Products

• Work & General Purpose Gloves
• Gasket Tapes; Thickness (Decimal Inch): 0.0790; Width (Inch): 1; Color: White; Material: Compressible ePTFE; Length (Feet): 5; Material Grade: Standard; PSC Code: 5330; Maximum Temperature (F): 500; Minimum Temperature (F): -450; Material: Compressible eP
• Welding Gloves: Leather, Synthetic Leather & Kevlar
• Work & General Purpose Gloves
• Welding Gloves: Leather, Synthetic Leather & Kevlar
• Work & General Purpose Gloves
• Welding Gloves: Leather, Synthetic Leather & Kevlar
• PAPR Cartridges & Filters; Type: HE Filter; Product Type: Filter; Protection Type: Particulates; Filter Type: HEPA; Color Code: White; For Use With: RPB PX5 PAPR; Number Of Pieces: 1.000
• Bathroom Tissue: Standard Roll, Recycled Fiber, 2-Ply, White 4″ Sheet Length, 3.7″ Sheet Width, 500 Sheets
• Sign Posts & Traffic Sign Accessories; Type: Sand Fillable Base; Sign Post/Stand Height (Feet): 2; Sign Height Compatibility (Inch): 24; Sign Width Compatibility (Inch): 24; Material: Plastic; For Use With: Roll-A-Post ™ 24 in W x 24 in H or Smaller Porta
• Welded Bandsaw Blade: 15' 1″ Long, 1-1/4″ Wide, 0.042″ Thick, 1.3 TPI Carbon Steel, Toothed Edge
• Taper Length Drill Bit: 0.3701″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1-1/2″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Wheel Brush: 2″ Wheel Dia, Crimped Stainless Steel, 60 Grit, 12,000 RPM
• Clean Room Matting; Surface Material: LDPE; Length (Inch): 30; Width (Inch): 24; Thickness (Inch): 1/8; Layers per Mat: 1; Color: White; Series: Clean Stride; PSC Code: 7220
• Abrasive Belt: 1/8" Wide, 24" OAL, 60 Grit, Zirconia Alumina
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.10; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: ICM; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.98; Prima
• Black 90 ° Elbow: 4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• ICM 0232 Carbide Replaceable Tip Drill TiAIN Finish, 140° Included Angle, 5.9mm Diam, 3.85mm High, Through Coolant, Series SumoCham
• ICM 0197 Carbide Replaceable Tip Drill TiAIN Finish, 140° Included Angle, 5mm Diam, 3.7mm High, Through Coolant, Series SumoCham
• All-Purpose Cleaner: 5 gal Pail Liquid, Low Odor Scent
• Indexable Drill Insert: TPA14, IN2505, Carbide Coated
• Abrasive Belt: 1/8" Wide, 20-1/2" OAL, 120 Grit, Zirconia Alumina
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.20; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: ICM; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.96; Prima
• Push Brooms
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.40; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: ICM; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.93; Prima
• Compression Packing; Material: PTFE; Size: 1/4; Spool Length: 50; Color: White; Maximum Working Pressure (psi): 1000; 1000.0 psi; PSC Code: 5330; Color: White; Material: PTFE; Maximum Working Pressure: 1000.0 psi; Material: PTFE
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Plastic Bar: Acetal, 1-1/2″ Thick, White
• Cut & Puncture-Resistant Gloves: 3X-Large, ANSI Cut A3, ANSI Puncture 4 High-Visibility Yellow, Red & Black
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.80; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: ICM; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.89; Pri
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.30; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: ICM; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.95; Prima
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.70; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: ICM; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.91; Pri
