Products

• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.198″ ID, 0.754″ OD, 0.041″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.154″ ID, 0.467″ OD, 0.042″ Thick
• Traffic Cone & Barricade Accessories; Accessory Type: Traffic Cone Adapter; Recycled Content: 0; Height (Inch): 4.5; Height (Decimal Inch): 4.5; Material: Rubber; Steel; Tape Length (Feet): 3.75; For Use With: Safety Lights; Length (Inch): 3.75; Type: Tra
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.213″ ID, 0.581″ OD, 0.072″ Thick
• Precision Compression Spring: 0.7600" OD, 5" Free Length
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.321″ OD, 0.041″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.198″ ID, 0.365″ OD, 0.013″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.219″ ID, 3/4″ OD, 0.034″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.439″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.56″ OD, 0.055″ Thick
• Faucet Replacement Parts & Accessories; Type: Pre-Rinse Spray Head Bumper; Type: Pre-Rinse Spray Head Bumper; Type: Pre-Rinse Spray Head Bumper; Type: Pre-Rinse Spray Head Bumper; Type: Pre-Rinse Spray Head Bumper; Description: Krowne 21-142 Bumper for Ol
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.198″ ID, 0.393″ OD, 0.012″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.172″ ID, 0.436″ OD, 0.07″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.193″ ID, 0.558″ OD, 0.023″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.2″ ID, 0.437″ OD, 0.056″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.565″ OD, 0.043″ Thick
• Saw Machine Parts & Accessories; Accessory Type: Air Hydraulic Feed; For Use With: 4V Series Vertical Bandsaw; For Use With: 4V Series Vertical Bandsaw
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.469″ OD, 0.03″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.282″ OD, 0.051″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.246″ ID, 0.59″ OD, 0.042″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.203″ ID, 0.747″ OD, 0.051″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.189″ ID, 0.997″ OD, 0.054″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.72″ OD, 0.054″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.2″ ID, 0.531″ OD, 0.026″ Thick
• Wire Disconnects; Gender: Male; Insulation Type: Fully Insulated; Insulation Material: Nylon; Connection Type: Crimp; Compatible Wire Size (sq mm): 1.5-2.5; Tab Width (Decimal Inch): 0.187; Tab Width (mm): 0.187 in; 4.75 mm; Color: Blue; Contact Material:
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.376″ OD, 0.051″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.499″ OD, 0.024″ Thick
• Electromagnet Lock Accessories; Type: Wireless Gate Control Kit; For Use With: Outdoor Wireless Readers; Material: Plastic; Material: Plastic; For Use With: Outdoor Wireless Readers; Type: Wireless Gate Control Kit; Accessory Type: Wireless Gate Control K
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.636″ OD, 0.052″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.198″ ID, 0.312″ OD, 0.027″ Thick
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 100.00; Maximum Torque (Ft/Lb): 480.00; Overall Length (Decimal Inch): 35.0000; Head Type: Interchageable; Head Shape: R
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.312″ OD, 0.026″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 7/8″ OD, 0.035″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.203″ ID, 0.62″ OD, 0.046″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.199″ ID, 0.687″ OD, 0.013″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.373″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.167″ ID, 0.312″ OD, 0.035″ Thick
• Replacement/Interchange Hydraulic Filter Element: Microglass, 10 µ
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.197″ ID, 0.614″ OD, 0.035″ Thick
• Extension Ladders; Ladder Type: Multi-Use Telescoping Ladder; Load Capacity (Lb.
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 5″ Usable Length 6.49″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Personal & Medical Digital & Beam Scales; Scale Type: Physician Scale; Display Type: Digital, LCD; Capacity (Lb.): 600; Capacity (Kg): 300; Graduation: .01; Overall Height (Inch): 53; Capacity (oz.): .2
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.563″ OD, 0.034″ Thick
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 3/4″ Usable Length 2.33″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.387″ OD, 0.04″ Thick
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8384; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Pipe Close Nipple: 1/4″ Fitting, 316 Stainless Steel MNPT x MNPT, Threaded, ANSI/ASME B31.1, ANSI/ASME B31.3 & ANSI/ASME B1.20.1, 7,500 psi
• Packing Tape: Brown, Natural Synthetic Rubber Adhesive
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.151″ ID, 0.365″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.355″ OD, 0.054″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.172″ ID, 0.49″ OD, 0.026″ Thick
• Hex Head Cap Screw: M8 x 1.00 x 40 mm, Grade 8.8 Steel, Zinc-Plated Fully Threaded, 13 mm Hex, DIN 961 & ISO 8676
• Sheet: Neoprene Rubber, 12″ Wide, 12″ Long, Black Durometer 65 to 75
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.192″ ID, 0.366″ OD, 0.056″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.252″ OD, 0.007″ Thick
• Ergonomic Multifunction Task Chair: Vinyl, 29" Seat Height, Imperial Blue
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.188″ ID, 0.406″ OD, 0.007″ Thick
• Ergonomic Multifunction Task Chair: Vinyl, 23" Seat Height, Imperial Blue
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.203″ ID, 0.44″ OD, 0.029″ Thick
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 5″ Usable Length 6.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Conduit Bushing: For Rigid & Intermediate (IMC), Plastic, 1/2″ Trade Size Insulated, Threaded Connection
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.749″ OD, 0.052″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.735″ OD, 0.035″ Thick
• Ergonomic Multifunction Task Chair: Vinyl, 23" Seat Height, Taupe
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.181″ ID, 0.556″ OD, 0.072″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.303″ OD, 0.028″ Thick
• Plastic Bar: Polyvinylchloride, 1″ Thick, Dark Gray
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.199″ ID, 0.38″ OD, 0.026″ Thick
• Plastic Sheet: Polycarbonate, 1/8″ Thick, 6″ Long, Clear, 9,000 psi Tensile Strength Rockwell R-120
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.192″ ID, 0.317″ OD, 0.042″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.42″ OD, 0.021″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.197″ ID, 0.688″ OD, 0.054″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.624″ OD, 0.007″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.343″ OD, 0.028″ Thick
• Mobile Work Centers; Center Type: Mobile Bench Cabinet; Load Capacity: 1200; Depth (Inch): 42-1/8; Height (Inch): 36-3/8; Number Of Bins: 0; Color: Gray; Overall Depth: 42.125 in; Overall Height: 36.375 in
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.179″ ID, 0.567″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.567″ OD, 0.007″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.392″ OD, 0.046″ Thick
• Polyurethane Task Chair: Polyurethane, 21-1/2" Seat Height, Blue
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.301″ OD, 0.038″ Thick
• Corner Radius End Mill: 5/8" Dia, 1-1/4" LOC, 0.1200" Radius, 5 Flute, Solid Carbide
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.189″ ID, 0.341″ OD, 0.051″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 0.502″ OD, 0.045″ Thick
• Tool Presetter Accessories; Type: Preset Microset; For Use With: HAIMER Tool Dynamic Balancing Machine
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.498″ OD, 0.045″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.188″ ID, 0.388″ OD, 0.028″ Thick
• Strip: Neoprene Rubber, 1/2″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.215″ ID, 0.998″ OD, 0.055″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.274″ OD, 0.026″ Thick
• Black Hex Bushing: 1-1/4 x 3/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.188″ ID, 0.621″ OD, 0.07″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.514″ OD, 0.035″ Thick
• Tool Presetter Accessories; Type: Balancing Machine; For Use With: HAIMER Tool Dynamic Balancing Machine
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.177″ ID, 0.261″ OD, 0.026″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.311″ OD, 0.036″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.257″ OD, 0.027″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.2″ ID, 0.42″ OD, 0.027″ Thick
• Plastic Sheet: Garolite, 1/16″ Thick, 6″ Long, Yellow, 36,000 psi Tensile Strength Rockwell M-110
• Tool Presetter Accessories; Type: Balancing Machine; For Use With: HAIMER Tool Dynamic Balancing Machine
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.406″ OD, 0.041″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.203″ ID, 0.624″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.35″ OD, 0.016″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.205″ ID, 5/8″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.192″ ID, 0.251″ OD, 0.021″ Thick
• Shop Press: 1.5″ Stroke 48″ Between Uprights, 48-1/2″ Ram to Table
• Turning Insert: CCMT21.51FW4 WKP01G, Carbide
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.195″ ID, 1/2″ OD, 0.026″ Thick
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.8134; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standard
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.398″ OD, 0.066″ Thick
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 12' Long x 10' Wide, 5 mil Polyethylene, Rectangle
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.465″ OD, 0.028″ Thick
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 15' Long x 8' Wide, 5 mil Polyethylene, Rectangle
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.168″ ID, 0.391″ OD, 0.057″ Thick
• Precision Compression Spring: 0.7100" OD, 2-1/2" Free Length
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.44″ OD, 0.028″ Thick
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.4963; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.179″ ID, 0.343″ OD, 0.015″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.201″ ID, 0.501″ OD, 0.032″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.223″ ID, 0.46″ OD, 0.06″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 0.44″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.311″ OD, 0.028″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.935″ OD, 0.042″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.553″ OD, 0.016″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.301″ OD, 0.028″ Thick
• N/A Thread, 1-5/8″ Yoke Width, Mild Carbon Steel, Clevis Pin Yoke 3/4″ Hole Diam, 1-11/16″ Hole Center to Neck, 3/4″ Neck Diam, 1-15/16″ Neck Length, 3-5/8″ OAL
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.223″ ID, 0.32″ OD, 0.028″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.195″ ID, 1/2″ OD, 0.046″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.198″ ID, 3/8″ OD, 0.027″ Thick
• Dust Hood Compatible with Dust Collectors
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.373″ OD, 0.026″ Thick
• Knee Milling Machine: Electronic Variable Speed Control, 3 Phase 50 to 5,000 RPM, NT40 Spindle Taper
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.186″ ID, 0.503″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 3/8″ OD, 0.054″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.205″ ID, 0.344″ OD, 0.009″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.328″ OD, 0.027″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.202″ ID, 0.357″ OD, 0.016″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.203″ ID, 0.468″ OD, 0.012″ Thick
• Plastic Bar: Acetal, 1/16″ Thick, Black Rockwell M-90
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.313″ OD, 0.012″ Thick
• Plastic Bar: Acetal, 1/16″ Thick, White
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.196″ ID, 0.491″ OD, 0.021″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.201″ ID, 0.749″ OD, 0.021″ Thick
• Corner Radius End Mill: 5/8" Dia, 1-1/4" LOC, 0.0150" Radius, 5 Flute, Solid Carbide
• Please Wait Here Rectangle, Black on Yellow, Use for Exit, Entrance & Directional
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.185″ ID, 0.376″ OD, 0.016″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.751″ OD, 0.069″ Thick
• Thank You for Practicting Social Distancing Rectangle, Black on Yellow, Use for Exit, Entrance & Directional
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.193″ ID, 0.327″ OD, 0.007″ Thick
• Spot Welder Tips; Tip Type: Straight Tip E Nose (Truncated); Material: RWMA Class 1 - C15000; Type: Straight Tip E Nose (Truncated)
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.653″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.812″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.329″ OD, 0.021″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.752″ OD, 0.055″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.468″ OD, 0.028″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.283″ OD, 0.012″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.439″ OD, 0.046″ Thick
• Backstop: Use with Interlake Mecalux Pallet Rack
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.197″ ID, 1/2″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.316″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.181″ ID, 0.342″ OD, 0.012″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.185″ ID, 1/2″ OD, 0.035″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.205″ ID, 0.406″ OD, 0.035″ Thick
• Black Hex Bushing: 1-1/4 x 1″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.184″ ID, 0.432″ OD, 0.058″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.195″ ID, 0.342″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.192″ ID, 0.311″ OD, 0.055″ Thick
• Knee Milling Machine: 6.75 x 18.75″, 2 hp, Variable Speed Pulley Control, 3 Phase 60 to 4,200 RPM, R8 Spindle Taper
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.197″ ID, 0.368″ OD, 0.023″ Thick
• Knee Milling Machine: 6.75 x 18.75″, 2 hp, Variable Speed Pulley Control, 3 Phase 60 to 4,200 RPM, R8 Spindle Taper
• Sheet: Neoprene Rubber, 12″ Wide, 12″ Long, Black Durometer 80, Plain Backing
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.167″ ID, 0.328″ OD, 0.041″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.361″ OD, 0.035″ Thick
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 80, Plain Backing
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.202″ ID, 0.74″ OD, 0.057″ Thick
• Freshmatic Ultra Automatic Pure Refill
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.146″ ID, 0.325″ OD, 0.055″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.187″ ID, 0.47″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.376″ OD, 0.055″ Thick
• Pipe Fitting: 3/8 x 3/8″ Fitting, 304 Stainless Steel 150 psi
• 1,000' x 3″ x 2 mil Polyethylene Barricade Tape Legend: Danger
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.187″ ID, 1/2″ OD, 0.016″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.205″ ID, 0.409″ OD, 0.036″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.141″ ID, 0.408″ OD, 0.016″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.328″ OD, 0.055″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.233″ ID, 0.541″ OD, 0.026″ Thick
• Sidewinder Stalk Helmet Clip Accessory
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.173″ ID, 0.998″ OD, 0.027″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 1″ OD, 0.053″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.193″ ID, 0.27″ OD, 0.007″ Thick
• Plastic Bar: Polycarbonate, 1/8″ Thick, Clear
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.408″ OD, 0.027″ Thick
• Plastic Sheet: Garolite, 1/16″ Thick, 6″ Long, Brown, 12,000 psi Tensile Strength Rockwell M-100
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.176″ ID, 0.627″ OD, 0.042″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.376″ OD, 0.013″ Thick
• Hook & Loop Discs; Disc Diameter (Decimal Inch): 6; Grade: Fine; Grit: 150; Abrasive Material: Ceramic Blend; Disc Color: Red; Package Quantity: 10; Grit: 150; Grit: 150; Package Quantity: 10
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.531″ OD, 0.054″ Thick
• Hook & Loop Discs; Disc Diameter (Decimal Inch): 6; Grade: Medium; Grit: 100; Abrasive Material: Ceramic Blend; Disc Color: Red; Package Quantity: 10; Grit: 100; Grit: 100; Package Quantity: 10
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.217″ ID, 0.314″ OD, 0.045″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.618″ OD, 0.05″ Thick
• Hook & Loop Discs; Disc Diameter (Decimal Inch): 6; Grade: Ultra Fine; Grit: 220; Abrasive Material: Ceramic Blend; Disc Color: Red; Package Quantity: 10; Grit: 220; Grit: 220; Package Quantity: 10
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.196″ ID, 0.437″ OD, 0.071″ Thick
• Ball Grip Quick-Release Pin: Ring Handle, 7/16″ Pin Dia, 1-1/4″ Usable Length 2.83″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.402″ OD, 0.035″ Thick
• Vertical Bandsaw: Variable Speed Pulley Drive, 13″ Height Capacity 208 230 460 & 575V, 3 hp, 26″ Table Length, 26″ Table Width
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.196″ ID, 0.353″ OD, 0.021″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 0.481″ OD, 0.036″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.687″ OD, 0.028″ Thick
• Hex Socket Cap Screw: 3/8-16 Thread, 1" Length Under Head, Alloy Steel, Passivated Finish
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.205″ ID, 3/8″ OD, 0.042″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.195″ ID, 0.62″ OD, 0.028″ Thick
• Pipe Fitting: 1/4 x 1/8″ Fitting, 316 Stainless Steel 150 psi
• Spiral Flute Tap:
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.202″ ID, 0.81″ OD, 0.055″ Thick
• Cut, Puncture & Abrasion-Resistant Gloves: Chrome SLT 4066, ANSI Cut A7, ANSI Puncture 3, HPPE & Steel Lined, Buffalo Leather
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.492″ OD, 0.054″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.203″ ID, 1″ OD, 0.057″ Thick
• Silicone Tube: 7/16″ OD, 5' Length 40 Max psi, Clear
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.501″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.182″ ID, 0.472″ OD, 0.035″ Thick
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7634; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.522″ OD, 0.034″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.223″ ID, 0.877″ OD, 0.057″ Thick
• Miniature Manual Ball Valve: 1/4″ Pipe MNPT x FNPT
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.197″ ID, 0.392″ OD, 0.007″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.328″ OD, 0.027″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.657″ OD, 0.053″ Thick
• Wire Disconnects; Gender: Female; Insulation Type: Fully Insulated; Insulation Material: Nylon; Connection Type: Crimp; Compatible Wire Size (sq mm): 0.5-1.5; Tab Width (Decimal Inch): 0.25; Tab Width (mm): 6.34 mm; 0.25 in; Color: Red; Contact Material:
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 5/8″ OD, 0.057″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.306″ OD, 0.028″ Thick
• 3/4 x 4″ 6063 Aluminum Pipe Nipple Threaded with Thread Sealant, Schedule 40
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.198″ ID, 0.616″ OD, 0.041″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.447″ ID, 5/8″ OD, 0.012″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.385″ OD, 0.032″ Thick
• Striping Spray Paint: Blue
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.169″ ID, 0.535″ OD, 0.055″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.214″ ID, 0.591″ OD, 0.025″ Thick
• All-Purpose Cleaner: 32 gal Bottle, Disinfectant Liquid, Fruity Floral Scent
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.193″ ID, 0.501″ OD, 0.051″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.811″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.315″ OD, 0.027″ Thick
• Lumber; Thickness: 2; Width: 10; Length Ft.: 10; Grade: #2; Treated: KDHT
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.186″ ID, 0.41″ OD, 0.035″ Thick
• Hex Head Cap Screw: 3/4-10 x 4″, Grade L9 Steel, Zinc Yellow Dichromate Finish Partially Threaded
• Ergonomic Multifunction Task Chair: Vinyl, 29" Seat Height, Burgundy
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.196″ ID, 0.505″ OD, 0.041″ Thick
• High Visibility Vest CL2 ZIP FRNT ORG XL ECO HI-VIS MESH SFTY VEST
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.195″ ID, 3/4″ OD, 0.034″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.179″ ID, 0.366″ OD, 0.026″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.209″ ID, 3/4″ OD, 0.056″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.87″ OD, 0.032″ Thick