Products

• Welded Bandsaw Blade: 14' 10″ Long, 3/8″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• 3/32″, 3/16″ LOC, 1/8″ Shank Diam, 1-1/2″ OAL, 2 Flute, Solid Carbide Square End Mill Double End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 162
• Hex Head Cap Screw: M8 x 1.25 x 25 mm, Grade 10.9 Steel, Zinc-Plated Partially Threaded, 13 mm Hex, AS 1110, ISO 4014 & ISO 4017
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Ink Cartridge: Black Use with HP DeskJet 3,755 (J9V91A#B1H), HP DeskJet 2,655 (V1N04A#B1H) & HP ENVY 5,055 (M2U85A#B1H)
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Sheet: Silicone Rubber, 18″ Wide, 36″ Long, Red Durometer 60, Plain Backing
• Linear Motion Systems; Type: Linear Guide; Linear Motion Type: Linear Guide; Overall Width (Decimal Inch): 0.6300; Overall Length (mm): 6.3500
• Flexible Coupling: Cast Iron
• Flexible Coupling: Cast Iron
• Flexible Coupling: Cast Iron
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• #4-40, 1.687″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/2″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 303, Uncoated
• M3.5x0.6, 12.35mm OAL, 6mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 6mm Body Length, 6.35mm Thread Length, 2.8mm Thread Depth, Grade 303, Uncoated
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.04″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.031″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Square End Mill: 3/64'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, Upcut Flute, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.125″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Closed Cell EPDM Foam: 12″ Wide, 24″ Long, Black Acrylic Adhesive Backing
• Tool Pouches & Holsters; Holder Type: Tool Pouch; Tool Type: Wrenches, Ratchets, Extensions; Closure Type: Tie; Material: Vinyl; Color: Blue, Black
• Micro Drill Bit: 0.067″ Dia, 130 °, Solid Carbide TiB2 Finish, RH Cut, Spiral Flute
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Micro Drill Bit: 0.0625″ Dia, 130 °, Solid Carbide TiB2 Finish, RH Cut, Spiral Flute
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Shop Roll
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Shop Roll
• Tapered End Mill: 22.5 ° per Side, 0.194″ LOC, 2 Flutes, Solid Carbide, Ball End 2″ OAL, Uncoated, Series Runner Cutters
• Shop Roll
• Tapered End Mill: 7 ° per Side, 0.286″ LOC, 2 Flutes, Solid Carbide, Ball End 1″ Shank Dia, 1-1/2″ OAL, Uncoated, Series Runner Cutters
• Tapered End Mill: 7 ° per Side, 0.401″ LOC, 2 Flutes, Solid Carbide, Ball End 1″ Shank Dia, 1-1/2″ OAL, Uncoated, Series Runner Cutters
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, nACRo Coated, Corner Radius End
• Shop Roll
• Double Angle Milling Cutter: 90 °, 1/8″ Cut Dia, 0.073″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, Uncoated, 4 Teeth
• Micro Drill Bit: 0.042″ Dia, 140 °, Solid Carbide AlTiN Finish, RH Cut, Spiral Flute
• Double Angle Milling Cutter: 45 °, 3/16″ Cut Dia, 0.095″ Cut Width, 3/16″ Shank Dia, Solid Carbide 2″ OAL, Uncoated, 4 Teeth
• Trade Hammers; Handle Material: Hickory
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Flute Tap: M12 x 1.75, Metric Coarse, 3 Flute, Plug, 6H Class of Fit, Vanadium High Speed Steel, Bright/Uncoated 0.935″ Thread Length, 3.38″ OAL, Right Hand Flute, Right Hand Thread, D6
• Plastic Bar: Polytetrafluoroethylene, 3/32″ Thick, White
• Micro Drill Bit: 0.055″ Dia, 140 °, Solid Carbide AlTiN Finish, RH Cut, Spiral Flute
• Clear Double-Sided Polyester Film Tape: 1/2″ Wide, 2 yd Long, 8.3 mil Thick, Acrylic Adhesive
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, Black Shore D-70
• Toilet Seats; Type: Open Front w/o Cover; Style: Round; Material: Plastic; Color: Bone; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 17; Minimum Order Quantity: Plastic; Material: Plastic
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Crane White; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 17; Minimum Order Quantity: Plastic; Material: Plastic
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Biscuit; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 17; Minimum Order Quantity: Plastic; Material: Plastic
• Plastic Bar: Acetal, 1″ Thick, White
• Jobber Length Drill Bit: 0.4016″ Dia, 130 °, High Speed Steel Bright/Uncoated, 5.2362″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Sheet: EPDM Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Plain Backing
• Polyester Film Tape: 1-1/2″ Wide, 10 yd Long, 3.5 mil Thick 46 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Plastic Bar: Acetal, 1″ Thick, Black Rockwell M-90
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 2; Length (yd): 20.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 46
• Ball End Mill: 0.065″ Dia, 0.195″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Arc Flash & Flame Protection Gloves; Protection Type: Arc Flash; Maximum Arc Flash Protection (cal/Sq. cm): 14.0 cal/cm ™; Hand: Paired; Lining Material: Unlined; Size: 2X-Large; PSC Code: 4240; Maximum Arc Flash Protection Rating: 14.0 cal/cm ™
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.075″ Dia, 0.225″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 7.200; Material Grade: Submicron; Maximum Bore Depth (mm): 25.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Finish Coating: TiCN; Serie
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 7.200; Material Grade: Submicron; Maximum Bore Depth (mm): 30.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 61.0000; Finish Coating: TiCN; Serie
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 35.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 61.0000; Finish Coating: AlTiN; Seri
• Thread Repair Kit: Threaded Insert Stainless Steel Insert
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 30.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 56.0000; Finish Coating: AlTiN; Seri
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 35.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 61.0000; Finish Coating: TiCN; Serie
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 30.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 56.0000; Finish Coating: TiCN; Serie
• Thread Repair Kit: Threaded Insert Stainless Steel Insert
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 35.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 60.0000; Finish Coating: AlTiN; Seri
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 30.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 55.0000; Finish Coating: AlTiN; Seri
• 45mm Bore Diam, Stainless Steel Metric Internal Snap Retaining Ring 48.5mm Free OD, 1.85mm Groove Width x 1.25mm Groove Depth, 1.75mm Ring Thickness
• Push-To-Connect Tube Fitting: Tube Elbow Barb Connector, 5/16 x 5/16″ OD Kynar, 230 psi
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 35.0000; Finish Coating: AlTiN; Seri
• Cut & Puncture-Resistant Gloves: Size L, ANSI Cut A9, ANSI Puncture 5, Nitrile, HPPE Black & Yellow, 10″ OAL, Palm & Fingertips Coated, Coretex Lined, HPPE Back, Nitrile Dipped Grip
• Flexible Cylinder Hone: 180 Grit, Silicon Carbide Coarse Grade, 7-7/8″ OAL
• Cut & Puncture-Resistant Gloves: Size 2XL, ANSI Cut A9, ANSI Puncture 5, Nitrile, HPPE Black & Yellow, 10″ OAL, Palm & Fingertips Coated, Coretex Lined, HPPE Back, Nitrile Dipped Grip
• Corner Radius End Mill: 0.0197″ Dia, 0.0591″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Corner Radius End Mill: 0.0197″ Dia, 0.0295″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Safe-Lock; Flute Type: Helical
• Corner Radius End Mill: 0.0787″ Dia, 0.2756″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.1181″ Dia, 0.315″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.0787″ Dia, 0.2756″ LOC, 4 Flute, 0.0039″ Chamfer Width, Solid Carbide 2.28 mm OAL, AlTiN Coated, Centercutting
• Drill Mills; Number Of Flutes: 2; End Mill Material: Solid Carbide; Helix Angle: 20.00; Point Angle: 90.00; Overall Length: 3.11
• Drill Mills; Number Of Flutes: 2; End Mill Material: Solid Carbide; Helix Angle: 20.00; Point Angle: 60.00; Overall Length: 3.11
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Safe-Lock; Flute Type: Helical
• Hex Head Cap Screw: 1/2-13 x 1-3/4″, Grade 5 Steel, Zinc-Plated Fully Threaded
• Traffic Barrels, Delineators & Posts; Type: Open Top Delineator; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 4-5/8; Additional Information: Sheeting Grade: Diamond; Stripe Width: 4 in; Stripe Color: White; Series: 6842; Post D
• Drill Mills; Number Of Flutes: 2; End Mill Material: Solid Carbide; Helix Angle: 20.00; Point Angle: 142.00; Overall Length: 3.11
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Safe-Lock; Flute Type: Helical
• Taper Length Drill Bit: 0.3366″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 4 Flute, 0.0039″ Chamfer Width, Solid Carbide 2.28 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Straight; Flute Type: Helical
• Cut & Puncture-Resistant Gloves: Size XL, ANSI Cut A6, ANSI Puncture 4, Sandy Nitrile, Acrylic & Fiberglass Blend High-Visibility Yellow & Black, Full Coated, Sandy Grip
• Square End Mill: 0.018'' Dia, 0.027'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball Grip Quick-Release Pin: Button Handle, 5 mm Pin Dia, 50 mm Usable Length 71.1 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Square End Mill: 0.017'' Dia, 0.026'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball Grip Quick-Release Pin: Button Handle, 5 mm Pin Dia, 40 mm Usable Length 61.1 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Button Handle, 5 mm Pin Dia, 30 mm Usable Length 51.1 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Button Handle, 5 mm Pin Dia, 25 mm Usable Length 46.1 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• A2022N00 CF02 KCU25 Carbide Cutoff Insert AlTiN Finish, 0° Neutral Lead Angle, Neutral Insert, 2.2mm Cutting Width, 0.008″ Corner Radius, Series A2
• Ball End Mill: 0.2188″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End, Series SAPB-NB
• Extra Length Drill Bit: 0.2165″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Temporary Structure Parts & Accessories; Type: Platform Accessory; Height (Feet): 3
• Cut, Puncture & Abrasive-Resistant Gloves: Size M, ANSI Cut A3, ANSI Puncture 2, Polyvinylchloride, Nylon Black, Palm & Fingers Coated, Acrylic Lined, Thermoplastic Elastomer Back, Palm Coat Grip, ANSI Abrasion 3
• Cut, Puncture & Abrasive-Resistant Gloves: Size L, ANSI Cut A3, ANSI Puncture 2, Polyvinylchloride, Nylon Black, Palm & Fingers Coated, Acrylic Lined, Thermoplastic Elastomer Back, Palm Coat Grip, ANSI Abrasion 3
• Cut, Puncture & Abrasive-Resistant Gloves: Size XL, ANSI Cut A3, ANSI Puncture 2, Polyvinylchloride, Nylon Black, Palm & Fingers Coated, Acrylic Lined, Thermoplastic Elastomer Back, Palm Coat Grip, ANSI Abrasion 3
• Cut, Puncture & Abrasive-Resistant Gloves: Size 2XL, ANSI Cut A3, ANSI Puncture 2, Polyvinylchloride, Nylon Black, Palm & Fingers Coated, Acrylic Lined, Thermoplastic Elastomer Back, Palm Coat Grip, ANSI Abrasion 3
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.1981MC
• Indexable Drill Insert: 800L 1025, Carbide TiAlN & TiN Finish, 5/32″ Thick, 11 ° Rectangle
• Boring Head Parts & Tools; Type: Shim; Head Part Type: Shim; Minimum Bore Size: 2.5200 in; Maximum Bore Size: 3.3860 in; Mfr's Part No. Compatibility: A61050; Connection Size: BA060; G5
• Boring Head Parts & Tools; Type: Shim; Head Part Type: Shim; Minimum Bore Size: 3.3460 in; Maximum Bore Size: 4.5280 in; Mfr's Part No. Compatibility: A61060; Connection Size: BA080; G6
• Boring Head Parts & Tools; Type: Shim; Head Part Type: Shim; Minimum Bore Size: 1.5350 in; Maximum Bore Size: 2.0080 in; Mfr's Part No. Compatibility: A61030; Connection Size: GL40; G3
• Corner Radius End Mill: 3/8″ Dia, 7/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Head Parts & Tools; Type: Shim; Head Part Type: Shim; Minimum Bore Size: 1.9690 in; Maximum Bore Size: 2.5590 in; Mfr's Part No. Compatibility: A61040; Connection Size: GL50; G4
• Ball End Mill: 0.0315″ Dia, 2 Flute, Solid Carbide 40 mm OAL, 4 mm Shank Dia, 25 ° Helix, DUROREY Coated, Single End
• Corner Radius End Mill: 3/16″ Dia, 15/64″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 3/16″ Dia, 15/64″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Ball End Mill: 0.025″ Dia, 0.125″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill Head: 3/16″ Dia, 9/16″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Ball End Mill: 0.01″ Dia, 0.05″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.031″ Dia, 0.045″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill Head: 3/16″ Dia, 9/16″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Manual Dusters; Material: Fiber; Plastic; Overall Length (Inch): 14; Handle Length (Inch): 14; Replacement: No; Color: Yellow; Additional Information: Bristle Length: 6 in; Bristle Depth: 2 in; Length (Inch): 6; Type: Heavy Duty Duster Starter Kit; Includ
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Silicone Tube: 5/8″ OD, 10' Length 40 Max psi, Clear
• Suit with Bib Overalls: Size S, ASTM D6413, Yellow, PVC