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.60; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: ICM; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.93; Pri
• Paper Towels: Continuous Roll, 6 Rolls, Roll, 2 Ply, Recycled Fiber, White 11″ Wide, 58' Roll Length, 140 Sheets
• Hex Head Cap Screw: 5/16-18 x 1-1/4″, Grade L9 Steel, Zinc Yellow Dichromate Finish Fully Threaded
• ER: ER25, 17 mm 34mm OAL, 26mm Overall Diam, 0.0002″ TIR
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Thread Forming Tap: DIN 2174, 6GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Hex Head Cap Screw: 1/4-20 x 2″, Grade L9 Steel, Zinc Yellow Dichromate Finish Partially Threaded
• Full Face Respirator: Large
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Thread Forming Tap: 5/16-24, DIN 2184-1, 2BX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Black Tee: 1-1/2 x 1-1/4 x 1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Clamps For Indexables; Clamp Type: Clamp Assembly; Industry Standard Number: PMX12-CLKI; Toolholder Style Compatibility: PMX12; Cutting Direction: Neutral; Series: PMX12
• Clamps For Indexables; Clamp Type: Clamp Assembly; Industry Standard Number: PMX05-CLKI; Toolholder Style Compatibility: PMX05; Cutting Direction: Neutral; Series: PMX05
• Inventory Control Label: ″Use First″, Circle Paper
• Abrasive Belt: 1/8" Wide, 20-1/2" OAL, 80 Grit, Zirconia Alumina
• Clamps For Indexables; Clamp Type: Clamp Assembly; Industry Standard Number: PMX06-CLKI; Toolholder Style Compatibility: PMX06; Cutting Direction: Neutral; Series: PMX06
• Inspection & Quality Label: ″Return to Stock″, Circle Paper
• Abrasive Belt: 1/8" Wide, 20-1/2" OAL, 60 Grit, Zirconia Alumina
• Clamps For Indexables; Clamp Type: Clamp Assembly; Industry Standard Number: PMX16-CLKI; Toolholder Style Compatibility: PMX16; Cutting Direction: Neutral; Series: PMX16
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Sheet: EPDM Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Inventory Control Label: ″Return to Stock″, Circle Paper
• Plastic Sheet: Polytetrafluoroethylene, 1/32″ Thick, White, 3,500 psi Tensile Strength Shore D-55
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White, 4,250 psi Tensile Strength Shore D-70
• Inventory Control Label: ″Rejected″, Circle Paper
• Plastic Sheet: Garolite, 1/16″ Thick, Black, 16,000 psi Tensile Strength Rockwell M-100
• Collet Tool Holders; Collet Series: ER11; Overall Length: 0.87; Material: Steel
• Welded Bandsaw Blade: 25' 4″ Long, 3/4″ Wide, 0.035″ Thick, 10 to 14 TPI Bi-Metal, Toothed Edge
• Extension Tap: 10-32, 3 Flutes, TiCN Finish, Cobalt, Long Reach 4-5 P, 5.51″ OAL, 0.591″ Thread Length, 2B & 3B Class of Fit
• Turning Insert: QDNL-0800-0008-TF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0315″ Corner Radius, N/A Series CoroCut QD
• Plastic Sheet: Garolite, 1/16″ Thick, Black, 16,000 psi Tensile Strength Rockwell M-100
• Extension Tap: 10-24, 3 Flutes, TiCN Finish, Cobalt, Long Reach 4-5 P, 5.51″ OAL, 0.591″ Thread Length, 2B & 3B Class of Fit
• Grooving Insert: QD-NLGM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.315″ Cutting Width, Series CoroCut QD
• Black Plug: 4″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/2″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Single Profile Thread Mill: 1/4-18 to 1/4-56, 18 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, Bright/Uncoated
• Milling Insert: CNHT 1205 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Abrasive Belt: 1/8" Wide, 20-1/2" OAL, 60 Grit, Zirconia Alumina
• Single Profile Thread Mill: 1/4-18 to 1/4-56, 18 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, Bright/Uncoated
• Grooving Insert: GDFM4020CM PR1215, Solid Carbide Megacoat, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series KGD
