Colchester Geared Head Lathe - #80274 13'' Swing; 40'' Between Centers; 3HP, 440V Motor

Item #: RF5880274
Manufacturer: Clausing
Mfg #: 80274J-4

Technical Specifications:
•Brand Name: Clausing •Center Taper: 5MT •Cross slide travel: 7-1/2 •Distance Between Centers: 40 •Inch Pitch Threads: (56) 2-56 TPI •Metric Pitch Threads: (39) .2-14mm •Model Number: 8027 •Motor: 3HP, 440V •Spindle Hole Diameter: 1-1/2 •Spindle Speeds: 40-2500 RPM •Spindle Type: D1-4 •Swing: 13 •Swing over crosslide: 8.25 •Swing over gap: 19 •Tailstock Taper: 3MT •Trade Name: Colchester •Weight: 1512 lbs

Description:
•Features: Fully-geared headstock with 12 spindle speeds All head stock gears are hardened and ground Spindle bearings, gears, shafts, and headstock clutches are lubricated by a pumped oil bath A wide range of feeds and thread selections is available by using three selector levers and an 8-position rotary dial Sturdy cast iron bed with hardened and ground bed ways •Spindle bore 1.5 •Longitudinal feeds (16) .001 -.40 No./range metric threads 39/0.2-14mm No./range inch threads 35/2-56 tpi •Top slide travel 3.625 •F.O.B. Kalamazoo, MI •Limited Distribution

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1512.0000

$19,109.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Colchester Geared Head Lathe - #8044VS 15-3/4'' Swing; 50'' Between Centers; 10HP, 3HP, 230V Motor

Item #: RF588044VS2
Manufacturer: Clausing
Mfg #: 8044VSJ-2

Technical Specifications:
•Brand Name: Clausing •Center Taper: 4MT •Cross slide travel: 9.8 •Distance Between Centers: 50 •Inch Pitch Threads: (56) 2-56 TPI •Metric Pitch Threads: (51) .2-14mm •Model Number: 8044VS •Motor: 10HP, 230V, 3PH •Spindle Hole Diameter: 2-1/8 •Spindle Speeds: 14-2500 RPM •Spindle Type: D1-6 •Swing: 15-3/4 •Swing over crosslide: 9.75 •Swing over gap: 23 •Tailstock Taper: 5MT •Trade Name: Colchester •Weight: 3300 lbs

Description:
•Features: Powerful 10 HP AC variable spindle drive motor State-of-the-art AC inverter variable speed spindle drive Three headstock gear ranges offer a wide range of constant power - 33 to 1 Infinitely variable spindle speeds, select the right spindle speed quickly Full rear splash guard and leadscrew cover Leadscrew reversing box for faster thread cutting, reverse leadscrew with spindle turning Extra wide heavy-duty cast iron bed •Spindle bore 2.12 •Top slide travel 5.1 •Tailstock quill travel 5.5 •Tailstock quill diameter 2.87 •F.O.B. Kalamazoo, MI •Limited Distribution Area

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 3300.0000

$35,791.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Colchester Geared Head Lathe - #8044VS 15-3/4'' Swing; 50'' Between Centers; 10HP, 3HP, 460V Motor

Item #: RF588044VS4
Manufacturer: Clausing
Mfg #: 8044VSJ-4

Technical Specifications:
•Brand Name: Clausing •Center Taper: 4MT •Cross slide travel: 9.8 •Distance Between Centers: 50 •Inch Pitch Threads: (56) 2-56 TPI •Metric Pitch Threads: (51) .2-14mm •Model Number: 8044VS •Motor: 10HP, 460V, 3PH •Spindle Hole Diameter: 2-1/8 •Spindle Speeds: 14-2500 RPM •Spindle Type: D1-6 •Swing: 15-3/4 •Swing over crosslide: 9.75 •Swing over gap: 23 •Tailstock Taper: 5MT •Trade Name: Colchester •Weight: 3300 lbs

Description:
•Features: Powerful 10 HP AC variable spindle drive motor State-of-the-art AC inverter variable speed spindle drive Three headstock gear ranges offer a wide range of constant power - 33 to 1 Infinitely variable spindle speeds, select the right spindle speed quickly Full rear splash guard and leadscrew cover Leadscrew reversing box for faster thread cutting, reverse leadscrew with spindle turning Extra wide heavy-duty cast iron bed •Spindle bore 2.12 •Top slide travel 5.1 •Tailstock quill travel 5.5 •Tailstock quill diameter 2.87 •F.O.B. Kalamazoo, MI •Limited Distribution Area

