Products

• Masking Tape: 24 mm Wide, 55 m Long, 6.7 mil Thick, Green Paper, Rubber Adhesive, 25 lb/in Tensile Strength
• Cut-Off Inserts; Insert Style: QD-N; Insert Size Code: J; Insert Material: HC; Manufacturer Grade: 4425; Cutting Width (Decimal Inch): 0.1969; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angle: 7.00; Corner Radius (Decimal I
• Cut-Off Inserts; Insert Style: QD-N; Insert Size Code: J; Insert Material: HC; Manufacturer Grade: 4425; Cutting Width (Decimal Inch): 0.1969; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angle: 7.00; Corner Radius (Decimal I
• Cut-Off Inserts; Insert Style: QD-N; Insert Size Code: J; Insert Material: HC; Manufacturer Grade: 4425; Cutting Width (Decimal Inch): 0.1969; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angle: 7.00; Corner Radius (Decimal I
• Taper Length Drill Bit: 0.0700″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Taper Length Drill Bit: 0.0785″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Corner Radius End Mill: 1/8″ Dia, 3/4″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Taper Length Drill Bit: 0.0860″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Corner Radius End Mill: 1/8″ Dia, 3/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Taper Length Drill Bit: 0.0890″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish 0.5″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 307
• Taper Length Drill Bit: 0.0935″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish 0.5″ Thread Length, 3.54″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 307
• Taper Length Drill Bit: 0.0827″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish 0.5″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 307
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish 0.5″ Thread Length, 3.54″ OAL, Right Hand Flute, Right Hand Thread, H4, Series 307
• Indexable Drill Insert: 34 BK8425, Carbide TiAlN & TiN Finish, Square
• Indexable Drill Insert: 32 BK8425, Carbide TiAlN & TiN Finish, Square
• Screw Machine Length Drill Bit: 0.18″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Micro Drill Bit: 0.1122″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1043″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1083″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1024″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1181″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1142″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1004″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1102″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1161″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1063″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Square End Mill: 1/16'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.025″ Dia, 0.037″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.055″ Dia, 0.165″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.05″ Dia, 0.15″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.075″ Dia, 0.225″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.062″ Dia, 5/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1695″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1730″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1820″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1890″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Corner Radius End Mill: 0.031″ Dia, 5/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Corner Radius End Mill: 0.093″ Dia, 0.95″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1083″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use Tool
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use To
• Corner Radius End Mill: 5/16″ Dia, 1″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Taper Length Drill Bit: 0.0492″ Dia, 130 ° Bright/Uncoated, 2.5625″ OAL, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Deep Groove Ball Bearing: 1,176 lb Static Load
• Corner Radius End Mill: 1/32″ Dia, 5/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Deep Groove Ball Bearing: 1,176 lb Static Load
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.093″ Dia, 0.95″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.062″ Dia, 5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Ball End Mill: 0.047″ Dia, 0.141″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Manual Hold-Down Toggle Clamp: Horizontal, 750 lb Capacity, U-Bar, Flanged Base 59 ° Handle Movement, 93 ° Bar Opening, Steel
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 9/64'' Dia, 1/2'' LOC, 3/16'' Shank Dia, 2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.03″ Dia, 0.045″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Knob Locksets
• Threaded Pipe Sealants
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D8 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D6 Series 14101
• 3/16″ Head Diam, 3/16″ Shank Diam, 4 Flute 120° Solid Carbide Countersink Bright Finish, 2″ OAL, Double End, Straight Shank, Right Hand Cut