• Single Profile Thread Mill: 5/16-14 to 5/16-48, 14 to 48 TPI, Internal & External, 4 Flutes, Solid Carbide 1/4″ Shank Dia, 2.5″ OAL, Bright/Uncoated
• Grooving Insert: GDFM4020CM PR1225, Solid Carbide Megacoat, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series KGD
• Single Profile Thread Mill: M5 x 0.80, Internal & External, 5 Flutes, Solid Carbide 4″ Cut Dia, 4″ Shank Dia, 1.9685″ OAL, AlTiN Nano Coated
• Washroom Partition Hardware & Accessories; Type: Grab Bar; Material: Metal; Depth (Inch): 3-7/16; Color: Chrome
• Indexable Threading Toolholder: External, Left Hand, 11 x 11 mm Shank Steel, Series KTTX
• Single Profile Thread Mill: M4 x 0.70, Internal & External, 4 Flutes, Solid Carbide 3″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Diameter (Decimal Inch): 0.5512; Shank Diameter (mm): 14.00; Inser
• Black Reducing Coupling: 3 x 1-1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Welded Bandsaw Blade: 13' 11″ Long, 1/2″ Wide, 0.025″ Thick, 32 TPI Carbon Steel, Toothed Edge
• Compression Spring: 2.468″ OD, 6″ Free Length 0.192″ Wire Dia, 73.118 lb Max Load, 23.283 lb/in Spring Rate, Stainless Steel
• Flashlights; Bulb Type: LED; Type: Spot Light; Maximum Light Output (Lumens): 1100; Body Type: Plastic; Battery Size: 3.7V; Body Color: Black; Rechargeable: Yes; Complete Light Output (Lumens): 90 (Low); 1100 (High); 1000 (Medium)
• Hex Head Cap Screw: 7/8-14 x 9″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Indexable Threading Toolholder: Internal, Right Hand, 23 x 23 mm Shank Steel, 1.1811″ Min Bore, Series LDT
• Welded Bandsaw Blade: 13' 7″ Long, 3/8″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Compression Spring: 1.351″ OD, 6.5″ Free Length 0.177″ Wire Dia, 104.178 lb Max Load, 45.463 lb/in Spring Rate, Stainless Steel
• Thread Repair Kit: Thread Repair Kit Stainless Steel Insert
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Diameter (Inch)
• Compression Spring: 2.291″ OD, 7.5″ Free Length 0.177″ Wire Dia, 63.322 lb Max Load, 15.568 lb/in Spring Rate, Stainless Steel
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Diameter (Decimal Inch): 0.5512; Shank Diameter (mm): 14.00; Inser
• Compression Spring: 2.585″ OD, 4.75″ Free Length 0.207″ Wire Dia, 85.282 lb Max Load, 36.198 lb/in Spring Rate, Stainless Steel
• Indexable Grooving Toolholder: GFVR2525M1501C, External Right Hand, No
• Compression Spring: 1.586″ OD, 3″ Free Length 0.207″ Wire Dia, 135.087 lb Max Load, 144.556 lb/in Spring Rate, Stainless Steel
• Black Cotton Polyester Elastane General Purpose Pants Zipper Closure, 38″ Waist, 32″ Inseam
• Portable Lockout Kits; Type: Electrical Lockout Kit; Container Type: Pouch; Number of Padlocks Included: 0; Key Type: Keyed Alike
• Indexable Grooving Toolholder: GX-1212RIU, 0.1770″ Max Groove Width 0.2360″ Max Depth, Uses 63 Inserts, 0.7500″ Shank Height, 3/4″ Shank Width, No
• Compression Spring: 2.703″ OD, 9″ Free Length 192.735 lb Max Load, 39.013 lb/in Spring Rate, Music Wire
• Navy Cotton Polyester Elastane General Purpose Pants Zipper Closure, 30″ Waist, 32″ Inseam
• Navy Cotton Polyester Elastane General Purpose Pants Zipper Closure, 40″ Waist, 32″ Inseam
• Combination Drill & Tap Sets; Minimum Thread Size (Inch): M4x0.70 mm; Minimum Thread Size (mm): M4x0.70 mm; Minimum Thread Size: M4x0.70 mm; Maximum Thread Size (mm): M10x1.50 mm; Maximum Thread Size: M10x1.50 mm; Overall Length (Inch): 2.8300 in; Drill L
• Combination Drill & Tap Sets; Minimum Thread Size (Inch): #8-32; #8-32 in; Minimum Thread Size (mm): #8-32 in; Minimum Thread Size: #8-32 in; Maximum Thread Size (mm): 1/4-20 in; Maximum Thread Size (Inch): 1/4-20; Maximum Thread Size: 1/4-20 in; Overall
• Taper Length Drill Bit: 0.4173″ Dia, 142 ° ALtima Plus Finish, RH Cut, Helical Flute, Straight Shank
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 70 mm Usable Length 125.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Taper Length Drill Bit: 0.4213″ Dia, 142 ° ALtima Plus Finish, RH Cut, Helical Flute, Straight Shank
• Taper Length Drill Bit: 0.4219″ Dia, 142 ° ALtima Plus Finish, RH Cut, Helical Flute, Straight Shank
• Plastic Rod: Garolite (G-10 & FR4), 2' Long, 1-1/8″ Dia, Yellow Rockwell M-110
• Combination Drill & Reamers; Reamer Size (Inch): 1/8; Reamer Size (Fractional Inch): 1/8; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.1250; Series: UDM5A1AA; Tool Performance: High Per
• Metal Push-To-Connect Tube Fittings; Fitting Type: 45 ™ EL; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/4″; Tube Outside Diameter: 3/4; Fitting Shape: 45 ™ Elbow; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards
• Hex Head Cap Screw: 7/8-9 x 8″, Grade 5 Steel, Zinc-Plated Partially Threaded, ASME B18.2.1 & SAE J429
• Welded Bandsaw Blade: 10' Long, 3/4″ Wide, 0.032″ Thick, 14 TPI Carbon Steel, Toothed Edge
• Compression Spring: 1.175″ OD, 2.875″ Free Length 0.207″ Wire Dia, 176.487 lb Max Load, 315.102 lb/in Spring Rate, Stainless Steel
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Swivel Top Plate Caster: Elastic Rubber, 3-15/16″ Wheel Dia, 1-3/8″ Wheel Width, 132 lb Capacity, 5-1/16″ OAH 3.125″ Plate Length, 4.13″ Plate Width, No Brake
• Sheet: Buna-N Rubber, 24″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Compression Spring: 1.175″ OD, 5.75″ Free Length 0.148″ Wire Dia, 74.095 lb Max Load, 33.543 lb/in Spring Rate, Stainless Steel
• Closed Cell Neoprene Foam: 36″ Wide, Black Plain Backing
• 18″ Plastic Snow Scoop 36″ D-Grip Steel Handle
• Grooving Insert: GDM3015CM PR1215, Solid Carbide Megacoat, Neutral, 3 mm Cutting Width, 8 mm Max Depth, Series KGD
• Dust Mop Heads & Pads; Type: Dust Mop Head; Mop Head Material: Cotton; Color: White; Launderable: Yes; Antimicrobial: No; Connection Type: Tie-on; For Frame Width: 5; Head Style: Fringed; Color: White; Color: White; Head Material: Cotton; Dust Mop Type: D
• Grooving Insert: GDM3015CM PR1535, Solid Carbide Megacoat Nano Finish, Neutral, 3 mm Cutting Width, 8 mm Max Depth, Series KGD
• Welded Bandsaw Blade: 12' 10″ Long, 1/2″ Wide, 0.025″ Thick, 3 TPI Carbon Steel, Toothed Edge
• Compression Spring: 0.705″ OD, 8.5″ Free Length 0.125″ Wire Dia, 75.178 lb Max Load, 35.906 lb/in Spring Rate, Stainless Steel
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 16.2 mm OD, 10 mm Stroke, M12 x 1 Thread 76 mm OAL, 9.8 lb Force
• Abrasive Belt: 1/8" Wide, 18" OAL, 120 Grit, Zirconia Alumina
• Abrasive Belt: 1/8" Wide, 18" OAL, 60 Grit, Zirconia Alumina
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 16.2 mm OD, 10 mm Stroke, M12 x 1 Thread 76 mm OAL, 9.8 lb Force
• Gloves: Size S, Fleece-Lined, Synthetic Suede Black
• 100' Long All Weather & Contractor Hose 5/8 3/4 650 Yes Black
• Compression Spring: 1.528″ OD, 2.5″ Free Length 0.225″ Wire Dia, 173.203 lb Max Load, 281.082 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GDFM3020CM PR1215, Solid Carbide Megacoat, Neutral, 3 mm Cutting Width, 25 mm Max Depth, Series KGD
• Compression Spring: 1.586″ OD, 7″ Free Length 315.419 lb Max Load, 147.657 lb/in Spring Rate, Music Wire
• Micro Drill Bit: 0.0067″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Abrasive Belt: 1/8" Wide, 18" OAL, 60 Grit, Zirconia Alumina
• Micro Drill Bit: 0.0071″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Compression Spring: 1.41″ OD, 2.125″ Free Length 242.777 lb Max Load, 701.275 lb/in Spring Rate, Stainless Steel
• ZepCorex Liquid, Mildly Acidic, Cleaner
• Boring Head Parts & Tools; Type: Securing Washer; Hex Size (mm): 5.000
• Compression Spring: 2.761″ OD, 9″ Free Length 188.88 lb Max Load, 37.682 lb/in Spring Rate, Music Wire
• Micro Drill Bit: 0.0059″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0063″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Compression Spring: 1.88″ OD, 6.75″ Free Length 270.619 lb Max Load, 102.804 lb/in Spring Rate, Music Wire
• Bar Puller Parts & Accessories; Accessory Type: Gripper; Accessory Type: Gripper; Jaw Type: Self Activating/Slotted Jaw Set; Compatible Bar Puller: Bar Puller Kits; Compatible Bar Puller: Bar Puller Kits; Gripper Size: 0.125 in; Adapter Size: 1; Shank Dia
• Tapcon next generation technology with star drive increases productivity by maintaining drive engagement during installation. Star drive eliminates bit slip for 3/16″ Star Flat Head Tapcon. Tapcon Concrete Anchors Blue Climaseal
• Compression Spring: 1.4″ OD, 5″ Free Length 0.177″ Wire Dia, 100.823 lb Max Load, 57.477 lb/in Spring Rate, Stainless Steel
• Replaceable Tip Drill: 4.5 to 4.9 mm Drill Dia, 23.16 mm Max Depth, 6 mm Straight-Cylindrical Shank Uses ICP Inserts, 68.65 mm OAL, Through Coolant
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Hex Head Cap Screw: 1/2-20 x 2-3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Turning Insert: RCMT64MOSNSM CTCP125P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3937″ Corner Radius, 0.0 &deg N/A Round, Series RCMT
• Replaceable Tip Drill: 6 to 6.4 mm Drill Dia, 30.96 mm Max Depth, 8 mm Straight-Cylindrical Shank Uses ICP Inserts, 76 mm OAL, Through Coolant
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Die Drill Bit: 0.2756″ Dia, 140 °, Solid Carbide Bright Finish, 1-1/2″ Flute, 2-11/16″ OAL, Series 470
• Compression Spring: 2.056″ OD, 6″ Free Length 0.162″ Wire Dia, 55.529 lb Max Load, 17.096 lb/in Spring Rate, Stainless Steel
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• End Mill Holder: CAT40 Dual Contact Shank, 3/16″ Hole 3″ Projection, 0.69″ Nose Dia, Through Coolant
• Hard Hat: Electrical Protection, Heat Protection & High Visibility, Full Brim, Class E & G, 4-Point Suspension Orange, Polyethylene
• All-Purpose Cleaner: 144 gal Bottle, Disinfectant Liquid, Sparkling Lemon & Sunflower Essence Scent
• Compression Spring: 1.586″ OD, 5.5″ Free Length 0.162″ Wire Dia, 71.102 lb Max Load, 28.259 lb/in Spring Rate, Stainless Steel
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Indexable Grooving Toolholder: TTEL25.4-3-TB, 0.0950″ Max Groove Width 0.4720″ Max Depth, Uses TD 3 & TS 3 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• 5/16″ Screw 1-1/8″ OAL 0.315″ ID x 3/4″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Masking Tape: 30 mm Wide, 55 m Long, 6.3 mil Thick, Tan Crepe Paper, Rubber Adhesive, 27 lb/in Tensile Strength
• Grooving Insert: FMM6004 CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 6 mm Cutting Width, 32 mm Max Depth, Series KFMS
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 15 mm Usable Length 70.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Indexable Grooving Toolholder: TTER25.4-3-TB, 0.0950″ Max Groove Width 0.4720″ Max Depth, Uses TD 3 & TS 3 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Hex Head Cap Screw: 3/4-10 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2160; Maximum Bore Depth (Decimal Inch): 0.8000; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 10 mm Usable Length 65.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Indexable Grooving Toolholder: TTER25.4-4-TB, 0.1180″ Max Groove Width 0.5900″ Max Depth, Uses TD 4 & TS 4 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2160; Maximum Bore Depth (Decimal Inch): 0.4000; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch
• Compression Spring: 1.41″ OD, 6.75″ Free Length 0.148″ Wire Dia, 62.518 lb Max Load, 20.047 lb/in Spring Rate, Stainless Steel
• Hex Head Cap Screw: 3/4-10 x 10″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 12 mm Stroke, M14 x 1.5 Thread 78 mm OAL, 8.9 lb Force
• Indexable Grooving Toolholder: TTER25.4-6-TB, 0.1970″ Max Groove Width 0.7870″ Max Depth, Uses TD 6 & TS 6 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1960; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 12 mm Stroke, M14 x 1.5 Thread 78 mm OAL, 8.9 lb Force
• PVC Tube: 1/2″ ID, 3/4″ OD, 25' Long 100 Max psi, Clear
• Extra Length Drill Bit: 0.1969″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 3.937″ Flute Length, 5.197″ OAL, Straight-Cylindrical Shank, Series DC160-16-A1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 12 mm Stroke, M14 x 1.5 Thread 78 mm OAL, 8.9 lb Force
• Compression Spring: 1.586″ OD, 8.5″ Free Length 0.148″ Wire Dia, 55.936 lb Max Load, 13.17 lb/in Spring Rate, Stainless Steel
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 90 mm Usable Length 145.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Indexable Grooving Toolholder: TTER25.4-5-TB, 0.1570″ Max Groove Width 0.7870″ Max Depth, Uses TD 5 & TS 5 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Compression Spring: 2.174″ OD, 6.75″ Free Length 236.629 lb Max Load, 76.078 lb/in Spring Rate, Music Wire
• Lathe Clamping Unit & Turret Accessories; Type: Blanking Plug; For Use With: Doosan PUMA 480 (M,LM,XLM) (BMT75); MTRent T36FMC; SMART NL 4000 M (LM); Doosan PUMA V8300M (BMT75); Victor Vturn-40 (CM/YCM) (BMT75); KOVOSVIT MAS SP 430 MC L2 2500 (BMT75); Hyu
• Milling Tip Inserts; Milling Tip Type: Profile Mill; Milling Tip Style: XHT; Maximum Depth of Cut (mm): 12.94; Cutting Diameter (mm): 16.00; Tool Material: Carbide; Depth of Cut (mm): 12.94; Manufacturer Grade: SIRA; Chipbreaker: None; Series: XHT740; Coa
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Compression Spring: 2.291″ OD, 6.75″ Free Length 225.314 lb Max Load, 68.83 lb/in Spring Rate, Music Wire
• Boring Cartridges
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• ER: ER16, 0.25″ 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Plastic Bar: Polytetrafluoroethylene, 3/32″ Thick, White
• Half Facepiece Respirator: Silicone & Nylon, Threaded, Large -
• ER: ER16, 0.2188″ 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Replaceable Tip Drill: 4 to 4.4 mm Drill Dia, 20.62 mm Max Depth, 6 mm Straight-Cylindrical Shank Uses ICP Inserts, 65.7 mm OAL, Through Coolant
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Half Facepiece Respirator: Silicone & Nylon, Medium -
• Soft Lathe Chuck Jaw: Serrated 1-1/4″ OAW, 3″ OAH, 3″ OAL, 0.719″ Between Mount Holes, 0.3125″ Fastener, Aluminum
• Replaceable Tip Drill: 8 to 8.4 mm Drill Dia, 41.2 mm Max Depth, 10 mm Straight-Cylindrical Shank Uses ICP Inserts, 91.4 mm OAL, Through Coolant
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Pipe Fitting: 1-1/2 x 1-1/2″ Fitting, 316 Stainless Steel 150 psi
• Replaceable Tip Drill: 7 to 7.4 mm Drill Dia, 36.01 mm Max Depth, 8 mm Straight-Cylindrical Shank Uses ICP Inserts, 81.6 mm OAL, Through Coolant
• Black Reducing Coupling: 1/2 x 3/8″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Grooving Tool: Retaining Ring Solid Carbide, 1/4″ Shank Dia, 0.02″ Groove Width
• Replaceable Tip Drill: 6.5 to 6.9 mm Drill Dia, 33.68 mm Max Depth, 8 mm Straight-Cylindrical Shank Uses ICP Inserts, 78.8 mm OAL, Through Coolant
• Replaceable Tip Drill: 8.5 to 8.9 mm Drill Dia, 43.79 mm Max Depth, 10 mm Straight-Cylindrical Shank Uses ICP Inserts, 93.9 mm OAL, Through Coolant
• Indexable Grooving Toolholder: TTEL25.4-6-TB, 0.1970″ Max Groove Width 0.7870″ Max Depth, Uses TD 6 & TS 6 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Extra Length Drill Bit: 0.25″ Dia, 130 °, High Speed Steel Uncoated, 9.252″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• Grooving Insert: TDXUXU-Universal CT3000, Cermet Uncoated, Neutral, 0.197″ Cutting Width, Series TDXU-E
• Indexable Grooving Toolholder: TTEL25.4-5-TB, 0.1570″ Max Groove Width 0.7870″ Max Depth, Uses TD 5 & TS 5 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Extra Length Drill Bit: 0.2244″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 503
• Extra Length Drill Bit: 0.2953″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 503
• Grooving Insert: TDXUXU-Universal CT3000, Cermet Uncoated, Neutral, 0.197″ Cutting Width, Series TDXU-E
• All-Purpose Cleaner: 1 gal Bottle Liquid, Fresh Scent
• Indexable Grooving Toolholder: TTEL25.4-4-TB, 0.1180″ Max Groove Width 0.5900″ Max Depth, Uses TD 4 & TS 4 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Compression Spring: 1.469″ OD, 2.5″ Free Length 0.225″ Wire Dia, 179.415 lb Max Load, 309.166 lb/in Spring Rate, Stainless Steel
• Replaceable Tip Drill: 9 to 9.4 mm Drill Dia, 46.35 mm Max Depth, 10 mm Straight-Cylindrical Shank Uses ICP Inserts, 96.8 mm OAL, Through Coolant
• Compression Spring: 1.41″ OD, 4.25″ Free Length 0.177″ Wire Dia, 100.164 lb Max Load, 65.57 lb/in Spring Rate, Stainless Steel
• Extra Length Drill Bit: 0.189″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 3.937″ Flute Length, 5.197″ OAL, Straight-Cylindrical Shank, Series DC160-16-A1
• PAPR Cartridges & Filters; Type: Filter; Product Type: Filter; Protection Type: Particulates; Filter Type: HEPA
• 1/4-20, 1″ OAL, 1/2″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 1/2″ Body Length, 1/2″ Thread Length, 1/4″ Thread Depth, Grade 360, Zinc-Plated
• Linear Motion Systems; Type: Linear Guide; Linear Motion Type: Linear Guide; Overall Width (Decimal Inch): 0.8800; Overall Length (mm): 8.7100
• Extra Length Drill Bit: 0.1772″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 3.937″ Flute Length, 5.197″ OAL, Straight-Cylindrical Shank, Series DC160-16-A1
• Single Profile Thread Mill: #8-32 to #8-36, 32 to 36 TPI, Internal & External, 4 Flutes, Solid Carbide 0.12″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Compression Spring: 2.703″ OD, 9.5″ Free Length 0.225″ Wire Dia, 143.723 lb Max Load, 24.703 lb/in Spring Rate, Music Wire
• 3D Printer Consumables
• Replaceable Tip Drill: 9.5 to 9.9 mm Drill Dia, 48.94 mm Max Depth, 10 mm Straight-Cylindrical Shank Uses ICP Inserts, 99.3 mm OAL, Through Coolant
• Compression Spring: 1.998″ OD, 3.5″ Free Length 0.192″ Wire Dia, 89.463 lb Max Load, 58.251 lb/in Spring Rate, Stainless Steel
• Single Profile Thread Mill: 1/4-20 to 1/4-56, 20 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• 3D Printer Consumables
• Extra Length Drill Bit: 0.1875″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 3.937″ Flute Length, 5.197″ OAL, Straight-Cylindrical Shank, Series DC160-16-A1
• Compression Spring: 1.88″ OD, 3.5″ Free Length 0.192″ Wire Dia, 94.764 lb Max Load, 64.643 lb/in Spring Rate, Stainless Steel
• 3D Printer Consumables
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Replaceable Tip Drill: 7.5 to 7.9 mm Drill Dia, 38.6 mm Max Depth, 8 mm Straight-Cylindrical Shank Uses ICP Inserts, 84.1 mm OAL, Through Coolant
• Compression Spring: 1.88″ OD, 5.75″ Free Length 0.162″ Wire Dia, 60.499 lb Max Load, 20.432 lb/in Spring Rate, Stainless Steel
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• 3D Printer Consumables
• Taper Shank Drill Bit: 0.4685″ Dia, 1MT, 118 °, High Speed Steel Oxide Finish, 5.2756″ Flute Length, 8.4646″ OAL, Cone Relief Point, Spiral Flute
• Laundry Detergent; Form: Powder; Container Size (Lb.): 40; Scent: Lemon; Description: Pail
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• 3D Printer Consumables