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 3300.0000

$35,791.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Colchester Geared Head Lathe - #8054VS 18.1'' Swing; 60'' Between Centers; 15HP, 220V Motor

Item #: RF588054VS
Manufacturer: Clausing
Mfg #: 8054VSJ

Technical Specifications:
•Brand Name: Clausing •Center Taper: 5MT •Cross slide travel: 11.81 •Distance Between Centers: 60 •Inch Pitch Threads: (73) 2-84 TPI •Metric Pitch Threads: (51) .2-14mm •Model Number: 8054VS •Motor: 15HP, 220V •Spindle Hole Diameter: 3 •Spindle Speeds: 20-2000 RPM •Spindle Type: D1-8 •Swing: 18.1 •Swing over crosslide: 10.62 •Swing over gap: 28.74 •Tailstock Taper: 6MT •Trade Name: Colchester •Weight: 5765 lbs

Description:
•4 years parts and labor warranty •Leadscrew reversing box for faster thread cutting, reverse leadscrew with spindle running Three headstock gear ranges with a wide spread of constant power 33 to 1 Rapid power traverse for power feed and 2 axis rapid traverse available from one lever Very rigid extra wide bed with triangular webs for excellent chip removal Heavy-duty tailstock for excellent rigidity Inch treading dial Large capacity wheeled chip bin for easy chip disposal Full splash guard and chuck guard Coolant system One shot saddle and cross slide lubrication •F.O.B. Kalamazoo, MI •Limited Distribution Area

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 5765.0000

$52,560.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Colchester Geared Head Lathe - #8116VS 21.8'' Swing; 80'' Between Centers; 15HP, 220V Motor

Item #: RF588116VS
Manufacturer: Clausing
Mfg #: 8116VSJ

Technical Specifications:
•Brand Name: Clausing •Center Taper: 5MT •Cross slide travel: 11.81 •Distance Between Centers: 80 •Inch Pitch Threads: (73) 2-84 TPI •Metric Pitch Threads: (51) .2-14mm •Model Number: 8116VS •Motor: 15HP, 220V •Spindle Hole Diameter: 3.54 •Spindle Speeds: 18-1800 RPM •Spindle Type: D1-11 •Swing: 21.8 •Swing over crosslide: 14.57 •Swing over gap: 32.68 •Tailstock Taper: 6MT •Trade Name: Colchester •Weight: 6283 lbs

Description:
•4 years parts and labor warranty •Leadscrew reversing box for faster thread cutting, reverse leadscrew with spindle running Three headstock gear ranges with a wide spread of constant power 33 to 1 Rapid power traverse for power feed and 2 axis rapid traverse available from one lever Very rigid extra wide bed with triangular webs for excellent chip removal Heavy-duty tailstock for excellent rigidity Inch treading dial Large capacity wheeled chip bin for easy chip disposal Full splash guard and chuck guard Coolant system One shot saddle and cross slide lubrication •F.O.B. Kalamazoo, MI •Limited Distribution Area

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 6283.0000

$57,072.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Colchester Variable Speed Lathe - #8016VS - 13'' Swing - 25'' Between Centers - 10 HP, 220V Motor

Item #: RF588016VS
Manufacturer: Clausing
Mfg #: 8016VSJ

Technical Specifications:
•Brand Name: Clausing •Center Taper: 3MT •Cross slide travel: 9.8 •Distance Between Centers: 25 •Inch Pitch Threads: (56) 2-56 TPI •Metric Pitch Threads: (51) .2-14mm •Model Number: 8016VS •Motor: 10HP, 220V •Spindle Hole Diameter: 1.65 •Spindle Speeds: 0-3250 RPM •Spindle Type: D1-4 •Swing: 13 •Swing over crosslide: 7.75 •Swing over gap: 21 •Tailstock Taper: 4MT •Trade Name: Colchester •Weight: 2790 lbs

