharp edges can be maintained, accurate threads can be cut and thin wall sections maintained with the quality of surface finish capable of being produced by your cutting tools and machine •MACHINABLE WAX is not cellular, grainy, or abrasive so "voids" in machined surfaces (common with plastics and wood) and "tool wear" are negligible •Flexbar Machinable Wax will also machine "within designated tolerances" to provide you with a dimensionally accurate prototype that can be assembled for checking.

Shipping Info:
•Actual Weight - 1.0400 •Dimensions - Height: 1.50 Length: 7.00 Width: 3.00

3 x 7 x 3" Rectangular Block - Machinable Wax

Item #: GG4515161
Manufacturer: Flexbar
Mfg #: 15161

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Rectangular Block •Size: 3 x 7 x 3 •Type: Machinable Wax

Description:
•You can easily machine Flexbar Machinable Wax without the need for costly and messy coolants or lubricants, because MACHINABLE WAX is "self-lubricating", "non-abrasive" and it will not fuse when machined at high-end spindle rpm s and feed rates •Unlike wood or plastic, MACHINABLE WAX will not "gum up" on tool bits •As illustrated by the machined and assembled prototype on the front of this bulletin, sharp edges can be maintained, accurate threads can be cut and thin wall sections maintained with the quality of surface finish capable of being produced by your cutting tools and machine •MACHINABLE WAX is not cellular, grainy, or abrasive so "voids" in machined surfaces (common with plastics and wood) and "tool wear" are negligible •Flexbar Machinable Wax will also machine "within designated tolerances" to provide you with a dimensionally accurate prototype that can be assembled for checking.

Shipping Info:
•Actual Weight - 2.0320 •Dimensions - Height: 3.00 Length: 7.00 Width: 3.00

3" Dia 12" Long Cylinder - Machinable Wax

Item #: GG4515166
Manufacturer: Flexbar
Mfg #: 15166

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Cylinder •Size: 3" Dia x 12 •Type: Machinable Wax

Description:
•You can easily machine Flexbar Machinable Wax without the need for costly and messy coolants or lubricants, because MACHINABLE WAX is "self-lubricating", "non-abrasive" and it will not fuse when machined at high-end spindle rpm s and feed rates •Unlike wood or plastic, MACHINABLE WAX will not "gum up" on tool bits •As illustrated by the machined and assembled prototype on the front of this bulletin, sharp edges can be maintained, accurate threads can be cut and thin wall sections maintained with the quality of surface finish capable of being produced by your cutting tools and machine •MACHINABLE WAX is not cellular, grainy, or abrasive so "voids" in machined surfaces (common with plastics and wood) and "tool wear" are negligible •Flexbar Machinable Wax will also machine "within designated tolerances" to provide you with a dimensionally accurate prototype that can be assembled for checking.

Shipping Info:
•Actual Weight - 3.3780

4" Dia 14" Long Cylinder - Machinable Wax

Item #: GG4515167
Manufacturer: Flexbar
Mfg #: 15167

Technical Specifications:
•Brand Name: Flexbar •Class: Machinist Set-Up Tools •Description: Cylinder •Size: 4" Dia x 14 •Type: Machinable Wax

Description:
•You can easily machine Flexbar Machinable Wax without the need for costly and messy coolants or lubricants, because MACHINABLE WAX is "self-lubricating", "non-abrasive" and it will not fuse when machined at high-end spindle rpm s and feed rates •Unlike wood or plastic, MACHINABLE WAX will not "gum up" on tool bits •As illustrated by the machined and assembled prototype on the front of this bulletin, sharp edges can be maintained, accurate threads can be cut and thin wall sections maintained with the quality of surface finish capable of being produced by your cutting tools and machine •MACHINABLE WAX is not cellular, grainy, or abrasive so "voids" in machined surfaces (common with plastics and wood) and "tool wear" are negligible •Flexbar Machinable Wax will also machine "within designated tolerances" to provide you with a dimensionally accurate prototype that can be assembled for checking.

Shipping Info:
•Actual Weight - 6.5000