Products

• Helical Flute Thread Mill: 3/4-10, UNC, 4 Flute, 5/8″ Shank Dia, Solid Carbide 10 TPI, 0.621″ Cut Dia, 1.548″ LOC, 4-1/4″ OAL, TiN-T21 Coated
• Taper Length Drill Bit: 0.5906″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Indexable Boring Bar: E10R-SDUCR-2, 93.00&deg N/A Solid Carbide 8.0000″ OAL, Screw,
• Indexable Grooving Blade: 36 mm High, Left Hand, 5 mm Min Width 32 mm Max Depth of Cut
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0188; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Anti-Fatigue Mat: 12.3' Length, 3.2' Wide, 7/16″ Thick, Nitrile Foam, Heavy-Duty Ribbed, Black, Dry
• Adhesive Backed Floor Signs; Message Type: COVID-19; Graphic Type: Arrows; Message or Graphic: Message & Graphic; Legend: Thank You Social Distancing 6', Distancia Social Gracias; Color: White; Yellow; Black; Special Color Properties: No Special Propertie
• Indexable Grooving Blade: 32 mm High, Left Hand, 4 mm Min Width 30 mm Max Depth of Cut
• Threaded Rod: #10-24, 3' Long, Titanium, Grade 2 UNC, Right Hand Thread
• Indexable Boring Bar: E10R-STFCR-2, 91.00&deg N/A Solid Carbide 8.0000″ OAL, Screw,
• Adhesive Backed Floor Signs; Message Type: COVID-19; Graphic Type: Arrow; Message or Graphic: Message & Graphic; Legend: Arrow Graphic; Color: Yellow; Black; Special Color Properties: No Special Properties; Material: Vinyl; Shape: Circle; Oval; Height (In
• Indexable Grooving Blade: 32 mm High, Left Hand, 4 mm Min Width 25 mm Max Depth of Cut
• Indexable Boring Bar: E10R-SCLCL-3, 95.00&deg N/A Solid Carbide 8.0000″ OAL, Screw,
• Adhesive Backed Floor Signs; Message Type: COVID-19; Graphic Type: Arrow; Message or Graphic: Message & Graphic; Legend: One Way; Color: White; Green; Special Color Properties: No Special Properties; Material: Vinyl; Shape: Circle; Oval; Height (Inch): 8.
• Indexable Grooving Blade: 32 mm High, Right Hand, 5 mm Min Width 30 mm Max Depth of Cut
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 2″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Adhesive Backed Floor Signs; Message Type: COVID-19; Graphic Type: Wear Mask; Message or Graphic: Message & Graphic; Legend: Face Mask Or Face Covering Required; Color: White; Blue; Special Color Properties: No Special Properties; Material: Vinyl; Shape:
• Black Hex Bushing: 6 x 2″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Indexable Boring Bar: S25RPTUNL1630, 30.00 mm Min Bore, 25.00 mm Shank Dia, N/A Steel Lever Lock & Lock Pin, Uses TNMG33 ™, TNGG33 ™, TNGA33 ™ & TNMM33 ™ Inserts
• Adhesive Backed Floor Signs; Message Type: COVID-19; Graphic Type: Wear Mask; Message or Graphic: Message & Graphic; Legend: Face Mask Or Face Covering Required; Color: White; Blue; Special Color Properties: No Special Properties; Material: Vinyl; Shape:
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0055; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Air Compressor & Vacuum Pump Accessories; Type: Pre-Filter Element; For Use With: IR Air Compressors; Type: Pre-Filter Element; Type: Pre-Filter Element; Type: Pre-Filter Element; For Use With: IR Air Compressors; Type: Pre-Filter Element
• Indexable Grooving Toolholder: MGI20201A, Internal Right Hand, No
• Dust Pan: Plastic Body, 30″ Plastic Handle 13″ Wide
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Indexable Grooving Toolholder: GIFVR3532B201A, Internal Right Hand, No
• Indexable Ball Nose End Mills; Cutting Diameter (mm): 12.00; Maximum Depth of Cut (mm): 5.00; Shank Type: Straight Shank; Shank Diameter (mm): 16.0000; Toolholder Style: MRF; Number of Ball Nose Inserts Used on Toolholder: 1; Insert Style: RDFG12FR; Serie
• Plastic Sheet: Acetal, 3/8″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 24' Long x 18' Wide, 16 mil Polyethylene, Rectangle