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D7 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D7 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D8 Series 14101
• Pipe Fitting: 3/4 x 3/4″ Fitting, 304 Stainless Steel 150 psi
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D6 Series 14101
• Ink: Black Use with PIXMA MG6822 White, Silver Wireless, PIXMA MG7720 Red Wireless, PIXMA TS6020 Printer Black, PIXMA TS6020 Gra
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D4 Series 14101
• Spot Welder Tips; Tip Type: Double Bend Tip D Nose (Offset); Material: RWMA Class 2 - C18200; Type: Double Bend Tip D Nose (Offset)
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D4 Series 14101
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, PM Cobalt, SUPER-B Finish 8″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, H3, Series E812
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 13.50; Maximum Range (mm): 14.00
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 4.50; Maximum Range (mm): 5.00
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, 3B, HSS-E, GLT-1 Finish 3.1496″ OAL, Right Hand, H3, Series BU20C310
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 11.50; Maximum Range (mm): 12.00
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 11.00; Maximum Range (mm): 11.50
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 10.50; Maximum Range (mm): 11.00
• Strip: Neoprene Rubber, 3/4″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 14.50; Maximum Range (mm): 15.00
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 10.00; Maximum Range (mm): 10.50
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 14.00; Maximum Range (mm): 14.50
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 9.50; Maximum Range (mm): 10.00
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 9.00; Maximum Range (mm): 9.50
• Toilet, Urinal, Blocks & Screens; Material: Plastic; Scent: Cherry; Contains Paradichlorobenzene: No; Color: Red; Product Size (oz.): 3.50
• Spiral Flute Tap: #6-40, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-8 Finish 2.205″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50S800
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 13.00; Maximum Range (mm): 13.50
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 12.50; Maximum Range (mm): 13.00
• Retention Knob: CAT40, 5/8-11 Thread, 60 ° Angle Radius, 0.59″ Knob Dia 2.25″ OAL
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 8.50; Maximum Range (mm): 9.00
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 7.50; Maximum Range (mm): 8.00
• ER16 Spanner Wrench For Use with ER Hex Nuts
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 12.00; Maximum Range (mm): 12.50
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 8.00; Maximum Range (mm): 8.50
• Square End Mill: 3mm LOC, 1mm Shank Dia, 50mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 15.00; Maximum Range (mm): 15.50
• Square End Mill: 4.5mm LOC, 1.5mm Shank Dia, 50mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Retention Knob: M8 x 1.25 Thread, 16 mm Knob Dia
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 2.50; Maximum Range (mm): 3.00
• Ball End Mill: 0.07″ Dia, 0.105″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.08″ Dia, 0.24″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 7.00; Maximum Range (mm): 7.50
• Dead Centers; Center Type: Half Center; Shank Type: Morse Taper; Shank Taper Size: MT2; Point Style: Center; Carbide-Tipped: No; Head Diameter (Decimal Inch): 0.7100; Overall Length (mm): 100.00; Included Angle: 60; Overall Length: 100 mm
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 6.50; Maximum Range (mm): 7.00
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 6.00; Maximum Range (mm): 6.50
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 5.00; Maximum Range (mm): 5.50
• Corner Radius End Mill: 1/4″ Dia, 2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 5.50; Maximum Range (mm): 6.00
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.2″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 10' Long x 8' Wide, 12 mil Polyethylene, Rectangle
• Square End Mill: 3/16'' Dia, 0.285'' LOC, 3/16'' Shank Dia, 2'' OAL, 5 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 4.00; Maximum Range (mm): 4.50
• Square End Mill: 1/16'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 3.50; Maximum Range (mm): 4.00
• #6-32, 2-1/4″ OAL, 5/16″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 2″ Body Length, 1/4″ Thread Length, 3/8″ Thread Depth, Grade T-3, Uncoated
• Engraving Cutter: 600 °, 1/4″ Dia, 0.03″ Tip Dia, Tipped Off Point, Solid Carbide AlTiN Nano Finish, 0.19″ LOC, 1/4″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Hardened Steel
• M3x0.50, 9.76mm OAL, 4.5mm Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 5mm Body Length, 4.76mm Thread Length, 1.9mm Thread Depth, Grade 6/6, Uncoated
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 3.00; Maximum Range (mm): 3.50
• Engraving Cutter: 600 °, 1/4″ Dia, 0.005″ Tip Dia, Tipped Off Point, Solid Carbide AlTiN Nano Finish, 0.212″ LOC, 1/4″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Hardened Steel
• M4x0.7, 17.53mm OAL, 6mm Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 8mm Body Length, 9.53mm Thread Length, 11.1mm Thread Depth, Grade 360, Zinc-Plated
• Engraving Cutter: 900 °, 1/4″ Dia, 0.005″ Tip Dia, Tipped Off Point, Solid Carbide AlTiN Nano Finish, 0.122″ LOC, 1/4″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Hardened Steel
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 15.50; Maximum Range (mm): 16.00
• #4 Screw 5/8″ OAL 0.115″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• Corner Radius End Mill: 0.1″ Dia, 1/2″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• General Purpose Work Gloves: X-Large, Durahide DRY, Sherpa & C40 3M Thinsulate Black & Gray
• General Purpose Work Gloves: Small, TrekDry, Thermoplastic Elastomer & Synthetic Leather Gray
• Chucking Reamer: 0.074″ Dia, 1-3/4″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• General Purpose Work Gloves: Large, Fleece, Nylon, Leather, Thinsulate & Thermoplastic Elastomer Black & Gray
• Wall Plates; Wall Plate Type: Blank Wall Plates; Wall Plate Configuration: Blank Center Panel; Shape: Rectangle; Wall Plate Size: Standard; Number of Gangs: 1; Overall Length (Inch): 4-9/16; Overall Width (Decimal Inch): 2-13/16; Overall Length (Decimal I
• General Purpose Work Gloves: Small, TrekDry, Thermoplastic Elastomer & Synthetic Leather Brown
• General Purpose Work Gloves: Small, TrekDry, Thermoplastic Elastomer & Synthetic Leather Black
• Vacuum Cleaner Filters; Filter Type: General Purpose Filter; Application: Wet Pick-Up Only; For Use With 2: Ridgid Wet/Dry Vacuums 5-18 Gal; Compatible Vacuum Capacity: 10 gal (US); 12 gal (US); 16 gal (US); 6 gal (US); 8 gal (US); 5.00 gal (US); Package
• Die Drill Bit: 0.2205″ Dia, 135 °, Solid Carbide Coated, Series 200
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• Pneumatic & Valve Lockouts; Type: Gate Valve Lockout; Valve Lockout Type: Gate Valve; Maximum Valve Handle Size (Inch): 2-1/2; Maximum Pipe Diameter (Inch): 2-1/2; Minimum Valve Handle Width: 1 in; Minimum Valve Handle Size (Inch): 1; 1 in; Minimum Pipe D
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Metalworking Fluids & Coolants
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Stainless Steel Pipe Nipple: 1/4" Pipe, Grade 304
• Metal Flareless Bite Type Tube Fittings; Outside Diameter (mm): 6; Fitting Type: 90 Elbow; Material: Steel; Thread Standard: BSPP; Tube Outside Diameter: 6 mm; Maximum Working Pressure: 100 bar; Thread Size: 1/8 in; 1/8; Thread Type: BSPT; PSC Code: 4720;
• Chucking Reamer: 0.3543″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, Cobalt 6 Flute
• Traffic Barrels, Delineators & Posts; Type: Handle Top Delineator; Material: LDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 28; Width (Inch): 4-1/2; Additional Information: Sub Brand: Watchtower ™; Sheeting Grade: Engineer; Stripe Color: White; D
• #4-40, 0.437″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1/4″ Body Length, 3/16″ Thread Length, 1/8″ Thread Depth, Grade 316, Passivated
• Plastic Sheet: High Density Polyethylene, 1/4″ Thick, Black Shore D-60
• M10 Screw 15mm OAL 10mm ID x 16mm OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Tapcon next generation technology with star drive increases productivity by maintaining drive engagement during installation. Star drive eliminates bit slip for 3/16″ Star Flat Head Tapcon. Tapcon Concrete Anchors Blue Climaseal
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Collet Wrenches; Collet Series: ER11; Head Material: Steel; Handle Material: Steel
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 10.5700; Material: Steel
• Pipe Hose Barb Adaptor: 1/2″ Fitting, 316L Stainless Steel BSPT, 290 psi
• M5x0.8 Coarse 25mm Long Pozi Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Ball Grip Quick-Release Pin: T-Handle, 3/8″ Pin Dia, 1/2″ Usable Length 1.84″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Square End Mill: 0.055'' Dia, 0.165'' LOC, 1/8'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• Corner Radius End Mill: 3/8″ Dia, 5/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Strip: Neoprene Rubber, 4″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Sheet: Neoprene Rubber, 6″ Wide, 6″ Long, Black Durometer 50, Plain Backing
• Square End Mill: 3/16'' Dia, 13/64'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Cut & Abrasion-Resistant Gloves: Size S, ANSI Cut A5, Urethane, HPPE Light Blue, Palm Coated, ANSI Abrasion 4
• Miniature Manual Ball Valve: Full Port, Brass 2-Way Flow & In-Line, Compression x Compression, 1,000 psi WOG