Description:
•Features: ¢ Powerful 10 HP AC variable spindle drive motor ¢ State-of-the-art AC inverter variable speed spindle drive ¢ Three headstock gear ranges offer a wide range of constant power - 33 to 1 ¢ Infinitely variable spindle speeds, select the right spindle speed quickly ¢ Full rear splash guard and leadscrew cover ¢ Leadscrew reversing box for faster thread cutting, reverse leadscrew with spindle turning ¢ Extra wide heavy-duty cast iron bed •Model 8016VS Swing over bed 13.75" Swing over cross slide 7.75" Distance between centers 25" Spindle bore 1.65" Spindle nose D1-4 Spindle speed Range (RPM) 0-3250 Cross slide travel 9.8" Top slide travel 3.9" Tailstock quill travel 5.7" Tailstock quill diameter 2.87" Weight 2,790 lbs. •F.O.B. Kalamazoo, MI •Limited Distribution Area

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 2790.0000

$33,624.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Colchester Variable Speed Lathe - #8055VS - 18'' Swing - 80'' Between Centers - 15 HP Motor

Item #: RF588055VS
Manufacturer: Clausing
Mfg #: 8055VSJ

Technical Specifications:
•Brand Name: Clausing •Center Taper: 5MT •Cross slide travel: 11.81 •Distance Between Centers: 80 •Inch Pitch Threads: (73) 2-84 TPI •Metric Pitch Threads: (51) .2-14mm •Model Number: 8055VS •Motor: 15HP •Spindle Hole Diameter: 3 •Spindle Speeds: 20-2000 RPM •Spindle Type: D1-8 •Swing: 18 •Swing over crosslide: 10.62 •Swing over gap: 28.74 •Tailstock Taper: 6MT •Trade Name: Colchester •Weight: 5765 lbs

Description:
•4 years parts and labor warranty •Leadscrew reversing box for faster thread cutting, reverse leadscrew with spindle running ¢ Three headstock gear ranges with a wide spread of constant power – 33 to 1 ¢ Rapid power traverse for power feed and 2 axis rapid traverse available from one lever ¢ Very rigid extra wide bed with triangular webs for excellent chip removal ¢ Heavy-duty tailstock for excellent rigidity ¢ Inch treading dial ¢ Large capacity wheeled chip bin for easy chip disposal ¢ Full splash guard and chuck guard ¢ Coolant system ¢ One shot saddle and cross slide lubrication •F.O.B. Kalamazoo, MI •Limited Distribution Area

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 5765.0000

$55,920.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe - #1440EL 14'' Swing; 40'' Between Centers; 3HP; 220V Motor

Item #: RA601440EL
Manufacturer: Acer
Mfg #: 1440EL

Technical Specifications:
•Brand Name: Acer •Center Taper: 3MT •Cross slide travel: 8-5/8 •Distance Between Centers: 40 •Inch Pitch Threads: (32) 3-56 TPI •Metric Pitch Threads: (30) .4-7mm •Model Number: 1440EL •Motor: 3HP, 220V •Spindle Hole Diameter: 1-1/2 •Spindle Speeds: 36-2200 RPM (Infinite) •Spindle Type: D1-4 •Swing: 14 •Swing over crosslide: 8-3/4 •Swing over gap: 20-3/4 •Tailstock Taper: 3MT •Weight: 1520 lbs

Description:
•Accept both single phase and three phase power •Low maintenance and down time cost due to fewer gears in headstock •Constant Surface Speed (optional) •Electronic and mechanical brake for fast spin spindle stops internal threading •No RPM gear changer break down, accurate reading on RPM to prolong tool life •Spindle speed could be adjusted to best condition during cutting •Save energy cost up to 35% •17" Models are also available in 40" and 80" Center Distance •1 Year Warranty Parts •F.O.B. ANAHEIM, CA •Standard Equipment:•1440:6" 3-Jaw chuck, 8" 4-Jaw chuck, steady and follow rest, halogen worklight, toolbox, 4-way tool post, 10" face plate, splash guard and micrometer work stop •1760:10" 3-Jaw chuck, 4-way tool post, steady rest, halogen worklight, chuck guard, splash guard, 14" face plate & 3-Jaw and 4-Jaw adapter plate

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1520.0000 •An additional $250.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$12,185.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe - #1440EL 14'' Swing; 40'' Between Centers; 3HP; 440V Motor

Item #: RA601440EL4
Manufacturer: Acer
Mfg #: 1440EL4

Technical Specifications:
•Brand Name: Acer •Center Taper: 3MT •Cross slide travel: 8-5/8 •Distance Between Centers: 40 •Inch Pitch Threads: (32) 3-56 TPI •Metric Pitch Threads: (30) .4-7mm •Model Number: 1440EL4 •Motor: 3HP, 440V •Spindle Hole Diameter: 1-1/2 •Spindle Speeds: 36-2200 RPM (Infinite) •Spindle Type: D1-4 •Swing: 14 •Swing over crosslide: 8-3/4 •Swing over gap: 20-3/4 •Tailstock Taper: 3MT •Weight: 1520 lbs

Description:
•Accept both single phase and three phase power •Low maintenance and down time cost due to fewer gears in headstock •Constant Surface Speed (optional) •Electronic and mechanical brake for fast spin spindle stops internal threading •No RPM gear changer break down, accurate reading on RPM to prolong tool life •Spindle speed could be adjusted to best condition during cutting •Save energy cost up to 35% •17" Models are also available in 40" and 80" Center Distance •1 Year Warranty Parts •F.O.B. ANAHEIM, CA •Standard Equipment:•1440:6" 3-Jaw chuck, 8" 4-Jaw chuck, steady and follow rest, halogen worklight, toolbox, 4-way tool post, 10" face plate, splash guard and micrometer work stop •1760:10" 3-Jaw chuck, 4-way tool post, steady rest, halogen worklight, chuck guard, splash guard, 14" face plate & 3-Jaw and 4-Jaw adapter plate

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1520.0000 •An additional $250.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$12,695.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe - #1760EL 17'' Swing; 60'' Between Centers; 7.5HP; 220V Motor

Item #: RA601760EL
Manufacturer: Acer
Mfg #: 1760G

Technical Specifications:
•Brand Name: Acer •Center Taper: 4MT •Cross slide travel: 8-5/8 •Distance Between Centers: 60 •Inch Pitch Threads: (36) 4-56 TPI •Metric Pitch Threads: (22) .5-7mm •Model Number: 1760EL •Motor: 7.5HP, 220V •Spindle Hole Diameter: 2-1/4 •Spindle Speeds: 25-2200 RPM (Infinite) •Spindle Type: D1-6 •Swing: 17 •Swing over crosslide: 9-5/8 •Swing over gap: 26 •Tailstock Taper: 4MT •Weight: 3950 lbs

Description:
•Accept both single phase and three phase power •Low maintenance and down time cost due to fewer gears in headstock •Constant Surface Speed (optional) •Electronic and mechanical brake for fast spin spindle stops internal threading •No RPM gear changer break down, accurate reading on RPM to prolong tool life •Spindle speed could be adjusted to best condition during cutting •Save energy cost up to 35% •17" Models are also available in 40" and 80" Center Distance •1 Year Warranty Parts •F.O.B. ANAHEIM, CA •Standard Equipment:•1440:6" 3-Jaw chuck, 8" 4-Jaw chuck, steady and follow rest, halogen worklight, toolbox, 4-way tool post, 10" face plate, splash guard and micrometer work stop •1760:10" 3-Jaw chuck, 4-way tool post, steady rest, halogen worklight, chuck guard, splash guard, 14" face plate & 3-Jaw and 4-Jaw adapter plate

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 3950.0000 •An additional $300.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$22,076.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe - #1760EL 17'' Swing; 60'' Between Centers; 7.5HP; 440V Motor

Item #: RA601760EL4
Manufacturer: Acer
Mfg #: 1760EL4

Technical Specifications:
•Brand Name: Acer •Center Taper: 4MT •Cross slide travel: 8-5/8 •Distance Between Centers: 60 •Inch Pitch Threads: (36) 4-56 TPI •Metric Pitch Threads: (22) .5-7mm •Model Number: 1760EL4 •Motor: 7.5HP, 440V •Spindle Hole Diameter: 2-1/4 •Spindle Speeds: 25-2200 RPM (Infinite) •Spindle Type: D1-6 •Swing: 17 •Swing over crosslide: 9-5/8 •Swing over gap: 26 •Tailstock Taper: 4MT •Weight: 3950 lbs

Description:
•Accept both single phase and three phase power •Low maintenance and down time cost due to fewer gears in headstock •Constant Surface Speed (optional) •Electronic and mechanical brake for fast spin spindle stops internal threading •No RPM gear changer break down, accurate reading on RPM to prolong tool life •Spindle speed could be adjusted to best condition during cutting •Save energy cost up to 35% •17" Models are also available in 40" and 80" Center Distance •1 Year Warranty Parts •F.O.B. ANAHEIM, CA •Standard Equipment:•1440:6" 3-Jaw chuck, 8" 4-Jaw chuck, steady and follow rest, halogen worklight, toolbox, 4-way tool post, 10" face plate, splash guard and micrometer work stop •1760:10" 3-Jaw chuck, 4-way tool post, steady rest, halogen worklight, chuck guard, splash guard, 14" face plate & 3-Jaw and 4-Jaw adapter plate

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 3950.0000 •An additional $300.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$22,688.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe w/ CCS - #1440GEVS2 14'' Swing; 40'' Between Centers; 3HP; 220V Motor

Item #: RA601440GEVS2
Manufacturer: Acer
Mfg #: 1440GEVS2

Technical Specifications:
•Brand Name: Acer •Center Taper: 3MT •Cross slide travel: 8-5/8 •Distance Between Centers: 40 •Inch Pitch Threads: (32) 3-56 TPI •Metric Pitch Threads: (30) .4-7mm •Model Number: 1440GEVS •Motor: 3HP, 220V •Spindle Hole Diameter: 1-1/2 •Spindle Speeds: 36-2200 RPM (Infinite) •Spindle Type: D1-4 •Swing: 14 •Swing over crosslide: 8-3/4 •Swing over gap: 20-3/4 •Tailstock Taper: 3MT •Weight: 1520 lbs

Description:
•Constant Surface Speed - Provides an output that can be applied to an AC inverter spindle drive •The system uses a DRO and the Precision Scale feedback to automatically control spindle RPM with the Highest Accuracy •Advantages of Constant Surface Speed:•Optimum surface cutting speeds improving tool life •Better surface finishes •Includes a Digital Readout as Standard Equipment •1 Year Warranty Parts •F.O.B. ANAHEIM, CA

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 2320.0000 •An additional $250.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$15,244.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe w/ CCS - #1440GEVS4 14'' Swing; 40'' Between Centers; 3HP; 440V Motor

Item #: RA601440GEVS4
Manufacturer: Acer
Mfg #: 1440GEVS4

Technical Specifications:
•Brand Name: Acer •Center Taper: 3MT •Cross slide travel: 8-5/8 •Distance Between Centers: 40 •Inch Pitch Threads: (32) 3-56 TPI •Metric Pitch Threads: (30) .4-7mm •Model Number: 1440GEVS4 •Motor: 3HP, 440V •Spindle Hole Diameter: 1-1/2 •Spindle Speeds: 36-2200 RPM (Infinite) •Spindle Type: D1-4 •Swing: 14 •Swing over crosslide: 8-3/4 •Swing over gap: 20-3/4 •Tailstock Taper: 3MT •Weight: 1520 lbs

Description:
•Constant Surface Speed - Provides an output that can be applied to an AC inverter spindle drive •The system uses a DRO and the Precision Scale feedback to automatically control spindle RPM with the Highest Accuracy •Advantages of Constant Surface Speed:•Optimum surface cutting speeds improving tool life •Better surface finishes •Includes a Digital Readout as Standard Equipment •1 Year Warranty Parts •F.O.B. ANAHEIM, CA

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1550.0000 •An additional $250.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$15,754.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe w/ CCS - #1740GEVS2 17'' Swing; 40'' Between Centers; 7.5HP; 220V Motor

Item #: RA601740GEVS2
Manufacturer: Acer
Mfg #: 1740GEVS2

Technical Specifications:
•Brand Name: Acer •Center Taper: 4MT •Cross slide travel: 8-5/8 •Distance Between Centers: 40 •Inch Pitch Threads: (36) 4-56 TPI •Metric Pitch Threads: (22) .5-7mm •Model Number: 1740GEVS •Motor: 7.5HP, 220V •Spindle Hole Diameter: 2-1/4 •Spindle Speeds: 25-2200 RPM (Infinite) •Spindle Type: D1-6 •Swing: 17 •Swing over crosslide: 9-5/8 •Swing over gap: 26 •Tailstock Taper: 4MT •Weight: 3500 lbs