• All-Purpose Cleaner: 2 gal Bottle Liquid, Odorless Scent
• Plastic Sheet: Acetal, 3/8″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Hex Head Cap Screw: 7/16-14 x 6″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Free Standing Chain-Rope Barrier Post: 40″ High, 2-1/2″ Dia, Steel Post Concrete Dome Base
• 1″ Screw 2″ OAL 1″ ID x 2″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 63.5 mm; Housing Material: Thermoplastic; Lock Type: Set Screw; Static Load Capacity: 1225.00; Number Of Bolts: 4; Maximum RPM: 6490.000; Series: UCFPL;
• Lab Coat: Size Large, SMS White
• General Purpose Wipes: Center Pull, White
• Indexable Chamfer & Angle End Mills; Minimum Cutting Diameter (Decimal Inch): 0.3300; Maximum Cutting Diameter (Inch): 1/2; Maximum Cutting Diameter (Decimal Inch): 0.5000; Lead Angle: 60; Maximum Depth of Cut (Decimal Inch): 0.1250; Compatible Insert Siz
• Lab Coat: Size Medium, SMS White
• Vise Jaw Accessory: Shelf Plastic, Includes (1) Lower Shelf for 6″ Leveling Tripod Chain Vise 48-22-8695
• Hose Crimping Accessories; Type: 91N Series Dies; For Use With: 919 Series; 929 Series; Hose Size: -4; Material: PTFE; Color: Red; Tube Outside Diameter: 0.355 in; Material: PTFE; PSC Code: 5120; Minimum Order Quantity: PTFE; Tube Outside Diameter (Inch):
• Single Profile Thread Mill: 5/16-18 & 5/16-24, 18 to 24 TPI, Internal, 4 Flutes, Solid Carbide 0.242″ Cut Dia, 1/4″ Shank Dia, TiN-T21 Coated
• Sheet: Silicone Rubber, 12″ Wide, 36″ Long, Red Durometer 70, High Temperature Adhesive Backing
• 3/4″ Screw 1/4″ OAL 3/4″ ID x 1-1/2″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Indexable Insert Drills; Drill Style: GDH; Maximum Drill Diameter (Inch): 1/2; Maximum Drill Diameter (Decimal Inch): 0.5000; Maximum Drill Depth (Decimal Inch): 1.7240; Shank Type: Flatted; Shank Diameter (Decimal Inch): 0.4800; Number of Drill Inserts:
• 5C Collets 6″ 5C STEP COLLET
• Wheel Brushes; Wire Type: Knotted; Outside Diameter (Inch): 12; Arbor Hole Thread Size: 5/8; Arbor Hole Style: Round; Arbor Hole Size: 1-1/4; Fill Material: Steel; Filament Wire Diameter Range: 0.0100-0.0199; Maximum Rpm: 3600.000; Wire Knot Type: Standar
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank 1.65″ Projection, 0.94″ Nose Dia, Through Coolant
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank 1.42″ Projection, 1.06″ Nose Dia, Through Coolant
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank 1.85″ Projection, 1.06″ Nose Dia, Through Coolant
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank 1.85″ Projection, 0.94″ Nose Dia, Through Coolant
• Manual Ball Valve: 3/4″ Pipe, Full Port, Stainless Steel 2-Piece, FNPT, 1,000 psi WOG
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank 1.42″ Projection, 0.83″ Nose Dia, Through Coolant
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank 1.97″ Projection, 1.06″ Nose Dia, Through Coolant
• Hose Reel with Hose: 3/8″ ID Hose x 15' 300 psi
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 17; Cutting Width (Decimal Inch): 17; Cutting Width (Inch): 17
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank 2.05″ Projection, 1.3″ Nose Dia, Through Coolant
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank, 1″ Hole Dia 2.28″ Projection, 1.73″ Nose Dia, Through Coolant
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• 180 Grit Aluminum Oxide Triangular Polishing Stone Coarse Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• Helical Flute Thread Mill: 3/4, Internal & External, 4 Flute, Solid Carbide 14 TPI, TiAlN Coated
• Hex Head Cap Screw: 1-8 x 8″, Grade 8 Steel, Uncoated Partially Threaded, ASME B18.2.1