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• 5/16″ Screw 3/32″ OAL 0.315″ ID x 3/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Flashlights; Bulb Type: LED; Type: Headlamp; Maximum Light Output (Lumens): 560; Body Type: Plastic; Battery Size: AA; Body Color: Black; Rechargeable: No; Complete Light Output (Lumens): 550 (High)
• Tool Pouches & Holsters; Holder Type: Tool Pouch; Tool Type: Wrenches, Ratchets, Extensions; Closure Type: Tie; Material: Vinyl; Color: Blue, Black
• Polyester Film Tape: 2″ Wide, 10 yd Long, 2.4 mil Thick 26 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Spiral Flute Tap: #10-24, UNC, 3 Flute, 1.5-2 P, 3B Class of Fit, HSS-E, GLT-1 Finish Right Hand Flute, Right Hand Thread, H3
• Corner Radius End Mill: 0.1562″ Dia, 15/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Die Drill Bit: 0.2244″ Dia, 135 °, Solid Carbide Coated, Series 200
• Ball End Mill: 0.062″ Dia, 0.5″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Die Drill Bit: 0.2283″ Dia, 135 °, Solid Carbide Coated, Series 200
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 9/32″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Die Drill Bit: 0.2323″ Dia, 135 °, Solid Carbide Coated, Series 200
• Corner Radius End Mill: 0.1562″ Dia, 15/64″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.156″ Dia, 15/64″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 9/32″ LOC, 0.045″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Socket Set: 3/8″ Drive 9 to 19 mm Socket, 6 Point
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/16″ Dia, 0.281″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Hex Head Cap Screw: 1/2-20 x 6-1/2″, Grade 8 Steel, Uncoated Partially Threaded, ASME B18.2.1
• Lumber; Thickness: 2; Width: 6; Length Ft.: 12; Wood Type: Southern Yellow Pine; Treated: KDHTPT
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 0.018'' Dia, 0.027'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 3/16″ Dia, 9/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.156″ Dia, 15/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.1181″ Dia, 0.1575″ LOC, 2 Flute, Solid Carbide 57 mm OAL, 6 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 3/16″ Dia, 9/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Clear Lenses, Wraparound, UV Protection Black Frame, Single
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/4″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• White Double-Sided Foam Tape: 3/4″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Tool Pouches & Holsters; Holder Type: Tool Pouch; Tool Type: Wrenches, Ratchets, Extensions; Closure Type: Tie; Material: Vinyl; Color: Blue, Black
• Boring Bar: 0.29″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.29″ Min Bore, 0.9″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.29″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.23″ Min Bore, 1-13/64″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.23″ Min Bore, 1.15″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.23″ Min Bore, 0.7″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL
• Plastic Sheet: Acetal, 1/16″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Black Cap: 1-1/2″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Taper Length Drill Bit: 0.2656″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Hex Head Cap Screw: 9/16-18 x 4-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Taper Length Drill Bit: 0.2598″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Wet & Dry Cut Saw Blade: 10-1/4″ Dia, 5/8″ Arbor Hole, 0.057″ Kerf Width, 24 Teeth Use on Wood Cutting, Round with Diamond Knockout Arbor
• Fixture Accessories; Type: Locating Key; For Use With: 130 mm 5-Axis Riser
• Inventory Control Label: Rectangle, 2″ Wide, 3″ High Paper
• Sheet: Silicone Rubber, 12″ Wide, 12″ Long, Semi-Clear Durometer 60, High Temperature Adhesive Backing
• Inventory Control Label: Rectangle, 2″ Wide, 3″ High Paper
• #4 Screw 1″ OAL 0.115″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• #8 Screw 1″ OAL 0.166″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• Handheld Buffer & Polisher Accessories; Accessory Type: Buffing Wheel; Diameter (Inch): 2-1/2; Material: Carbide
• Handheld Buffer & Polisher Accessories; Accessory Type: Buffing Wheel; Diameter (Inch): 2; Material: Carbide
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 10.0000; Outside Diameter: 16.0000; Wall Thickness (mm): 3.00; Material: EPDM; Standard Coil Length (Feet): 5; Maximum Working Pressure (psi): 145; Hardness: 75A; Special Item Information: Polyester