Description:
•Constant Surface Speed - Provides an output that can be applied to an AC inverter spindle drive •The system uses a DRO and the Precision Scale feedback to automatically control spindle RPM with the Highest Accuracy •Advantages of Constant Surface Speed:•Optimum surface cutting speeds improving tool life •Better surface finishes •Includes a Digital Readout as Standard Equipment •1 Year Warranty Parts •F.O.B. ANAHEIM, CA

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 3950.0000 •An additional $250.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$23,300.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe w/ CCS - #1760GEVS2 17'' Swing; 60'' Between Centers; 7.5HP; 220V Motor

Item #: RA601760GEVS2
Manufacturer: Acer
Mfg #: 1760GEVS2

Technical Specifications:
•Brand Name: Acer •Center Taper: 4MT •Cross slide travel: 8-5/8 •Distance Between Centers: 60 •Inch Pitch Threads: (36) 4-56 TPI •Metric Pitch Threads: (22) .5-7mm •Model Number: 1760GEVS •Motor: 7.5HP, 220V •Spindle Hole Diameter: 2-1/4 •Spindle Speeds: 25-2200 RPM (Infinite) •Spindle Type: D1-6 •Swing: 17 •Swing over crosslide: 9-5/8 •Swing over gap: 26 •Tailstock Taper: 4MT •Weight: 3950 lbs

Description:
•Constant Surface Speed - Provides an output that can be applied to an AC inverter spindle drive •The system uses a DRO and the Precision Scale feedback to automatically control spindle RPM with the Highest Accuracy •Advantages of Constant Surface Speed:•Optimum surface cutting speeds improving tool life •Better surface finishes •Includes a Digital Readout as Standard Equipment •1 Year Warranty Parts •F.O.B. ANAHEIM, CA

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 3950.0000 •An additional $300.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$25,135.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Electronic Variable Speed Lathe w/ CCS - #1760GEVS4 17'' Swing; 60'' Between Centers; 7.5HP; 440V Motor 3PH

Item #: RA601760GEVS4
Manufacturer: Acer
Mfg #: 1760GEVS4

Technical Specifications:
•Brand Name: Acer •Center Taper: 4MT •Cross slide travel: 8-5/8 •Distance Between Centers: 60 •Inch Pitch Threads: (36) 4-56 TPI •Metric Pitch Threads: (22) .5-7mm •Model Number: 1760GEVS4 •Motor: 7.5HP, 440V •Spindle Hole Diameter: 2-1/4 •Spindle Speeds: 25-2200 RPM (Infinite) •Spindle Type: D1-6 •Swing: 17 •Swing over crosslide: 9-5/8 •Swing over gap: 26 •Tailstock Taper: 4MT •Weight: 3950 lbs

Description:
•Constant Surface Speed - Provides an output that can be applied to an AC inverter spindle drive •The system uses a DRO and the Precision Scale feedback to automatically control spindle RPM with the Highest Accuracy •Advantages of Constant Surface Speed:•Optimum surface cutting speeds improving tool life •Better surface finishes •Includes a Digital Readout as Standard Equipment •1 Year Warranty Parts •F.O.B. ANAHEIM, CA

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 3950.0000 •An additional $300.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

$25,747.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Elite 5C Lever Type Collet Closer For E-1236VS Lathe

Item #: RB21892006
Manufacturer: Jet
Mfg #: 892006

Technical Specifications:
•Brand Name: Jet

Description:

Shipping Info:
•Actual Weight - 54.0000

$2,578.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Elite 5C Lever Type Collet Closer For EGH-1740 and EGH-1760 Lathes

Item #: RB21892156
Manufacturer: Jet
Mfg #: 892156

Technical Specifications:
•Brand Name: Jet

Description:

Shipping Info:
•Actual Weight - 50.0000

$2,436.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Elite 5C Lever Type Collet Closer For EGH-1880; EGH-2180 and EGH-21120 Lathes

Item #: RB21892253
Manufacturer: Jet
Mfg #: 892253

Technical Specifications:
•Brand Name: Jet

Description:

Shipping Info:
•Actual Weight - 50.0000

$2,550.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Elite 5C Lever Type Collet Closer For EVS-1340 and EVS-1440 Lathes

Item #: RB21892036
Manufacturer: Jet
Mfg #: 892036

Technical Specifications:
•Brand Name: Jet

Description:

Shipping Info:
•Actual Weight - 54.0000

$2,344.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It