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Shrink-Fit Tool Holder & Adapter: 1/8″ Shank Dia, Taper Shank 3.14″ Projection, 0.36″ Nose Dia, Through Coolant
• Helical Flute Thread Mill: 3/8-18, Internal & External, 4 Flute, 3/8″ Shank Dia, Solid Carbide 18 TPI, 0.305″ Cut Dia, 5/8″ LOC, TiAlN Coated
• 320 Grit Aluminum Oxide Rectangular Polishing Stone Coarse/Medium Grade, 3/4″ Wide x 6″ Long x 1/4″ Thick
• Helical Flute Thread Mill: #1, Internal & External, 6 Flute, 5/8″ Shank Dia, Solid Carbide 0.62″ Cut Dia, 1-3/8″ LOC, TiAlN Coated
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2501MC
• Helical Flute Thread Mill: #1, Internal, 4 Flute, Solid Carbide TiAlN Coated
• 400 Grit Aluminum Oxide Rectangular Polishing Stone Medium Grade, 3/4″ Wide x 6″ Long x 1/4″ Thick
• Sheet: Buna-N Rubber, 36″ Wide, 60″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Helical Flute Thread Mill: Internal & External, 5 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: Internal & External, 5 Flute, 5/8″ Shank Dia, Solid Carbide 0.62″ Cut Dia, 1.418″ LOC, TiAlN Coated
• Collet Nuts & Locknuts; Product Type: Clamping Nut; Collet Series: ER40; Coolant Through: No
• Helical Flute Thread Mill: 7/8, Internal & External, 4 Flute, Solid Carbide TiAlN Coated
• Roll: Neoprene Rubber, 12″ Wide, Black Durometer 40, Plain Backing
• Helical Flute Thread Mill: Internal & External, 4 Flute, Solid Carbide TiAlN Coated
• RH AABW 0° (Axial), 0° (Radial)° Positive Rake Indexable Turning Toolholder 45° Lead Angle, 5/8″ x 5/8″ Shank, Takes ABW15R ™ Inserts
• Cordless Impact Wrench: 20V, 1/4″ Drive, 3,800 BPM, 2,900 RPM V20 Battery Included, Charger Not Included
• Roll: SBR Rubber, 36″ Wide, Black Durometer 75, Acrylic Adhesive Backing
• Flexible Cylinder Hone: 6-1/2″ Max Bore Dia, 320 Grit, Aluminum Oxide 18″ OAL
• Plastic Sheet: Acetal, 1″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Diamond Pattern Router Bit: 2″ LOC, 1/4″ Shank Dia, End Mill 4″ OAL, Solid Carbide, Amorphous Diamond Finish
• Power Tool Battery: 20V, Lithium-ion
• Sheet: Neoprene Rubber, 36″ Wide, 60″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Plastic Sheet: Acetal, 1″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Tap Collet: ANSI 1, 0.194″ #10 - 3/16 Tap
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• Sensor Accessories; Sensor Accessory Type: Hardwired Transmitter; Sensor Accessory Type: Hardwired Transmitter; For Use With: Wireless Activation For Automatic Door Operators; For Use With: Wireless Activation For Automatic Door Operators; Amperage: 0.50;
• Oxygen/Acetylene Torch Tips; Tip Number: 5
• Black Reducing Coupling: 3 x 1″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Oxygen/Acetylene Torch Tips; Tip Number: 8
• Tire Chains; For Use With: 30/9.5R16.5; 255/55R19; 255/50R20; 275/70R15; 255/80R15; 285/45R19; 265/50R20; 31/10.5R17; 31/10.5R16; 29/10.5R15; 275/60R16; 265/60R17.5; 29/11.5R15; 275/45R20; 235/75R17; 245/75R17; 255/60R18; 10R16.5; 265/60R17; 245/60R18; 25
• Indexable Broaching Toolholders; Nose Diameter (mm): 35.00; Overal Length (mm): 249.00; Projection Length (mm): 140.00; Shank Diameter (mm): 32.0000; Shank Length (mm): 100.000
• Mechanics Drill Bit: 0.323″ Dia, 135 ™, Solid Carbide TiAlCr/TiSi Finish, 3.8583″ OAL, Series MDW-GS4
• All-Purpose Cleaner: 32 gal Bottle Liquid, Quaternary Scent
• Tire Chains; For Use With: 30/9.5R16.5; 255/55R19; 255/50R20; 275/70R15; 255/80R15; 285/45R19; 265/50R20; 31/10.5R17; 31/10.5R16; 29/10.5R15; 275/60R16; 265/60R17.5; 29/11.5R15; 275/45R20; 235/75R17; 245/75R17; 255/60R18; 10R16.5; 265/60R17; 245/60R18; 25
• Mechanics Drill Bit: 23/64″ Dia, 135 ™, Solid Carbide TiAlCr/TiSi Finish, 3.8583″ OAL, Series MDW-GS4
• Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (mm): 100.00; Maximum Cutting Diameter (mm): 115.00; Maximum Depth of Cut (mm): 4.00; Arbor Hole Diameter (mm): 31.75; Lead Angle: 45; Compatible Insert Size Code: SDEN42ZTN; Cutter Style: TMD
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9371; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Motion Sensors; Mounting Type: Door Mount; Sensor Type: Infrared; Coverage (Sq. Ft.): 8; Voltage: 12-24; Amperage: 1; Color: Black; Overall Length (Decimal Inch): 10.91; Overall Height (Decimal Inch): 1-1/2; For Use With: Revolving; Automatic Swinging; Fo
• Indexable Boring Bar: A32SDSKNR1240, 40.00 mm Min Bore, 32.00 mm Shank Dia, N/A Steel Double Clamp, Uses SNMG43 ™, SNGG43 ™ & SNGA43 ™ Inserts
• Lubricators; Lubricator Type: Standard; Port Size: 1/2 NPT; End Connections: NPT; Body Material: Aluminum Die Cast; Bowl Material: Aluminum; Minimum Working Temperature: -10 ™C; 14 ™F; Cubic Feet per Minute: 96.00; Includes Sight Glass: Yes; Drain Type:
• All-Purpose Cleaner: 1 gal Pump Spray Bottle Liquid, Lemongrass Scent
• Indexable Boring Bar: A32SDTFNL1640, 40.00 mm Min Bore, 32.00 mm Shank Dia, N/A Steel Double Clamp, Uses TNMG33 ™, TNMX33 ™, TNGG33 ™, TNGA33 ™ & TNMM33 ™ Inserts
• Lubricators; Lubricator Type: Standard; Port Size: 3/8 NPT; End Connections: NPT; Body Material: Aluminum Die Cast; Bowl Material: Aluminum; Minimum Working Temperature: -10 ™C; 14 ™F; Cubic Feet per Minute: 90.00; Includes Sight Glass: Yes; Drain Type:
• Indexable Ball Nose End Mills; Milling Diameter: 0.3750 in; Maximum Depth Of Cut: 0.1800 in; Shank Diameter: 0.3750 in; Shank Type: Cylindrical; Compatible Insert Style: GQHG; Compatible Insert Size Code: 0902; Toolholder Style: 12A5F; Series: 12A5; Overa
• All-Purpose Cleaner: 1 gal Bottle Liquid, Sassafras Scent
• Indexable Boring Bar: A32SDDUNL1540, 40.00 mm Min Bore, 32.00 mm Shank Dia, N/A Steel Double Clamp, Uses DNMG43 ™, DNMX43 ™, DNGG43 ™, DNGA43 ™ & DNMM43 ™ Inserts
• Indexable Boring Bar: A32SDCLNL1240, 40.00 mm Min Bore, 32.00 mm Shank Dia, N/A Steel Double Clamp, Uses CNMG43 ™, CNMM43 ™, CNGG43 ™, CNMA43 ™ & CNGA43 ™ Inserts
• Grooving Tool: LH Cut Solid Carbide
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 2″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Grooving Tool: RH Cut Solid Carbide
• Grooving Tool: LH Cut Solid Carbide
• Indexable High-Feed End Mill: 35 mm Cut Dia, 1.14 mm Modular Shank Uses 3 UNLU Inserts, 2 mm Max Depth, 43 mm OAL, Through Coolant
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Corner Radius End Mill: 3/8" Dia, 1/2" LOC, 0.0300" Radius, 4 Flute, Solid Carbide
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1.13″ Modular Shank Uses 4 UNLU Inserts, 0.06″ Max Depth, 1.57″ OAL, Through Coolant
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Indexable High-Feed End Mill: 25 mm Cut Dia, 0.98 mm Cylindrical Shank Uses 3 UNLU Inserts, 1.52 mm Max Depth, 200 mm OAL, Through Coolant
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Pin & Sleeve Receptacles; Receptacle/Part Type: Receptacle; Pin Configuration: 4; Number of Poles: 3; IEC Pin & Sleeve Style: IEC 60309-2; IEC 60309-1; Amperage: 60 A; Hub Size (Inch): 1 in; Resistance Features: Water-Tight; Number Of Phases: 3; Number Of
• Sheet: SBR Rubber, 24″ Wide, 36″ Long, Black Durometer 75, Plain Backing
• Grooving Tool: LH Cut Solid Carbide
• Indexable Thread Mills; Cutting Diameter: 0.9400 in; Maximum Hole Depth (Decimal Inch): 0.8270 in; Maximum Hole Depth (mm): 0.8270 in; Maximum Cutting Length: 0.8270 in; Compatible Insert Style: LYEU; Compatible Insert Size Code: 30..; Toolholder Style: M
• Grooving Tool: RH Cut Solid Carbide
• Indexable Counterbores; Counterbore Diameter (Inch): 1.6250 in; Counterbore Diameter (Fractional Inch): 1-5/8 ; Maximum Counterbore Depth (Decimal Inch): 0.4000 in; Shank Diameter (Inch): 1.2500; Shank Diameter (mm): 1.2500; Shank Diameter (Fractional Inc
• Key Switches; Switch Type: Flush Mount; Switch Sequence: On-Off; Contact Form: DPDT; Actuator Type: Switch; Key; Terminal Type: Spring; Voltage: 30; Material: Stainless Steel
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• ER to ER Reducing Adapter ERM11 Inside Modular Connection, ER16 Outside Modular Connection, 18.5mm Projection, 16mm Nose Diam
• Shrink-Fit Tool Holder & Adapter: CAT40 Taper Shank, 0.25″ Hole Dia 3.15″ Projection, 0.83″ Nose Dia, 1.33″ Clamp Depth, Through Coolant
• Grooving Tool: LH Cut Solid Carbide
• Helical Flute Thread Mill: #1-8, Internal & External, 5 Flute, 3/4″ Shank Dia, Solid Carbide 8 TPI, 0.62″ Cut Dia, 1-3/8″ LOC, TiAlN Coated
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Plastic Board; Polymer Plastic Upright; Galvanized High Carbon Steel Feet; Barricade Width (Inch): 72; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 19.0000; To
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Plastic Board; Polymer Plastic Upright; Galvanized High Carbon Steel Feet; Barricade Width (Inch): 72; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 19.0000; To
• Helical Flute Thread Mill: #1-12, Internal & External, 5 Flute, 3/4″ Shank Dia, Solid Carbide 12 TPI, 0.62″ Cut Dia, 1-3/8″ LOC, TiAlN Coated
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Rubber Feet; Plastic Board; Polymer Plastic Upright; Barricade Width (Inch): 96; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 52.2500; Top Panel Height (Inch):
• Grooving Tool: RH Cut Solid Carbide
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 60, Plain Backing
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Grooving Tool: RH Cut Solid Carbide
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• 5-3/8″ 18V Cordless Metal Cutting Saw Kit 3,600 RPM, 5/8″ Arbor, 2″ Depth at 90°, Right Blade, Lithium-Ion Battery Included
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Strip: Buna-N Rubber, 6″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.159MC
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Taper Length Drill Bit: 0.3110″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Replaceable Tip Drill: 17 to 17.99 mm Drill Dia, 54 mm Max Depth, 20 mm Flange Shank Seat Size 17, 130 mm OAL, Through Coolant
• Indexable Boring Bar: S10HSCLCL0408AE, 8.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses CCGT1411 ™, CCET1411 ™, CCGW1411 ™ & CCMW1411 ™ Inserts
• Indexable Boring Bar: S10HSCLCL0407AE, 7.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses CCGT1411 ™, CCET1411 ™, CCGW1411 ™ & CCMW1411 ™ Inserts
• Indexable Boring Bar: S10HSCLCL0306AE, 6.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses CCGT1109 ™, CCET1109 ™ & CCMW1109 ™ Inserts
• Indexable Boring Bar: S10HSCLCR0306AE, 6.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses CCGT1109 ™, CCET1109 ™ & CCMW1109 ™ Inserts
• Black Tee: 1-1/2 x 1-1/2 x 1″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Ball Grip Quick-Release Pin: Button Handle, 7/8″ Pin Dia, 2″ Usable Length 3.98″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Indexable Ball Nose End Mills; Milling Diameter: 1.0000 in; Maximum Depth Of Cut: 1.1000 in; Shank Diameter: 1.0000 in; Shank Type: Cylindrical; Compatible Insert Style: NHET; Compatible Insert Size Code: 2503; Toolholder Style: 15W9X; Series: 15W7V; Over
• Sheet: Neoprene Rubber, 24″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Replaceable Tip Drill: 1.496 to 1.531'' Drill Dia, 4.48″ Max Depth, 1.25'' Flatted Shank Uses HFP-IQ Inserts, 9.25″ OAL, Through Coolant
• Automotive Sealants & Gasketing; Type: Asphalt Release Agent - Freeze Free; Container Size: 5 Gal. Pail; Minimum Temperature (F): 40.000; Maximum Temperature (F): 120.000; Color: White; Opaque; Container Type: Pail
• Cable Tools & Kits; Number of Pieces: 8.0; Number Of Pieces: 8.0
• Plastic Sheet: Acetal, 1/4″ Thick, Black Rockwell M-90
• Paints
• Coiled & Self Storing Hose: 3/16″ ID, 25' Long, MNPT (Swivel) x MNPT (Swivel) 175 Max psi, Blue
• Helical Flute Thread Mill: 5/8-11, UNC, 4 Flute, 1/2″ Shank Dia, Solid Carbide 11 TPI, 0.496″ Cut Dia, 1.316″ LOC, 3.74″ OAL, TiN-T21 Coated
• Plastic Sheet: Acetal, 1-3/4″ Thick, White Rockwell M-90
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.3750; Drill Bit Size (Inch): 0.3750; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal I
• Helical Flute Thread Mill: 9/16-18, UNF, 4 Flute, 1/2″ Shank Dia, Solid Carbide 18 TPI, 0.496″ Cut Dia, 1.138″ LOC, 3.74″ OAL, TiN-T21 Coated
• Plumbed Wash Station Accessories; Material: Stainless Steel; Height (Inch): 7 in; Length (Inch): 3 in; Overall Length: 3 in; Overall Height: 7 in
• Cordless Portable Bandsaws; Voltage: 12.00; Maximum Depth of Cut (Decimal Inch): 2-1/2; Cutting Capacity - Round: 2-1/2; Cutting Capacity
• Plastic Sheet: Polyvinylchloride, 3/8″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 90, Acrylic Adhesive Backing
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Roll: SBR Rubber, 12″ Wide, Black Durometer 60, Plain Backing
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.4173; Drill Diameter (mm): 36.00; Maximum Drill Depth (mm): 108.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cuttin
• Closed Cell Neoprene Foam: 2″ Thick, 12″ Wide, 24″ Long, Black Acrylic Adhesive Backing
• Disposable Gloves [DELETE]
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.4370; Drill Diameter (mm): 36.50; Maximum Drill Depth (mm): 110.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cuttin
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.099MC
• Plastic Sheet: Garolite, 1-1/2″ Thick, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.3780; Drill Diameter (mm): 35.00; Maximum Drill Depth (mm): 105.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cuttin
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.3976; Drill Diameter (mm): 35.50; Maximum Drill Depth (mm): 107.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cuttin
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Plastic Sheet: Garolite, 3/4″ Thick, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Indexable Cut-Off Blade Tool Blocks; Tool Block Style: EVTMZN; Blade Height (mm): 32.0000; Blade Height (Decimal Inch): 1.2598; Manufacturers Catalog Number: EVTMZN1632C; Overall Length (mm): 90.0000; Overall Length (Decimal Inch): 3.5433; Overall Height
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 16 mm Stroke, M20 x 1.5 Thread 110 mm OAL, 18.1 lb Force
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 16 mm Stroke, M20 x 1.5 Thread 110 mm OAL, 18.1 lb Force
• Indexable Cut-Off Blade Tool Blocks; Tool Block Style: EVTMZN; Blade Height (mm): 26.0000; Blade Height (Decimal Inch): 1.0236; Manufacturers Catalog Number: EVTMZN1626C; Overall Length (mm): 86.0000; Overall Length (Decimal Inch): 3.3858; Overall Height
• Ball Grip Quick-Release Pin: Button Handle, 5/8″ Pin Dia, 2-1/2″ Usable Length 4″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (mm): 80.00; Maximum Cutting Diameter (mm): 95.00; Maximum Depth of Cut (mm): 6.00; Arbor Hole Diameter (mm): 25.40; Lead Angle: 65; Compatible Insert Size Code: SPKN42ZTR; Cutter Style: TGP;
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 16 mm Stroke, M20 x 1.5 Thread 110 mm OAL, 18.1 lb Force
• Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (mm): 80.00; Maximum Cutting Diameter (mm): 89.00; Maximum Depth of Cut (mm): 7.00; Arbor Hole Diameter (mm): 25.40; Lead Angle: 75; Compatible Insert Size Code: SPKN42STR; Cutter Style: TGP;
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 16.00; Drill Diameter (Decimal Inch): 0.6300; Maximum Drill Diameter (Decimal Inch): 0.6300; Drill Diameter (mm): 16.00; Maximum Drill Depth (Decimal Inch): 1.4200; Maximum Drill Dep
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 16.00; Drill Diameter (Decimal Inch): 0.6299; Maximum Drill Diameter (Decimal Inch): 0.6299; Drill Diameter (mm): 16.00; Maximum Drill Depth (Decimal Inch): 1.4173; Maximum Drill Dep
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 16.00; Drill Diameter (Decimal Inch): 0.6299; Maximum Drill Diameter (Decimal Inch): 0.6299; Drill Diameter (mm): 16.00; Maximum Drill Depth (Decimal Inch): 1.4173; Maximum Drill Dep
• Collet Chuck: 1 to 13 mm Capacity, ER Collet, Straight Shank 140 mm Projection, 0.003 mm TIR, Through Coolant
• Replaceable Drill Tips; Diameter (mm): 16.00; Tip Material: Solid Carbide; Manufacturer Grade: Carbide; Series: HT 800 WP; Insert Seat Size: 16; Height (mm): 10.80; Insert Holding Method: Screw; Coolant Through: No; Point Type: Faceted; Applications: Cons
• Ball Grip Quick-Release Pin: Button Handle, 1″ Pin Dia, 2″ Usable Length 4.14″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Die Drill Bit: 0.4527″ Dia, 135 °, Solid Carbide Coated, Series 200
• Office Desks; Type: Desk Shell; Center Draw: No; Color: Cherry; Material: Laminate Over Wood; Width (Inch): 72 in; 72; Overall Width: 72 in; Depth (Inch): 29-7/8; Center Drawer: No; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consum
• 10mm Head Diam PMX5 Modular Reamer Head Uncoated, Straight Flute, h7 Hole Tolerance, Right Hand Cut
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 16.00; Drill Diameter (Decimal Inch): 0.6300; Maximum Drill Diameter (Decimal Inch): 0.6300; Drill Diameter (mm): 16.00; Maximum Drill Depth (Decimal Inch): 1.4200; Maximum Drill Dep
• Collet Chuck: 1 to 13 mm Capacity, ER Collet, Straight Shank 100 mm Projection, 0.003 mm TIR, Through Coolant
• Collet Chuck: 0.5 to 7 mm Capacity, ER Collet, Taper Shank 48 mm Projection, 0.003 mm TIR, Balanced to 40,000 RPM
• Replaceable Tip Drill: 0.512 to 0.528'' Drill Dia, 0.883″ Max Depth, 0.625'' Flatted Shank Uses H3P Inserts, 3.72″ OAL, Through Coolant
• Indexable Boring Bar: E10XSCLCR3A, 19.56 mm Min Bore, N/A Steel & Solid Carbide 8.7000″ OAL, Screw, Uses CCGT325 ™, CCMT325 ™, CCET325 ™, CCGW325 ™ & CCMW325 ™ Inserts
• Collet Tool Holders; Collet Series: ER32; Overall Length: 3.15; Material: Steel
• DRO Mounting Arm Assembly Use with DRO Display
• Modular Grooving Head: Left Hand, Cutting Head, System Size C4, Uses LC.. Size 2802 Inserts 1.024″ Max Depth of Cut, Through Coolant, Series C4-CFZL-22075-2802JETI
• Replaceable Tip Drill: 13.5 to 13.9 mm Drill Dia, 23.16 mm Max Depth, 16 mm Flatted Shank Uses H3P Inserts, 96.08 mm OAL, Through Coolant
• Silicone Tube: 9/16″ OD, 25' Length 140 Max psi, Clear
• Modular Grooving Head: Neutral, Cutting Head, System Size C4, Uses LC.. Size 1603 Inserts 1.339″ Max Depth of Cut, Through Coolant, Series C4-CFXN-00090-03RBJETI
• Replaceable Tip Drill: 14 to 14.4 mm Drill Dia, 24.1 mm Max Depth, 16 mm Flatted Shank Uses H3P Inserts, 98.08 mm OAL, Through Coolant
• End Mill Holder: CAT40 Dual Contact Taper Shank, 3/4″ Hole 6″ Projection, 1-3/4″ Nose Dia
• Modular Grooving Head: Right Hand, Cutting Head, System Size C4, Uses LC.. Size 2802 Inserts 1.024″ Max Depth of Cut, Through Coolant, Series C4-CFZR-22075-2802JETI
• Replaceable Tip Drill: 13 to 13.4 mm Drill Dia, 22.41 mm Max Depth, 16 mm Flatted Shank Uses H3P Inserts, 94.58 mm OAL, Through Coolant
• End Mill Holder: CAT40 Dual Contact Taper Shank, 3/8″ Hole 6″ Projection, 1″ Nose Dia
• Modular Grooving Head: Right Hand, Cutting Head, System Size C4, Uses LC.. Size 2802 Inserts 1.024″ Max Depth of Cut, Through Coolant, Series C4-CFZR-22075-2802RBJETI
• Replaceable Tip Drill: 12.5 to 12.9 mm Drill Dia, 21.46 mm Max Depth, 16 mm Flatted Shank Uses H3P Inserts, 92.42 mm OAL, Through Coolant
• Micro Drill Bit: 0.0709″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Modular Grooving Head: Left Hand, Cutting Head, System Size C4, Uses LC.. Size 2802 Inserts 1.024″ Max Depth of Cut, Through Coolant, Series C4-CFZL-22075-2802RBJETI
• Micro Drill Bit: 0.0669″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Replaceable Tip Drill: 0.551 to 0.567'' Drill Dia, 0.95″ Max Depth, 0.625'' Flatted Shank Uses H3P Inserts, 3.86″ OAL, Through Coolant
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 24; Cutting Width (Decimal Inch): 24; Cutting Width (Inch): 24
• Micro Drill Bit: 0.063″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Modular Grooving Head: Neutral, Cutting Head, System Size C4, Uses LC.. Size 2802 Inserts 1.102″ Max Depth of Cut, Through Coolant, Series C4-CFZN-00075-2802RBJETI
• Replaceable Tip Drill: 0.492 to 0.508'' Drill Dia, 0.846″ Max Depth, 0.625'' Flatted Shank Uses H3P Inserts, 3.64″ OAL, Through Coolant
• Micro Drill Bit: 0.0591″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9949; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Replaceable Tip Drill: 0.532 to 0.547'' Drill Dia, 0.912″ Max Depth, 0.625'' Flatted Shank Uses H3P Inserts, 3.78″ OAL, Through Coolant
• Micro Drill Bit: 0.0551″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Micro Drill Bit: 0.0512″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Micro Drill Bit: 0.0433″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Micro Drill Bit: 0.0472″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Indexable Square-Shoulder End Mill: MEAS32S32132T200, 1.2598'' Cut Dia, Cylindrical Shank Uses 2, Through Coolant, 200.00 mm OAL
• Micro Drill Bit: 0.0394″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• 7/8″ Diam x 1/4″ Thick, Hard Mounted Polishing Wheel 0 Ply, Coarse Grade, 3/32″ Shank Diam 100 pk
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: APBT; Rake: Positive; Rake Angle: 0; Multi-use Tool: No; Lead Angle: 30.0; Insert Holding Method: Anchor Pin; Shank Width (Decimal Inch): 0.6250; Shank Width (Inch): 5/8; Insert
• Micro Drill Bit: 0.0748″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Micro Drill Bit: 0.0728″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Indexable Grooving Toolholder: SIGCL1016EH, Internal Left Hand, Through Coolant
• Micro Drill Bit: 0.078″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.0079″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Replaceable Tip Drill: 25 to 25.5 mm Drill Dia, 78 mm Max Depth, 32 mm Straight-Cylindrical Shank Seat Size 25, 174 mm OAL, Through Coolant
• EDF-3 Carpet Care
• ER: HP16, 0.157″
• 5mm Minor 8mm Major 16.5mm Step Length 140° High Performance Solid Carbide Subland Step Drill Bit AlTiN & TiSiAlCrN Finish, 41mm Flute Length, 79mm OAL, Series DC260-03
• Bridge/Construction Reamers; Reamer Type: Car Reamer; Reamer Diameter (Inch): 1-1/16; Shank Type: Hex Shank; Flute Type: Spiral; Flute Length (Inch): 5; 5 in; Overall Length: 7 in; Small End Diameter: 1.06 in; Tool Material: High Speed Steel; Overall Leng