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• Strip: EPDM Rubber, 3/4″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• Traffic Barrels, Delineators & Posts; Type: Handle Top Delineator; Material: LDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 42; Width (Inch): 4-1/2; Additional Information: Sub Brand: Watchtower ™; Series: 7342; Stripe Width: 3 in; Stripe Color:
• #4-40, 2.4369″ OAL, 1/4″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/4″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 303, Uncoated
• #8-32, 2-5/8″ OAL, 1/4″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/4″ Body Length, 3/8″ Thread Length, 7/16″ Thread Depth, Grade 303, Uncoated
• Press Fit Headless Drill Bushing: HM, 7.5″ ID Steel
• Press Fit Headless Drill Bushing: HM, 7.3″ ID Steel
• Press Fit Headless Drill Bushing: HM, 7″ ID Steel
• Press Fit Headless Drill Bushing: HM, 6.8″ ID Steel
• Press Fit Headless Drill Bushing: HM, 6.6″ ID Steel
• Press Fit Headless Drill Bushing: HM, 6.2″ ID Steel
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Size XL, 6 mil, Powder Free Nitrile Disposable Gloves Black, Beaded Rolled Cuffs, Ambidextrous
• Compartment Storage Boxes & Bins; Type: Storage Case; Number of Compartments: 1; Color: White; Material: Corrugated; Material: Corrugated
• Masking Tape: 1-1/2″ Wide, 83.33 yd Long, 4 mil Thick, Yellow Polyvinylchloride Film, 0.48 lb/in Tensile Strength
• Strip: EPDM Rubber, 1-1/2″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• Strip: Buna-N Rubber, 1/2″ Wide, 120″ Long, Black Durometer 50, Plain Backing
• Hex Nut: 1-1/4 7, Grade L9 Steel, Zinc Yellow Dichromate Cad & Waxed Finish - Right Hand Thread, 1-7/8″ Across Flats
• Earmuffs: 22 dB NRR Behind the Neck, Foam Cushion Foam Cushion, Gray Plastic Cups, ANSI S3.19-1974
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• Electrical Outlet Box & Switch Box Accessories; Overall Height: 4.0500 in; Overall Height (Decimal Inch): 4.0500 in; Additional Information: For use with Bryant Flanged Inlet
• Packing Tape: 3″ Wide, 60 yd Long, Brown, Natural Synthetic Rubber Adhesive Kraft Paper, 7.2 mil Thick, 40 lb/in Tensile Strength
• Ball Grip Quick-Release Pin: Ring Handle, 5/8″ Pin Dia, 4″ Usable Length 5.84″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• Manual Ball Valve: 1″ Pipe, Standard Port FNPT x FNPT
• Closed Cell EPDM Foam: 12″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Heated Snow Matting Accessories
• Hex Head Cap Screw: 7/16-20 x 3-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0700; Maximum Bore Depth (Decimal Inch): 1/4; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 0.1500; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Laydown Threading Insert DELETE
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1000; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• 3E28UNTM2 VK2 Carbide Thread Mill Insert Uncoated, External, UN, 28 TPI
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1000; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1100; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Hard Hat: Type 1, Class E, 6-Point Suspension Black, HDPE, Slotted
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1100; Maximum Bore Depth (Decimal Inch): 0.4000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1220; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 1/4; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1240; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1240; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1100; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1100; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1100; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0020; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Black Reducing Coupling: 1 x 3/4″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1100; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0020; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1000; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0020; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Black 90 ° Street Elbow: 1/2″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1000; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0020; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0020; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0020; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim