Products

• Spade Drill Accessories; Type: Torx Hand Driver; Accessory Type: Torx Hand Driver; Drill Diameter Range: 0.5320 - 0.6100; Series: 04
• Planer Machines; Cutting Width (Inch): 20; Cutting Width (mm): 508.00; Maximum Cutting Thickness: 3 to 165 mm; 1/8 to 6-1/2 in; Maximum Cutting Width: 20 in; 508.0 mm; Depth of Cut (mm): 6.35; Depth of Cut (Inch): 1/4; Depth Of Cut: 6.35 mm; Number Of Cut
• Spade Drill Accessories; Type: Torx Hand Driver; Accessory Type: Torx Hand Driver; Drill Diameter Range: 0.5320 - 0.6100; Series: 4
• Threaded Rod: 5/16-18, 6' Long, Stainless Steel, Grade 304 (18-8)
• Plastic Sheet: Polyvinylchloride, 3/16″ Thick, 6″ Long, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.4921; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ball End Mill: 0.50 mm Dia, 0.40 mm LOC, 2 Flute, Solid Carbide
• 5/16″ Screw High-Temperature Flat Washer: Grade A286 Stainless Steel, Plain Finish 3/8″ ID, 7/8″ OD, 0.148″ Thick
• Wire Disconnects; Gender: Female; Insulation Type: Fully Insulated; Insulation Material: Nylon; Connection Type: Crimp; Compatible Wire Size (sq mm): 4.0-6.0; Tab Width (Decimal Inch): 0.25; Tab Width (mm): 6.34 mm; 0.25 in; Color: Yellow; Contact Materia
• Wire Disconnects; Gender: Male; Insulation Type: Fully Insulated; Insulation Material: Nylon; Connection Type: Crimp; Compatible Wire Size (sq mm): 4.0-6.0; Tab Width (Decimal Inch): 0.25; Tab Width (mm): 6.34 mm; 0.25 in; Color: Yellow; Contact Material:
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1320; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standar
• Paper Towels: Perforated Roll, 6 Rolls, Roll, 2 Ply, Recycled Fiber, White 11″ Wide, 135' Roll Length, 810 Sheets
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Push-To-Connect Tube Fitting: Male Branch Tee, 3/8″ OD Polybutylene, 350 psi
• 10″ Screw High-Temperature Flat Washer: Grade A286 Stainless Steel, Plain Finish 7/32″ ID, 1/2″ OD, 0.109″ Thick
• Strip: Buna-N Rubber, 1/4″ Wide, 120″ Long, Black Durometer 50, Plain Backing
• Torque Gages; Capacity: 12 cNm
• Compression Tube Connector: 3/8″ Thread, Compression x MNPT Zinc-Plated Steel
• Spot Welder Tips; Tip Type: Straight Tip C Nose (Flat); Material: RWMA Class 1 - C15000; Type: Straight Tip C Nose (Flat)
• Pipe Fitting: 1/2 x 1/2″ Fitting, 316 Stainless Steel 150 psi
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6837; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Strip: Neoprene Rubber, 1/2″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Pipe Bushing: 3/4 x 1/2″ Fitting, 316 Stainless Steel FNPT x MNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• Tank Flanges; Overall Height (Inch): 27/32
• Clamp Handle Grips; For Use With: Utensils; Small Tools; Gauges; Grip Length: 4.9700; Material: Die Cast Zinc; Length (Decimal Inch): 4.9700; Material: Die Cast Zinc
• Lever Locksets; Lockset Type: Storeroom; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Less Core; Material: Metal; Door Thickness: 1-3/4 to 2; Finish: Satin Stainless Steel
• Disposable Coveralls: Size 5X-Large, 0.4238 oz, Multi-Layer Non-Woven Barrier Laminate Fabric, Double Zipper Closure
• Plastic Bar: Cast Acrylic, 1/4″ Thick, Clear Rockwell M-95
• Plastic Bar: Cast Acrylic, 1/4″ Thick, Clear Rockwell M-95
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/16″ Thick, 6″ Long, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Ironworkers; Throat Depth: 3.75 in; Punching Pressure: 40; Punching Capacity: 3/8 in; Hydraulic Pressure: 3000; Pipe Notching Capacity: 1/4 x 1-3/4 x 2; Pipe Notching Capacity In Schedule 40 Id: 2 in; Shearing Capacity At 45 Degrees: 3 x 3 x 1/4; Shearing
• Plastic Sheet: Garolite, 1/32″ Thick, 6″ Long, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 1.25 in; Material: Bi-Metal; Application: Wood & Nails, Copper Pipe, Wood, PVC, Drywall; Includes: (1) Imp
• Electric Hoist: Pendant Controller, 1 Chain
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 1.125 in; Material: Bi-Metal; Application: Metal (Non-Ferrous), Wood & Nails, Wood, PVC, Drywall; Includes
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 2.5 in; Material: High Carbon Steel; Application: Hardwood, Wood, PVC, and Drywall; Includes: (1) Imperia
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, White Rockwell M-95
• Pipe Bushing: 1 x 3/4″ Fitting, 316 Stainless Steel FNPT x MNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• Cut & Puncture Resistant Sleeves: Size L, Kevlar, Gray, ANSI Cut A4 Knit Wrist Closure, Seamless, Cut-Resistant, Use for Automotive, Automotive Aftermarket, Equipment & Food Processing
• #4-40, 2.4369″ OAL, 1/4″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/4″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade T-3, Uncoated
• M3x0.5 Coarse 10mm Long 6-Lobe Pin Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9849; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0230; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8603; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9053; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8821; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9271; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 4″ Usable Length 5.49″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Strip: Neoprene Rubber, 3/8″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Ball End Mill: 3/16" Dia, 3/16" LOC, 2 Flute, Solid Carbide
• Strip: Buna-N Rubber, 1/2″ Wide, 120″ Long, Black Durometer 50, Plain Backing
• Straight Blade Receptacles; Receptacle Type: Duplex Receptacle; Grade: Specification; NEMA Configuration: 5-20R; Amperage: 20 A; Voltage: 125 V; Wiring Method: Back & Side; Flange Style: No; Number Of Phases: 1; Number Of Wires: 3; Number Of Poles: 2; Mou
• 8.8OZ CAN GAIN AIR FRESHENER Air Freshener
• Miniature Manual Ball Valve: 3/8″ Pipe, Full Port, Brass 2-Way Flow & In-Line, MNPT x FNPT, 600 psi WOG
• Push-To-Connect Tube Fitting: Plug-In Reducer, 3/8″ ID x 1/4″ OD Kynar, 300 psi
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 1-3/4″ Usable Length 3.24″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Manual Hand Chain Hoist 2 Chain
• Threaded Studs; Style: Fully Threaded; System of Measurement: Inch; Thread Size: 5/8-18; 5/8-18 in; Overall Length (Inch): 6; Overall Length (Decimal Inch): 6 in; Overall Length (mm): 6 in; Material: Alloy Steel; Finish/Coating: Black Oxide; Class: 2A; Gr
• 1/8″ Diam 1-5/8″ Flute Length 135° Carbide-Tipped Aircraft Extension Drill Bright/Uncoated, Straight-Cylindrical Shank, Split Point, Self-Centering, Series 129
• Pipe Fitting: 1/8 x 1/8″ Fitting, 304 Stainless Steel 150 psi
• Electric Hoist: Pendant Controller, 1 Chain
• Hex Key: 5 mm Hex, T-Handle Arm 177 mm OAL, 61CrSiV5 Vanadium Steel
• Tap & Drill Sets; Minimum Tap Thread Size (mm): 1/4-20 in; Minimum Tap Thread Size (Inch): 1/4-20 in; Maximum Tap Thread Size (Inch): 1/4-20; Maximum Tap Thread Size: 1/4-20 in; Minimum Drill Size (mm): 5.11; Minimum Drill Size (Letter): #7; 5.11 mm; Mini
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T8; Blade Length (mm): 125.0000; Overall Length (mm): 152.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T8; Handle Type: T-Handle; Additional I
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T5; Blade Length (mm): 125.0000; Overall Length (mm): 152.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T5; Handle Type: T-Handle; Additional I
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 100.00; Maximum Torque (Ft/Lb): 480.00; Overall Length (Decimal Inch): 35.9000; Head Type: Interchageable; Head Shape: R
• Black 45 ° Elbow: 3/8″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Black Tee: 3/8″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Work & General Purpose Gloves; Application: Cold; Men's Size: 8; Lining Material: Thinsulate; Back Material: Cowhide; Cuff Style: Slip-On; Finger Coverage: Full Fingered; Leather Type: Cowhide; Static Dissipative: No; Leather Grade: Industrial; Lint-Free:
• Black Tee: 1/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Pipe 90 ° Street Elbow: 1″ Fitting, 304 Stainless Steel FNPT x MNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• Sheet Gasketing; Width (Inch): 36; Thickness: 1/64; Length (Inch): 36.0000; Color: Green; Material: Plant Fiber with Cork Blend; Length (Inch): 36; Minimum Temperature (F): 0.000; Material: Plant Fiber with Cork Blend; Maximum Temperature (F): 250.000; Co
• Traffic Cone & Barricade Accessories; Type: Base; Width (Decimal Inch): 15.5000; Height (Decimal Inch): 3.000000; Material: Recycled Rubber; Color: Black; Weight (Lb.): 10.0000; For Use With: Plasticade Open Top Delineators & Watchtower Delineators; Addit
• Sign: Rectangle & Square, ″Notice Wash Hands Before Returning To Work. Aviso Lavarse Las Manos Antes De Regresar Al Trabajo″ Vinyl, 14″ High
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2845; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Torque Gages; Capacity: 2.4 ozf-in
• Utility Knives, Snap Blades & Box Cutters; Blade Type: Recessed & Concealed Fixed Blade; Handle Material: Glass Filled Nylon; Blade Material: Carbon Steel; Blade Length (mm): 25.4000; Blade Length (Decimal Inch): 1.0000
• Utility Knives, Snap Blades & Box Cutters; Blade Type: Recessed/Concealed Fixed Blade; Handle Material: Glass-Filled Nylon; Blade Material: Carbon Steel; Blade Length (mm): 25.4000; Blade Length (Decimal Inch): 1.0000
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 100.00; Maximum Torque (Ft/Lb): 480.00; Overall Length (Decimal Inch): 35.0000; Head Type: Interchageable; Head Shape: R
• Straight Blade Plug: Industrial, 1-15P, 125VAC, Black & White Self-Grounded, 15A, Composite Body, 2 Poles, 3 Wires
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7601; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standard
• Deep Groove Ball Bearing: 42 mm OD Bearing Number 6302
• Power & Impact Screwdriver Bits & Holders; Bit Type: Slotted; Hex Size (Inch): 1/4 in; Blade Width (mm): 4.00; Blade Thickness (mm): 0.8000; Drive Size: 1/4 in; Body Diameter (mm): 0.800; Overall Length (Decimal Inch): 1.0000; Number Of Pieces: 1
• Power & Impact Screwdriver Bits & Holders; Bit Type: Slotted; Hex Size (Inch): 1/4 in; Blade Width (mm): 6.50; Blade Thickness (mm): 1.2000; Drive Size: 1/4 in; Body Diameter (mm): 1.200; Overall Length (Decimal Inch): 1.0000; Number Of Pieces: 1
• Magnifying Safety Glasses
• Utility Knives, Snap Blades & Box Cutters; Blade Type: Recessed/Concealed Fixed Blade; Handle Material: Glass-Filled Nylon; Blade Material: Carbon Steel; Blade Length (mm): 9.5300; Blade Length (Decimal Inch): 0.3750
• Deep Groove Ball Bearing: 47 mm OD 1,326 lb Static Load
• Masking Tape: 57″ Wide, 120 yd Long, 5.9 mil Thick, Tan Crepe Paper, Rubber Adhesive, 27 lb/in Tensile Strength
• Deep Groove Ball Bearing: 47 mm OD 1,270 lb Static Load
• Slogging Box End Wrench: 11/16", 12 Point, Single End
• Modular Steel Storage Cabinet: 30″ Wide, 21-13/32″ Deep, 44″ High 440 lb Capacity, 6 Drawer
• Door Closer Accessories; For Use With: Exterior Doors Up To 36″; Interior Doors Up To 48″; Body Length: 20; Finish/Coating: Sprayed Aluminum; For Use With: Exterior Doors Up To 36″; Interior Doors Up To 48″
• 6″ Bore Combination Disconnect/Starter Metal & Plastic, 230V, External Spindle, For MSC #92813351 Knee Milling Machines, Includes Motor Control
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 80, Plain Backing
• Utility Knives, Snap Blades & Box Cutters; Blade Type: Recessed/Hook Blade; Handle Material: Glass Filled Nylon; Blade Material: Carbon Steel; Blade Length (mm): 9.5300; Blade Length (Decimal Inch): 0.3750
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Clear Lenses, Frameless Black Frame, Adjustable
• Manual Hoist 3 Chain
• #4-40, 0.374″ OAL, 1/4″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.187″ Body Length, 3/16″ Thread Length, 1/16″ Thread Depth, Grade 303, Uncoated
• Hard Hat: Class E & G, 4-Point Suspension Orange, Polyethylene, Slotted
• Hard Hat: Class E & G, 4-Point Suspension White, Polyethylene, Slotted
• Semi-Automatic Combo Horizontal & Vertical Bandsaw 1 hp, 230 Volts
• Plastic Bar: Cast Acrylic, 1/8″ Thick, Clear Rockwell M-95
• Indexable Drill Insert: XCNT06EN CTCP435, Carbide 88 ° Square
• Taper Length Drill Bit: 0.0960″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Ball Grip Quick-Release Pin: Ring Handle, 7/16″ Pin Dia, 1/2″ Usable Length 2.08″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Indexable Drill Insert: 01 BK8425, Carbide TiAlN & TiN Finish, Trigon
• Paper Fasteners; Type: Paper Fastener; Length (Inch): 2-3/4
• Indexable Drill Insert: 13 BK79, Carbide TiAlN Finish, 1/4″ Inscribed Circle, Trigon
• Metal Push-To-Connect Tube Fittings; Fitting Type: CONN; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/2″; Tube Outside Diameter: 3/4; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Overall Length
• Metal Push-To-Connect Tube Fittings; Fitting Type: CONN; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/4″; Tube Outside Diameter: 5/8; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Overall Length
• Safety Goggles: Chemical Splash Dust & Particulates, Anti-Fog, Clear Polycarbonate Lenses Indirect Vent, Gray Frame, Size Universal
• Shop Press:
• Rigid & Swivel Caster Wheel: Polyurethane, 5" Dia, 2-1/8" Wide
• Chemical Resistant Gloves: Large, 8 Thick, Polyurethane-Coated, Polyurethane, Unsupported Blue, 10.8'' OAL, Rough, ANSI Cut A1, ANSI Abrasion 4, ANSI Puncture 1
• Chemical Resistant Gloves: X-Large, 8 Thick, Polyurethane-Coated, Polyurethane, Unsupported Blue, 10.8'' OAL, Rough, ANSI Cut A1, ANSI Abrasion 4, ANSI Puncture 1
• Chemical Resistant Gloves: Medium, 8 Thick, Polyurethane-Coated, Polyurethane, Unsupported Blue, 10.8'' OAL, Rough, ANSI Cut A1, ANSI Abrasion 4, ANSI Puncture 1
• Chemical Resistant Gloves: Small, 8 Thick, Polyurethane-Coated, Polyurethane, Unsupported Blue, 10.8'' OAL, Rough, ANSI Cut A1, ANSI Abrasion 4, ANSI Puncture 1
• Chemical Resistant Gloves: 2X-Large, 8 Thick, Polyurethane-Coated, Polyurethane, Unsupported Blue, 10.8'' OAL, Rough, ANSI Cut A1, ANSI Abrasion 4, ANSI Puncture 1
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE BRCH SWV; Connection Type: Push-to-Connect x FNPT; Material: Brass; Thread Size: 1/8″; Tube Outside Diameter: 1/4; Fitting Shape: 90 ™ Elbow; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Stan
• Jig & Flat Feet; Foot Type: Jig; Thread Size: 3/8 in; Height (Inch): 1; Material: Steel; Finish: Black; Finish/Coating: Black; Material: Steel; Thread Size: 3/8 in
• Micro Drill Bit: 0.0203″ Dia, 118 °, Cobalt Bright/Uncoated, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 301
• Rotary Broach Holders; Type: Yes; Adjustable: Yes; Shank Diameter (mm): 1.5; Holder Shank Diameter: 1.5; For Broach Shank (mm): 2.5; Holder Shank Length: 3; Broach Shank Length: 1.75; For Broach Shank Diameter: 2.5
• Cord Detangler: Use with Telephone
• Micro Drill Bit: 0.0167″ Dia, 118 °, Cobalt Bright/Uncoated, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 301
• Extra Length Drill Bit: 0.1063″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Extra Length Drill Bit: 0.1102″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Extra Length Drill Bit: 0.1142″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Rotary Broach Holders; Type: Yes; Adjustable: Yes; Shank Diameter (mm): 1; Holder Shank Diameter: 1; For Broach Shank (mm): 0.75; Holder Shank Length: 3; Broach Shank Length: 2.75; For Broach Shank Diameter: 0.75
• Micro Drill Bit: 0.0313″ Dia, 118 °, Cobalt Bright/Uncoated, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 301
• Threaded Rod Anchor SH-TEK 50 1-5/8″ SWIVEL TEKS 5 FOR STEEL
• Indexable Drill Insert: TCMTHP CA6535, Carbide TiCN, Al2O3 & TiN Finish, 60 °
• Metal Push-To-Connect Tube Fittings; Fitting Type: CONN; Connection Type: Push-to-Connect x FNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 1/2; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Overall Length
• Printer Ribbon: 2.36" Wide, 984' Long, White, Wax & Resin
• Printer Ribbon: 4.33" Wide, 984' Long, White, Wax & Resin
• Steel Storage Cabinet: 48″ Wide, 24″ Deep, 72″ High 6 Shelf
• Threaded Rod Anchor SH-GST/CST 20-SWIVEL FOR WOOD/CONCRETE 3/8 ROD
• Indexable Drill Insert: 13 BK79, Carbide TiAlN Finish, Trigon
• Taper Length Drill Bit: 0.0781″ Dia, 118 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5537
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Correction Fluid & Tape; Type: Correction Tape
• Taper Length Drill Bit: 0.1122″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Pipe, Tube & Conduit Hold-Down Straps; Type: Conduit Clamp; Pipe Size: 1-1/2; Conduit Type: Rigid/IMC; Number of Mounting Holes: 1.0; Material: Malleable Iron; Finish/Coating: Galvanized; Minimum Order Quantity: Malleable Iron; Material: Malleable Iron
• Cooling Headband: Size Universal, Red, White & Blue All American, Cotton
• Micro Drill Bit: 0.0177″ Dia, 130 °, Solid Carbide TiCN Finish, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 302
• Label Maker Label: White, Nylon, 1,500 per Roll
• Indexable Drill Insert: P28428A57 WKP25, Carbide Coated, Square
• Indexable Drill Insert: P28428A57 WKP25, Carbide Coated, Square
• Indexable Drill Insert: P28428A57 WKP25, Carbide Coated, Square
• Ball End Mill: 3.00 mm Dia, 5.00 mm LOC, 2 Flute, Solid Carbide
• Indexable Drill Insert: P28428E67 WKP35S, Carbide Coated, 96 ° Square
• Indexable Drill Insert: P28428A57 WKP25S, Carbide Coated, 96 ° Square
• Taper Length Drill Bit: 0.1142″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Indexable Drill Insert: P28428A57 WKP35S, Carbide Coated, 96 ° Square
• Indexable Drill Insert: P28428E57 WKP35S, Carbide Coated, 96 ° Square
• Metal Push-To-Connect Tube Fittings; Fitting Type: ELBOW; Connection Type: Push-to-Connect x FNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 3/8; Fitting Shape: 90 ™ Elbow; Maximum Working Pressure (Psi
• Personal Insect Repellents; Form: Liquid; Targeted Pest: Mosquitoes; Active Ingredient: Lemon Eucalyptus Oil; Container Size: 6 oz; Container Type: Can; Protection Time: 6; Concentration: 30; Standards: EPA Registered; Container Size: 6 oz; Active Ingredi
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Clear Lenses, Frameless, UV Protection Green Frame
• Taper Length Drill Bit: 0.0394″ Dia, 118 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 317
• Manual Combo Horizontal & Vertical Bandsaw 3 Phase, 0.5 hp, 220 Volts
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Indexable Drill Insert: FBM07G AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBM07G AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBM06DL AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBM06G AH8015, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBM07HF AH8015, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBM06HF AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBM07HF AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBM07HF AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBM07DL AH725, Carbide Coated, 80 ° Parallelogram
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 100.00; Maximum Torque (Ft/Lb): 480.00; Overall Length (Decimal Inch): 35.7000; Head Type: Interchageable; Head Shape: R
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 8.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-use
• Door Closer Accessories; For Use With: LCN 9550 Series Power Operators Senior Swing Door Operator; Body Length: 16.5; Finish/Coating: Aluminum; For Use With: LCN 9550 Series Power Operators Senior Swing Door Operator
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use T
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: SFC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-use
• Utility Knives, Snap Blades & Box Cutters; Blade Type: Recessed/Concealed Fixed Blade; Handle Material: Glass Filled Nylon; Blade Material: Carbon Steel; Blade Length (mm): 9.5300; Blade Length (Decimal Inch): 0.3750
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-use
• Traffic Cone & Barricade Accessories; Type: Base; Width (Decimal Inch): 20.2500; Material: Recycled Rubber; Color: Black; Weight (Lb.): 10.0000; For Use With: 42 in & 28 in Navicade Traffic Channelizing Cone; Watchtower Stacker Cone; Additional Informatio
• Spot Welder Tips; Tip Type: Straight Tip D Nose (Offset); Material: RWMA Class 2 - C18200; Type: Straight Tip D Nose (Offset)
• Power Pallet Truck: 4,400 lb Capacity, 27″ OAW, 27″ Forks 3″ Min Lift Height, 48″ Fork Length x 27″ Fork Width, 27″ Overall Width
• Deep Groove Ball Bearing: 62 mm OD 2,316 lb Static Load
• Penetrant & Lubricant: 20 oz Aerosol Can Light Brown, Flammable
• Impact Socket: 6-Point, 12″ OAL
• Tire Accessories; Type: Emergency Chains; For Tire Size: 255/80R22.5; 12.5x20; 275/75R22.5; 10R22.5; 275/70R22.5; 11R22.5; 275/80R24.5; 295/75R22.5; 11-24.5; 275/80-22.5; 285/75R22.5; 10.00R22; 285/75R24.5; 285/80R24.5; 10.00R20; For Use With: Trucks; Con
• Utility Knives, Snap Blades & Box Cutters; Blade Type: Recessed/Hook Blade; Handle Material: Glass Filled Nylon; Blade Material: Carbon Steel; Blade Length (mm): 9.5300; Blade Length (Decimal Inch): 0.3750
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, Black Durometer 60, Plain Backing
• Cut, Puncture & Abrasive-Resistant Gloves: Size M, ANSI Cut A4, ANSI Puncture 1, Nitrile, HPPE Black, Palm Coated, HPPE Lined, HPPE Back, Nitrile Dipped Grip, ANSI Abrasion 6
• Arc Welding Accessories; Accessory Type: Electrode Holder; For Use With: K3166-1 Hydroguard Rod Canister
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 18' Long x 10' Wide, 5 mil Polyethylene, Rectangle
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 18' Long x 10' Wide, 5 mil Polyethylene, Rectangle
• Torque Wrenches; Wrench Type: Quick Release; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 60.00; Maximum Torque (Ft/Lb): 300.00; Overall Length (Decimal Inch): 25.9000; Head Type: Reversible Ratcheting; Fixed;
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 100.00; Maximum Torque (Ft/Lb): 480.00; Overall Length (Decimal Inch): 33.5000; Head Type: Interchageable; Head Shape: R
• Stainless Steel Pipe Nipple: 1″ Pipe, Grade 316 Welded, Schedule 40
• Stainless Steel Pipe Nipple: 1″ Pipe, Grade 304 Welded, Schedule 40
• #8-32, 0.687″ OAL, 5/16″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 0.312″ Body Length, 3/8″ Thread Length, 3/16″ Thread Depth, Grade T-3, Uncoated
• Hex Nut: 3/8-16, Grade 17-4PH Stainless Steel, Plain Finish Right Hand Thread, 9/16″ Across Flats, 2B
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Vertical Bars; Hand: Non-Handed; Finish/Coating: Stainless Steel; Minimum Door Width: 30; Maximum Door Width: 36.000; Grade: 1; Special Item Information: For use with Metal/Wood Doors
• Hex Key: 3 mm Hex, T-Handle Arm 152 mm OAL, 61CrSiV5 Vanadium Steel
• Soldering Iron Tips; Type: Chisel Tip; Chisel; Tip Point Width: 0.2 in; For Use With: FM-203;FM-204;FM-205;FM-951 & FM-206 Stations; Tip Material: Copper; Tip Diameter: 4.000; Series: T15; For Use With: FM-203;FM-204;FM-205;FM-951 & FM-206 Stations; Tip T
• Flange Gasketing; Nominal Pipe Size: 3; Inside Diameter (Inch): 3-1/2; Thickness: 1/16; Outside Diameter (Inch): 7-1/2; Material: Silicone Rubber; Color: Red; Suggested Bolt Size: 5/8; Maximum Temperature (F): 500.000; Maximum Pressure (psi): 150.00; Mini
• Taper Length Drill Bit: 0.0394″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Black Tee: 3/8 x 1/4 x 1/4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Standard Straight Line Action Clamp: 600 lb Load Capacity, 1.252″ Plunger Travel, Flanged Base, Steel 4 Mounting Hole, 0.22″ Hole, 0.433″ Plunger Dia, Straight Handle
• Kyocera MFAH 125RA16T254SF Inch Bore Diameter, Standard Pitch, 16 Flute, 90 Degree Face Mill with a 125.00mm Cutting Diameter for Aluminum Facing, Finishing Applications
• Anvils For Indexables; Insert Inscribed Circle (Inch): 0.5551; Insert Inscribed Circle: 0.5551 in; Helix Angle: 0; 0 ™; Anvil Orientation: Right Hand; Toolholder Insert Dimension: R217; R220.29I; R217;R220.29I; Insert Inscribed Circle (Decimal Inch): 0.5
• Black Tee: 1-1/2 x 1-1/2 x 1″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Gray Lenses, Frameless, UV Protection Charcoal Frame, Single
• Sheet: Neoprene Rubber, 12″ Wide, 12″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Water Dispensers; Type: Cleaning Kit, Standard; Style: All Inclusive; Wattage: 0; Voltage: 0; Voltage: 0; Style: All Inclusive; Type: Cleaning Kit, Standard; Style: All Inclusive; Spout Type: None; Handle Type: No Handle; Wattage: 0; Design: Assembled Pac
• Hex Head Cap Screw: 1-8 x 2-1/2″, Grade L9 Steel, Zinc Yellow Dichromate Finish Fully Threaded
• Impact Socket: 6-Point
• Knob Locksets; Type: Entrance; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Bronze; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.75; Lockset Grade: Grade 2
• Garden Hose Spray Nozzles; Type: Watering Wand; Style: Front Trigger; Material: Plastic; Metal; Color: Assorted; Thread Size (Inch): 3/4; Description: Watering Wand; Description: Watering Wand
• Sheet: SBR Rubber, 12″ Wide, 36″ Long, Red Durometer 60, Plain Backing
• Black 90 ° Elbow: 1-1/2 x 1″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Dish Detergent; Form: Liquid; Container Type: Gelpac; Container Size (Lb.): 1.42; Scent: Orange; For Use With: Dish Detergent
• Plastic Bar: Polycarbonate, 1/4″ Thick, Clear
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Plastic Sheet: Garolite, 1/2″ Thick, 6″ Long, Brown, 16,000 psi Tensile Strength Rockwell M-100
• Indexable Square-Shoulder Face Mill: 10S100ZU4AP303Z40R48, 3.0338″ Max Cutting Depth Uses 40, SNHJ100464SNGDH & SNHJ100408SNGDH Inserts, Through Coolant, Series HARVI Ultra 8X
• Rotary Broach Holders; Type: Yes; Adjustable: Yes; Shank Diameter (mm): 1.50; Holder Shank Diameter: 1.50; For Broach Shank (mm): 0.75; Holder Shank Length: 3; Broach Shank Length: 2.75; For Broach Shank Diameter: 0.75
• Knob Locksets; Type: Privacy; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.75; Lockset Grade: Grade 2
• Handlesets; Type: Trim; Door Thickness: 1-3/4
• Power Pallet Truck: 4,400 lb Capacity, 21″ OAW, 21″ Forks 3″ Min Lift Height, 48″ Fork Length x 21″ Fork Width, 21″ Overall Width
• Manual Hand Chain Hoist 1 Chain
• Plastic Sheet: Polycarbonate, 3/8″ Thick, Clear Rockwell R-120
• Door Closer Accessories; For Use With: LCN 4630 Series Power Operators Auto-Equalizer Door Closer; Body Length: 18.25; Finish/Coating: Sprayed Aluminum; For Use With: LCN 4630 Series Power Operators Auto-Equalizer Door Closer
• Welding/Heat Protective Glove GAUNTLET CUFF LG 1/PR HOT MILL GLOVES
• Pipe Fitting: 1/4 x 1/8″ Fitting, 304 Stainless Steel 6,200 psi
• Magnifying Safety Glasses
• Strip: Neoprene Rubber, 1/2″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Polyurethane Tube: 1/4″ ID x 3/8″ OD, 5' Long 200 Max psi, Clear
• All-Purpose Cleaner: 20 gal Can, Disinfectant Aerosol, Citrus Scent
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/8″ Thick, White
• Plasma Cutter Cutting Tips, Electrodes, Shield Cups, Nozzles & Accessories 27AMP ELECTRODE REPLACEMENT PART
• Plastic Sheet: Polycarbonate, 3/16″ Thick, Clear, 9,000 psi Tensile Strength Rockwell R-120
• Vertical Bars; Hand: Non-Handed; Finish/Coating: Stainless Steel; Minimum Door Width: 30; Maximum Door Width: 36.000; Grade: 1; Special Item Information: For use with Metal/Wood Doors