Products

• Replaceable Drill Tip: SMF235 AH9130, 140 &deg N/A Seat Size 23, TiAlN Finish, No
• Die Drill Bit: 135 °, Solid Carbide Bright/Polished Finish, Series CoroDrill 400
• On The Job Safety Begins Here This Plant Has Worked ____ Days Without An OSHA Recordable Injury The Best Previous Record Was ____ Days - Rectangle, 3.75″ Thick, Indoor or Outdoor, For Inspection, Testing and Accident Data
• Replaceable Drill Tip: SMF220 AH9130, 140 &deg N/A Seat Size 22, TiAlN Finish, No
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Weldon Flat Shank Uses 2 SDES Inserts, 0.088″ Max Depth, 5″ OAL, Through Coolant
• Indexable Square-Shoulder End Mill: EPAV06M010C08.0R02L, 8.0000'' Shank Dia, Straight Shank Uses 2, Normal Pressure, 100.00 mm OAL
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.3500 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.1180 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1006; Maximum Ramping Angle: 1.2 ™; Series: DP6P; Cutt
• Replaceable Drill Tip: SMF225 AH9130, 140 &deg N/A Seat Size 22, TiAlN Finish, No
• Extension Tap: M18 x 2.5, 3 Flutes, TiCN Finish, Cobalt, Long Reach 4-5 P, 30″ Thread Length, 6H Class of Fit
• Collet Chuck: ER Collet, Taper Shank Through Coolant
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.169″ ID, 0.283″ OD, 0.016″ Thick
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.3840 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.0780 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1105; Maximum Ramping Angle: 0.35 ™; Series: TG2J; Cut
• Modular Turning & Profiling Cutting Unit Head: Size C5, 65 mm Head Length, External, Right Hand 35 mm Center to Cutting Edge, Uses VN.. Inserts, Through Coolant
• Indexable Square-Shoulder End Mill: EPAV06M012C10.0R02L, 10.0000'' Shank Dia, Straight Shank Uses 2, Normal Pressure, 120.00 mm OAL
• Modular Turning & Profiling Cutting Unit Head: Size C5, 65 mm Head Length, External, Left Hand 35 mm Center to Cutting Edge, Uses VN.. Inserts, Through Coolant
• Good Sense Automatic Spray System, 19 g, Good Sense Automatic Spray System, 12/CT Good Sense Automatic Spray System
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.143″ ID, 0.999″ OD, 0.043″ Thick
• Plastic Sheet: Acetal, 2″ Thick, 6″ Long, Black, 8,500 psi Tensile Strength Rockwell M-90
• Helical Flute Thread Mill: Internal, 3 Flute, 1/4″ Shank Dia, Solid Carbide 0.183″ Cut Dia, 0.79″ LOC, 2.5″ OAL, TiCN Coated
• Collet Chuck: 2 to 20 mm Capacity, ER Collet, Taper Shank 3″ Projection, 0.0001″ TIR, Balanced to 25,000 RPM, Through Coolant
• Replaceable Tip Drill: 0.591 to 0.626'' Drill Dia, 1.91″ Max Depth, 0.75'' Straight-Cylindrical Shank Uses H3P Inserts, 4.97″ OAL, Through Coolant
• Power Supply: Use with MSA
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.096″ ID, 3/8″ OD, 0.056″ Thick
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.9449; Drill Diameter (mm): 24.00; Maximum Drill Depth (mm): 48.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Collet Chuck: 0.5 to 10 mm Capacity, ER Collet, Straight Shank 100 mm Projection, 0.003 mm TIR, Through Coolant
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.8268; Drill Diameter (mm): 21.00; Maximum Drill Depth (mm): 42.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Collet Chuck: 0.5 to 10 mm Capacity, ER Collet, Straight Shank 75 mm Projection, 0.003 mm TIR, Through Coolant
• DOT Conspicuity Tape; Color: Yellow; Tape Material: Reflective Sheeting; Width (Inch): 1-3/4; Length (Feet): 150
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.7874; Drill Diameter (mm): 20.00; Maximum Drill Depth (mm): 40.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Replaceable Tip Drill: 15 to 15.9 mm Drill Dia, 48.47 mm Max Depth, 20 mm Straight-Cylindrical Shank Uses H3P Inserts, 126.16 mm OAL, Through Coolant
• Visual Signal Device Accessories; Signal Device Accessory Type: Wall Mount; Overall Length (Decimal Inch): Various; Overall Width/Diameter (Inch): 0.5; Overall Height (Decimal Inch): 0.5; For Use With: PAWS; Overall Height (Inch): 0.5
• Roll: Neoprene Rubber, 56″ Wide, Black Durometer 70, Plain Backing
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.9055; Drill Diameter (mm): 23.00; Maximum Drill Depth (mm): 46.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..43.; Toolholder Style: TDJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Widt
• Visual Signal Device Accessories; Signal Device Accessory Type: Wall Mount; Overall Length (Decimal Inch): 91; Overall Width/Diameter (Inch): 3; Overall Height (Decimal Inch): 1; For Use With: PAWS; Overall Height (Inch): 1
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.861″ OD, 0.031″ Thick
• Helical Flute Thread Mill: 1/16-1/8, Internal, 3 Flute, 1/4″ Shank Dia, Solid Carbide 0.245″ Cut Dia, 0.63″ LOC, TiAlN Coated
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.8661; Drill Diameter (mm): 22.00; Maximum Drill Depth (mm): 44.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..43.; Toolholder Style: TDJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Width
• Plastic Sheet: Acetal, 3/4″ Thick, Black Rockwell M-90
• Collet Chuck: ER Collet, 1″ Shank Dia, Straight Shank 50 mm Projection
• End Mill Holder: CAT40 Taper Shank, 1-1/4″ Hole 4.6″ Projection, 2-1/2″ Nose Dia, Through Coolant
• Corner Chamfer End Mill: 6.00 mm Dia, 8.00 mm LOC, 4 Flute, 0.15 mm Chamfer Width, Solid Carbide
• Helical Flute Thread Mill: 1/16-1/8, Internal & External, 3 Flute, 1/4″ Shank Dia, Solid Carbide 0.245″ Cut Dia, 0.437″ LOC, TiAlN Coated
• Strip: Silicone Rubber, 3″ Wide, 120″ Long, Red Durometer 40, Plain Backing
• Zep-O-Shine Car Wash with Polymer Wax
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.099″ ID, 0.311″ OD, 0.027″ Thick
• Helical Flute Thread Mill: Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• 1/4″ Screw 1-3/4″ OAL 0.252″ ID x 5/8″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.2500; Drill Diameter (mm): 31.75; Maximum Drill Depth (Decimal Inch): 6.2500; Maximum Drill Depth (mm): 159.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/4; S
• Helical Flute Thread Mill: 1/4, Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: 1/16-1/8, Internal & External, 3 Flute, 1/4″ Shank Dia, Solid Carbide 0.24″ Cut Dia, 0.393″ LOC, TiAlN Coated
• Helical Flute Thread Mill: 1/2-20, Internal & External, 4 Flute, 3/8″ Shank Dia, Solid Carbide 20 TPI, 0.35″ Cut Dia, 7/8″ LOC, TiAlN Coated
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.3750; Drill Diameter (mm): 34.92; Maximum Drill Depth (Decimal Inch): 6.8750; Maximum Drill Depth (mm): 175.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/4; S
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.381″ OD, 0.035″ Thick
• Helical Flute Thread Mill: 1/4, Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: 1/2-13, Internal & External, 4 Flute, 3/8″ Shank Dia, Solid Carbide 13 TPI, 0.35″ Cut Dia, 7/8″ LOC, TiAlN Coated
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.3430; Drill Diameter (mm): 34.11; Maximum Drill Depth (Decimal Inch): 6.7150; Maximum Drill Depth (mm): 171.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/4; S
• Helical Flute Thread Mill: 5/16, Internal & External, 3 Flute, 1/4″ Shank Dia, Solid Carbide 0.197″ Cut Dia, 0.445″ LOC, TiAlN Coated
• Corner Chamfer End Mill: 6.00 mm Dia, 16.00 mm LOC, 4 Flute, 0.15 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.3120; Drill Diameter (mm): 33.33; Maximum Drill Depth (Decimal Inch): 6.5600; Maximum Drill Depth (mm): 167.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/4; S
• Helical Flute Thread Mill: 5/16, Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.874″ OD, 0.042″ Thick
• Helical Flute Thread Mill: 5/8, UNC, 4 Flute, Solid Carbide 11 TPI, TiSiN Coated
• Helical Flute Thread Mill: 5/16, Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Replaceable Tip Drill: 25 to 25.5 mm Drill Dia, 130 mm Max Depth, 25 mm Flange Shank Seat Size 080, 222 mm OAL, Through Coolant
• Corner Chamfer End Mill: 8.00 mm Dia, 11.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Helical Flute Thread Mill: G1/4-19 & G3/8-19, Internal, 4 Flute, Solid Carbide 19 TPI, 0.4134″ Cut Dia, TiSiN Coated
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0559MC
• Helical Flute Thread Mill: 1/16-1/8, Internal, 3 Flute, Solid Carbide TiAlN Coated
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Extra Length Drill Bit: 0.2953″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.146″ ID, 0.437″ OD, 0.027″ Thick
• Helical Flute Thread Mill: 5/16, Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: 5/8-18, Internal, 4 Flute, Solid Carbide 18 TPI, 0.4646″ Cut Dia, TiSiN Coated
• All-Purpose Cleaner: 14 gal Can Aerosol, Citrus Scent
• Helical Flute Thread Mill: Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Replaceable Tip Drill: 13 to 13.4 mm Drill Dia, 106.4 mm Max Depth, 16 mm Flange Shank Uses DMP130, DMP131, DMP132, DMP133 & DMP134 Inserts, 169.6 mm OAL, Through Coolant
• Taper Shank Drill Bit: 0.3125″ Dia, 1MT, 130 °, High Speed Steel Bright/Uncoated & Oxide, 3.937″ Flute Length, 7.126″ OAL, Cone Relief Point, Parabolic Flute
• Corner Chamfer End Mill: 8.00 mm Dia, 22.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Helical Flute Thread Mill: Internal & External, 3 Flute, 1/4″ Shank Dia, Solid Carbide 0.235″ Cut Dia, 5/8″ LOC, TiAlN Coated
• Cordless Impact Driver: 12V, 1/4″ Drive, 2,000 RPM Variable Speed, 2 Lithium-ion Battery Included
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.268″ OD, 0.03″ Thick
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 3/4″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Replaceable Drill Tips; Maximum Drill Diameter (Decimal Inch): 0.8750; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC08; Cutting Direction: Right Hand; Series: ICN; Coating Process: Uncoated; Insert Seat Size: 22; Functional Length
• Wedge Clamps; Wedge Clamp Style: Vise; Single or Double Wedge: Single; Screw Thread Size: 5/16-18 in; Machinable: No; Holding Force: 3306.93 lb; Overall Width: 26.92 mm; 1.06 in; Base Height: 0.59 in; 14.99 mm; Base Width: 26.92 mm; 1.06 in; Base Depth: 2
• Corner Chamfer End Mill: 10.00 mm Dia, 13.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.407″ OD, 0.028″ Thick
• Machining Chuck Jaws & Accessories; Accessory Type: Jaw; Fixed: No; Jaw Hardness: Soft; Jaw Type: Top Jaw; For Use With: Machining Chucks; Material: Steel; Jaw Width (mm): 29.97; Jaw Width (Decimal Inch): 1.1800; Jaw Length (mm): 70.10; Jaw Length (Decima
• Sheet: Silicone Rubber, 36″ Wide, 36″ Long, Clear Durometer 50 to 60
• Black 45 ° Elbow: 4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Helical Flute Thread Mill: Metric, 3 Flute, 5/16″ Shank Dia, Solid Carbide 0.309″ Cut Dia, 0.796″ LOC, 2-1/2″ OAL TiN-T21 Coated
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.162″ ID, 0.387″ OD, 0.041″ Thick
• Adult CPR Pad for Defibrillators For Use with Powerheart G5 AED
• Sheet: Buna-N Rubber, 1″ Thick, 12″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Ball Valve Fittings, Handles & O-Ring Kits; Type: Mounting Kit; For Use With: 86R; 83R; 401R Aeries 1-1/4 to 3 in Valves; 89AR; 71-AR; 77-AR; 76-AR; For Use With: 86R; 83R; 401R Aeries 1-1/4 to 3 in Valves; 89AR; 71-AR; 77-AR; 76-AR; For Use With: 86R; 83
• Plastic Sheet: Acetal, 1-1/4″ Thick, White Rockwell M-90
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.15″ ID, 0.314″ OD, 0.021″ Thick
• 20mm Cut Diam, 21mm Max Depth, 20mm Shank Diam, 110mm OAL, Indexable Repeater Shoulder End Mill
• Indexable Grooving Toolholder: KGBFR1220H16FJCT, External Right Hand, Uses GBF32R Inserts, Through Coolant
• Coveralls: Size 5X-Large, PVC on 150D Polyester Green, 31″ Inseam, Snaps & Zipper Closure
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.151″ ID, 5/8″ OD, 0.055″ Thick
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Roll: Silicone Rubber, 36″ Wide, Semi-Clear Durometer 60, Plain Backing
• Taper Length Drill Bit: 0.4331″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Single Profile Thread Mill: 1/2-13 & 1/2-20, 13 to 20 TPI, Internal, 5 Flutes, Solid Carbide 0.407″ Cut Dia, 1/2″ Shank Dia, TiN-T21 Coated
• Indexable Grooving Toolholder: GFVSR2020K08AA, External Right Hand, No
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.15″ ID, 0.268″ OD, 0.044″ Thick
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Diameter (Inch)
• Indexable Grooving Toolholder: KFMSR2525M1001504, External Right Hand, No
• Indexable Grooving Toolholder: S12FSTWL15, External Left Hand, No
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.146″ ID, 0.719″ OD, 0.045″ Thick
• Indexable Grooving Toolholder: KFMSL2525M801158, External Left Hand, No
• Taper Length Drill Bit: 0.2283″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Taper Length Drill Bit: 0.2344″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Indexable Grooving Toolholder: KFMSL2525M851103, External Left Hand, No
• Corner Chamfer End Mill: 10.00 mm Dia, 25.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Taper Length Drill Bit: 0.2362″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Indexable Grooving Toolholder: KFMSL2525M701004, External Left Hand, No
• Taper Length Drill Bit: 0.2402″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.41″ OD, 0.035″ Thick
• Indexable Grooving Toolholder: KFMSR2525M35504, External Right Hand, No
• Taper Length Drill Bit: 0.2570″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Coiled & Self Storing Hose: 1/4″ ID, 25' Long, MNPT (Swivel) x MNPT (Swivel) 155 Max psi, Blue
• Indexable Grooving Toolholder: KFMSR2525M25303, External Right Hand, No
• Indexable Grooving Toolholder: KFMSR2525M801158, External Right Hand, No
• Corner Chamfer End Mill: 12.00 mm Dia, 16.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• Indexable Grooving Toolholder: KFMSR2525M851103, External Right Hand, No
• Indexable Threading Toolholder: Right Hand, 1.25 x 1.25″ Shank Series Laydown Threading
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.164″ ID, 0.31″ OD, 0.007″ Thick
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Diameter (Decimal Inch): 0.8661; Shank Diameter (mm): 22.00; Inser
• Toner Cartridge: Cyan Use with HP Color Laserjet Pro MFP M180nw (T6B74A#BGJ)
• Indexable Thread Mills; Cutting Diameter: 1.2600 in; Maximum Hole Depth (Decimal Inch): 1.2600 in; Maximum Hole Depth (mm): 1.2600 in; Maximum Cutting Length: 1.2600 in; Compatible Insert Style: LYEU; Compatible Insert Size Code: 32..; Toolholder Style: 2
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Diameter (Inch)
• Extra Length Drill Bit: 0.3071″ Dia, 130 °, High Speed Steel Uncoated, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• Modular Tool Holding System Adapter: C8 Modular Connection Through Coolant
• Indexable Ball Nose End Mills; Cutting Diameter (Decimal Inch): 5/8; Maximum Depth of Cut (Decimal Inch): 0.6250; Maximum Depth of Cut (Inch): 5/8; Shank Type: Straight Shank; Shank Diameter (Inch): 5/8; Toolholder Style: i-Xmill; Number of Ball Nose Inse
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Indexable Ball Nose End Mills; Cutting Diameter (Decimal Inch): 1/2; Maximum Depth of Cut (Decimal Inch): 0.5313; Maximum Depth of Cut (Inch): 17/32; Shank Type: Straight Shank; Shank Diameter (Inch): 1/2; Toolholder Style: i-Xmill; Number of Ball Nose In
• Indexable Grooving Toolholder: GFVSR2020K351B, External Right Hand, No
• Truck & Trailer Wash Truck & Trailer Wash
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Diameter (Inch)
• Indexable Ball Nose End Mills; Cutting Diameter (mm): 17; Maximum Depth of Cut (Decimal Inch): 0.5906; Maximum Depth of Cut (mm): 15.00; Shank Type: Straight Shank; Shank Diameter (mm): 16.0000; Toolholder Style: i-Xmill; Number of Ball Nose Inserts Used
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.7874; Drill Diameter (mm): 20.00; Maximum Drill Depth (mm): 100.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cuttin
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Diameter (Inch)
• Indexable Ball Nose End Mills; Cutting Diameter (mm): 16; Maximum Depth of Cut (Decimal Inch): 0.5906; Maximum Depth of Cut (mm): 15.00; Shank Type: Straight Shank; Shank Diameter (mm): 16.0000; Toolholder Style: i-Xmill; Number of Ball Nose Inserts Used
• All-Purpose Cleaner: 3.78 gal Bottle Liquid, Fresh Pine Scent
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.8071; Drill Diameter (mm): 20.50; Maximum Drill Depth (mm): 102.50; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cuttin
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Diameter (Inch)
• Indexable Ball Nose End Mills; Cutting Diameter (Decimal Inch): 5/8; Maximum Depth of Cut (Decimal Inch): 0.6250; Maximum Depth of Cut (Inch): 5/8; Shank Type: Straight Shank; Shank Diameter (Inch): 5/8; Toolholder Style: i-Xmill; Number of Ball Nose Inse
• Painless Stainless Steel Cleaner Stainless Steel Cleaner
• Metering Pump Accessories; Type: Repair Kit; For Use With: CP500V300CRTC; Length (Decimal Inch): 7.0000; For Use With: CP500V300CRTC
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.8661; Drill Diameter (mm): 22.00; Maximum Drill Depth (mm): 110.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cuttin
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Diameter (Decimal Inch): 0.8661; Shank Diameter (mm): 22.00; Inser
• Indexable Ball Nose End Mills; Cutting Diameter (mm): 12; Maximum Depth of Cut (Decimal Inch): 0.5118; Maximum Depth of Cut (mm): 13.00; Shank Type: Straight Shank; Shank Diameter (mm): 12.0000; Toolholder Style: i-Xmill; Number of Ball Nose Inserts Used
• Die Drill Bit: 25/32″ Dia, 135 °, Solid Carbide Uncoated, 1-1/2″ Flute, 4″ OAL, Series 200
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.152″ ID, 0.254″ OD, 0.016″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.8268; Drill Diameter (mm): 21.00; Maximum Drill Depth (mm): 105.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cuttin
• Corner Chamfer End Mill: 12.00 mm Dia, 28.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• Indexable Grooving Toolholder: KFMSL2525M1001504, External Left Hand, No
• Indexable High-Feed End Mill: 32 mm Cut Dia, 1.25 mm Cylindrical Shank Uses 3 UNLU Inserts, 1.52 mm Max Depth, 220 mm OAL, Through Coolant
• Roll: Neoprene Rubber, 12″ Wide, Black Durometer 40, Plain Backing
• Corner Chamfer End Mill: 14.00 mm Dia, 16.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.1654; Drill Diameter (mm): 55.00; Maximum Drill Depth (mm): 165.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Cordless Impact Wrench: 12V, 3/8″ Drive, 3,600 BPM, 2,400 RPM 2 CXT Battery Included, Charger Included
• Helical Flute Thread Mill: 1-11-1/2 to 2-11-1/2, Internal & External, 4 Flute, 5/8″ Shank Dia, Solid Carbide 11-1/2 TPI, 0.62″ Cut Dia, 1-1/8″ LOC, 4″ OAL, AlTiN Coated
• Indexable Boring Bar: A16T-TDUNR-3, 1.00 mm Shank Dia, 93.00&deg N/A Steel 12.0000″ OAL, Clamp,
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.0472; Drill Diameter (mm): 52.00; Maximum Drill Depth (mm): 156.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.31″ OD, 0.026″ Thick
• Indexable Boring Bar: A16T-TTFNR-3, 1.00 mm Shank Dia, 91.00&deg N/A Steel 12.0000″ OAL, Clamp,
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.1260; Drill Diameter (mm): 54.00; Maximum Drill Depth (mm): 162.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Taper Length Drill Bit: 0.2362″ Dia, 135 ° TX Finish, 2.2441″ Flute Length, 3.7402″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Corner Chamfer End Mill: 14.00 mm Dia, 30.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• General Purpose Wipes: Box, 16.5 x 9.333″ Sheet, White
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.0866; Drill Diameter (mm): 53.00; Maximum Drill Depth (mm): 159.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.0079; Drill Diameter (mm): 51.00; Maximum Drill Depth (mm): 153.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Indexable Boring Bar: A16T-TWLNL-4, 1.00 mm Shank Dia, 95.00&deg N/A Steel 12.0000″ OAL, Clamp,
• Taper Length Drill Bit: 0.2205″ Dia, 135 ° TX Finish, 2.2441″ Flute Length, 3.7402″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Indexable Boring Bar: A16T-TTFNL-3, 1.00 mm Shank Dia, 91.00&deg N/A Steel 12.0000″ OAL, Clamp,
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.147″ ID, 0.409″ OD, 0.042″ Thick
• Taper Length Drill Bit: 0.2047″ Dia, 135 ° TX Finish, 2.2441″ Flute Length, 3.7402″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Ball Grip Quick-Release Pin: Button Handle, 3/4″ Pin Dia, 5″ Usable Length 6.68″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.7480; Drill Diameter (mm): 19.00; Maximum Drill Depth (mm): 95.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Indexable Boring Bar: A16T-TWLNR-3, 1.00 mm Shank Dia, 95.00&deg N/A Steel 12.0000″ OAL, Clamp,
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.7677; Drill Diameter (mm): 19.50; Maximum Drill Depth (mm): 97.50; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Indexable Boring Bar: A16T-TWLNR-4, 1.00 mm Shank Dia, 95.00&deg N/A Steel 12.0000″ OAL, Clamp,
• Plastic Rod: Garolite (G-10 & FR4), 4' Long, 1″ Dia, Yellow Rockwell M-110
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.374″ OD, 0.027″ Thick
• EPDM Foam: 2″ Wide, 120″ Long, Black Acrylic Adhesive Backing
• Wet & Dry Cut Saw Blade: 6″ Dia, 7/8 & 5/8″ Arbor Hole, 0.08″ Kerf Width, 9 Teeth High Speed Steel Teeth, Use on Masonry, Standard Arbor
• 2-Speed Fan Guard For 36″ MSC #37955507
• Guhring GH305.0500.500.90.04.L External Left Hand Face Grooving 90 Deg Offset Non Coolant Holder 1/2″ Square Shank
• Indexable Boring Bar: A08XSTLPL0810AE, 10.00 mm Min Bore, 8.00 mm Shank Dia, N/A Steel Screw, Uses TPGT1515 ™, TPGH1515 ™, TPET1515 ™, TPGB1515 ™ & TPMH1515 ™ Inserts
• 7/32″ Shaft Diam, 0.193″ Groove Diam, Spring Steel External C Style Retaining Ring 0.275″ Free OD, 0.187″ Free ID, 0.029″ Groove Width x 0.013″ Groove Depth, 0.025″ Ring Thickness, Grade 1060-1090
• Kyocera MEV 080R067T Inch Bore Diameter, Coarse Pitch, 7 Flute, 90 Degree Face Mill with a 80.00mm Cutting Diameter for Facing, Helical Milling, Plunging, Pocketing, Ramping, Shouldering, Slotting Applications
• Guhring GH305.0500.500.90.06.L External Left Hand Face Grooving 90 Deg Offset Non Coolant Holder 1/2″ Square Shank
• Indexable Boring Bar: A08XSTLPL0910AE, 10.00 mm Min Bore, 8.00 mm Shank Dia, N/A Steel Screw, Uses TPGT1815 ™, TPMT1815 ™, TPMX1815 ™, TPEH1815 ™, TPGH1815 ™, TPGB1815 ™ & TPMH1815 ™ Inserts
• Guhring GH305.0500.500.90.04.R External Right Hand Face Grooving 90 Deg Offset Non Coolant Holder 1/2″ Square Shank
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.346″ OD, 0.035″ Thick
• Kyocera MEV 080R067TM Metric Bore Diameter, Coarse Pitch, 7 Flute, 90 Degree Face Mill with a 80.00mm Cutting Diameter for Facing, Helical Milling, Plunging, Pocketing, Ramping, Shouldering, Slotting Applications
• Indexable Boring Bar: A08XSTLCL0910AE, 10.00 mm Min Bore, 8.00 mm Shank Dia, N/A Steel Screw, Uses TCMX1815 ™ & TCMT1815 ™ Inserts
• Guhring GH305.0500.500.90.06.R External Right Hand Face Grooving 90 Deg Offset Non Coolant Holder 1/2″ Square Shank
• Indexable Boring Bar: A08XSTLCR0910AE, 10.00 mm Min Bore, 8.00 mm Shank Dia, N/A Steel Screw, Uses TCMX1815 ™ & TCMT1815 ™ Inserts
• Indexable Boring Bar: A08XSTLPR0910AE, 10.00 mm Min Bore, 8.00 mm Shank Dia, N/A Steel Screw, Uses TPGT1815 ™, TPMT1815 ™, TPMX1815 ™, TPEH1815 ™, TPGH1815 ™, TPGB1815 ™ & TPMH1815 ™ Inserts
• Nails For Power Nailers
• PPE Dispensers; Type: Wellness Station; Mount: Table/Wall; Overall Length: 5.55 in; Height (Inch): 18 in; 18; Width (Inch): 24; Material: ABS Plastic; Rigid Plastic; Color: Yellow; Black; Width (Decimal Inch): 24 in; Overall Height: 18 in
• Replaceable Tip Drill: 10 to 10.4 mm Drill Dia, 42 mm Max Depth, 12 mm Straight-Cylindrical Shank Uses DMP Inserts, 114.03 mm OAL, Through Coolant
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Strip: Buna-N Rubber, 6″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Indexable Threading Toolholder: External, Left Hand Series ALCN
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.438″ OD, 0.033″ Thick
• Beam Clamps & C-Clamps; Type: Screwlock Beam Clamp; Maximum Flange Width: 9; Load Capacity (Lb.): 4000.000; Finish/Coating: Enamel; Minimum Flange Width: 3; Type: Screwlock Beam Clamp
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Adhesive Backed Floor Signs; Message Type: COVID-19; Graphic Type: Arrows; Message or Graphic: Message & Graphic; Legend: Thank You Social Distancing 6', Distancia Social Gracias; Color: White; Yellow; Black; Special Color Properties: No Special Propertie
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2047; Diameter (mm): 30.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating; I
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• 8.50mm Minor 0.3346″ Minor 12.00mm Major 0.4724″ Major 140&deg General Purpose Solid Carbide Subland Step Drill Bit TiAlNFinish, 55.00mm Flute Length, 102.00mm OAL, N/A
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 1/4″ OD, 0.026″ Thick
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2520; Diameter (Inch): 1-1/4; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating;
• Adhesive Backed Floor Signs; Message Type: COVID-19; Graphic Type: Shoeprints; Message or Graphic: Message & Graphic; Legend: Maintain Social Distance 6Ft Stand Here, Mantenga La Distancia Social 2M Parase Aqui; Color: White; Yellow; Black; Special Color
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2189; Diameter (Inch): 1-7/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating
• Ball Grip Quick-Release Pin: Button Handle, 3/4″ Pin Dia, 1-1/2″ Usable Length 3.18″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Metering Pump Accessories; Type: Seal Kit; For Use With: CP125V125CRTG; Length (Decimal Inch): 7.0000; For Use With: CP125V125CRTG
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2559; Diameter (mm): 31.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating; I
• Metering Pump Accessories; Type: Seal Kit; For Use With: CP125V125CRPE; Length (Decimal Inch): 7.0000; For Use With: CP125V125CRPE
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2087; Diameter (mm): 30.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating; I
• Metering Pump Accessories; Type: Seal Kit; For Use With: CP250V225TC; Length (Decimal Inch): 7.0000; For Use With: CP250V225TC
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.381″ OD, 0.054″ Thick
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2500; Diameter (Inch): 1-1/4; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating;
• Metering Pump Accessories; Type: Seal Kit; For Use With: CP250V225CRPE; Length (Decimal Inch): 7.0000; For Use With: CP250V225CRPE
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2031; Diameter (Inch): 1-13/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coatin
• Metering Pump Accessories; Type: Seal Kit; For Use With: CP250V225CRA; Length (Decimal Inch): 7.0000; For Use With: CP250V225CRA
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.4724; Drill Diameter (mm): 12.00; Maximum Drill Depth (mm): 36.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2480; Diameter (Inch): 1-1/4; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating;
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.4921; Drill Diameter (mm): 12.50; Maximum Drill Depth (mm): 37.50; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Metering Pump Accessories; Type: Seal Kit; For Use With: CP125V125CRTC; Length (Decimal Inch): 7.0000; For Use With: CP125V125CRTC
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 80, Acrylic Adhesive Backing
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2008; Diameter (mm): 30.50; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating; I
• Metering Pump Accessories; Type: Seal Kit; For Use With: CP250V225CRTG; Length (Decimal Inch): 7.0000; For Use With: CP250V225CRTG
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.5118; Drill Diameter (mm): 13.00; Maximum Drill Depth (mm): 39.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.103″ ID, 0.247″ OD, 0.017″ Thick
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 39.00; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: IFP; Coating Process: PVD; Insert Seat Size: 39; Functional Length (mm): 16.07; Pr
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2126; Diameter (mm): 30.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating; I