• Chucking Reamer: 0.0795″ Dia, 1-3/4″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Straight Flutes Tap: 3/4-10, UNC, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 2″ Thread Length, 4-1/4″ OAL, Right Hand, H3, Series 726
• Straight Flutes Tap: 3/4-10, UNC, 4 Flutes, Plug, 2B & 3B, High Speed Steel, Bright/Uncoated 2″ Thread Length, 4-1/4″ OAL, Right Hand, H3, Series 727
• Straight Flutes Tap: 3/4-10, UNC, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 2″ Thread Length, 4-1/4″ OAL, Right Hand, H3, Series 727
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 3/8″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• M3x0.50, 9.76mm OAL, 6mm Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 5mm Body Length, 4.76mm Thread Length, 1.9mm Thread Depth, Grade 360, Zinc-Plated
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Plastic Sheet: Garolite, 1/32″ Thick, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Plastic Sheet: Garolite, 1/32″ Thick, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Compression Tube Field Attachable Seal-Lok: Tube Ends O-Ring Face Seal & Flat-Face Steel
• M2.5 Screw 14mm OAL 2.7mm ID x 4.5mm OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Profile Boring Bar: 0.8 mm Min Bore, 4 mm Max Depth, Right Hand Cut, Fine Grain Solid Carbide 4 mm Shank Dia, 25 mm OAL, 0.15 mm Corner Radius
• 19.1mm Shank Length, 24, 28, 32mm Slot Width, 20mm Shank Diam, Alloy Steel Sine Fixture Key 40mm Head Length x 24mm Head Width x 11.1mm Head Thickness
• Turning Insert
• Ball Grip Quick-Release Pin: Button Handle, 8 mm Pin Dia, 15 mm Usable Length 38.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Modular Vises & Components; Component Type: Base (Low Profile); Base; System Compatibility: Panavise; Model Number: 308
• Milling Insert: XOHX 082006-FM5 CTPP216, CTPP216, Solid Carbide N/A Finish,
• Ball Grip Quick-Release Pin: Button Handle, 8 mm Pin Dia, 20 mm Usable Length 43.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Button Handle, 8 mm Pin Dia, 10 mm Usable Length 33.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Square End Mill: 5/64'' Dia, 13/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 10.5700; Material: Steel
• Ball Grip Quick-Release Pin: L-Handle, 12 mm Pin Dia, 60 mm Usable Length 96.8 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: AlTiN; Seri
• Square End Mill: 0.009'' Dia, 0.013'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Washroom Shelves, Soap Dishes & Towel Holders; Material: Metal; Shelf Length: 9.5 in; Shelf Width: 3.39 in; Shelf Depth: 4.43 in; Material: Metal; Depth (Inch): 4.43 in
• Square End Mill: 21/64'' Dia, 1/2'' LOC, 3/8'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Plastic Bar: Polycarbonate, 1/4″ Thick, Clear
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 8; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Chamfer Mill: 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Quick-Change Disc: 5″ Disc Dia, Silicon Carbide, Non-Woven Dark Blue, Cloth Backed, 7,650 RPM
• Chamfer Mill: 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Plastic Sheet: Nylon 6/6, 3/4″ Thick, Black Rockwell M-85
• Spot Welder Tips; Tip Type: Straight Tip E Nose (Truncated); Material: RWMA Class 1 - C15000; Type: Straight Tip E Nose (Truncated)
• Indexable Drill Insert: TOGT09G IC908, Carbide Coated, 60 ° Triangle
• Indexable Drill Insert: TOGT07G IC908, Carbide Coated, 60 ° Triangle
• Indexable Drill Insert: TOGT10G IC908, Carbide Coated, 60 ° Triangle
• Indexable Drill Insert: TOGT08G IC908, Carbide Coated, 60 ° Triangle
• Laydown Threading Inserts; Insert Style: 16ER; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1115; Thread Type: External; Pitch (mm): 2.00; Thread Standard: Trapez; Insert Hand: Right Hand; Included Angle: 30; Series: 16ER; C
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2020; Insert Material: Solid Carbide; Manufacturer Grade: PDL025; Cutting Width (mm): 2.00; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15; Reli
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2520; Insert Material: Solid Carbide; Manufacturer Grade: PDL025; Cutting Width (mm): 2.50; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angl
• Profiling Insert: N123E2 S205, Solid Carbide 0.0394″ Corner Radius, Series CoroCut 1-2
• Profiling Insert: N123E2 S205, Solid Carbide 0.047″ Corner Radius, Series CoroCut 1-2
• Welded Bandsaw Blade: 11' 5″ Long, 3/4″ Wide, 0.032″ Thick, 12 TPI Carbon Steel, Toothed Edge
• Press Fit Headless Drill Bushing: HM, 21″ ID Steel
• Duct Tape: 1/2″ Wide, 2.6 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Black Tee: 1/2 x 3/8 x 3/8″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Manual Ball Valve: 1/4″ Pipe, Full Port, Bronze 2-Piece, 2-Way & In-Line, FNPT, 600 psi WOG
• Spiral Point Tap: #8-32, UNC, 2 Flutes, Plug, 2B, Powdered Metal High Speed Steel, Uncoated 13 mm Thread Length, 63 mm OAL, Right Hand, Series CoroTap 200
• Chucking Reamer: 0.1181″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH