Products

• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.817″ ID, 1.242″ OD, 0.016″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.671″ ID, 3/4″ OD, 0.02″ Thick
• Care Instructions Label: ″Do Not Stack″, Rectangle, 3″ Wide, 4″ High Paper
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 1.065″ ID, 1.469″ OD, 0.025″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.63″ ID, 0.884″ OD, 0.057″ Thick
• Linear Motion Systems; Type: Guide Rail; Overall Width (mm): 30.0000; Overall Length (mm): 800.0000; Bolt Hole Spacing: 50.0000; Height (mm): 18.3000; Rail Bolt Hole Size: 16.00
• 7/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.879″ ID, 1.436″ OD, 0.031″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.753″ ID, 0.997″ OD, 0.06″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.792″ ID, 1-3/8″ OD, 0.027″ Thick
• Retention Knob: CAT40, 5/8-11 Thread, 15 ° Angle Radius, 0.75″ Knob Dia 2.01″ Knob to Flange, 0.55″ Pilot Dia, 2.01″ OAL
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.679″ ID, 0.999″ OD, 0.034″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 1.028″ ID, 1.5″ OD, 0.017″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.645″ ID, 0.808″ OD, 0.032″ Thick
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Retention Knob: CAT40, 5/8-11 Thread, 45 ° Angle Radius, 0.59″ Knob Dia 2.25″ Knob to Flange, 0.39″ Pilot Dia, 2.25″ OAL
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.629″ ID, 1.02″ OD, 0.026″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.639″ ID, 0.998″ OD, 0.026″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 1.004″ ID, 1.235″ OD, 0.007″ Thick
• Retention Knob: CAT40, 5/8-11 Thread, 45 ° Angle Radius, 0.74″ Knob Dia 0.64″ Knob to Flange, 0.49″ Pilot Dia, 1.62″ OAL
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.629″ ID, 0.97″ OD, 0.03″ Thick
• 1″ Screw Standard Flat Washer: Steel, Plain Finish 1.066″ ID, 1.414″ OD, 0.025″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.581″ ID, 0.814″ OD, 0.055″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.597″ ID, 0.906″ OD, 0.021″ Thick
• Hex Head Cap Screw: 9/16-12 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 1.001″ ID, 1.129″ OD, 0.027″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.963″ ID, 1.247″ OD, 0.011″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.752″ ID, 0.998″ OD, 0.011″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.769″ ID, 1.495″ OD, 0.012″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.67″ ID, 0.812″ OD, 0.02″ Thick
• Classroom Intruder Lever Lockset for 1-3/4″ Thick Doors 6 or 7 Pin Best & Compatible, 2-3/4″ Backset, Satin Chrome\xB6Antimicrobial Coated Finish
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.628″ ID, 1.249″ OD, 0.022″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.628″ ID, 0.999″ OD, 0.058″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.659″ ID, 1.162″ OD, 0.025″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.628″ ID, 0.859″ OD, 0.057″ Thick
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Classroom Intruder Lever Lockset for 1-3/4″ Thick Doors 6 or 7 Pin Best & Compatible, 2-3/4″ Backset, Satin Chrome\xB6Antimicrobial Coated Finish
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.844″ ID, 1.378″ OD, 0.02″ Thick
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.812″ ID, 0.998″ OD, 0.052″ Thick
• Hex Head Cap Screw: 3/8-16 x 1-1/4″, Grade A-286 Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.672″ ID, 0.975″ OD, 0.044″ Thick
• Plastic Bar: Garolite, 1/2″ Thick, Brown Rockwell M-100
• Hex Head Cap Screw: 5/16-18 x 1-1/2″, Grade A-286 Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.636″ ID, 7/8″ OD, 0.041″ Thick
• Blind Rivets
• Hand Hex & Torx Bit Sockets; Socket Type: Torx Bit Socket; Drive Size (Fractional Inch): 1/2; Torx Size: T70
• Tool Bit Blank: 5/32″ Width, 1/2″ OAL, C6, Solid Carbide, Triangular Ground
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.656″ ID, 7/8″ OD, 0.057″ Thick
• Grooving Insert: C2I K2 TF, 1145, Carbide
• M5x0.8, 17.53mm OAL, 8mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 8mm Body Length, 9.53mm Thread Length, 4.1mm Thread Depth, Grade T-3, Uncoated
• Fluorescent Orange 7.0000Lb,
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.571″ ID, 0.974″ OD, 0.054″ Thick
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, White Durometer 50, Acrylic Adhesive Backing
• #8 Screw 1-5/16″ OAL 0.166″ ID x 5/16″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.565″ ID, 0.943″ OD, 0.03″ Thick
• #6 Screw 3/32″ OAL 0.14″ ID x 1/4″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.69″ ID, 0.936″ OD, 0.026″ Thick
• Grooving Tool: Internal Solid Carbide
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.629″ ID, 0.746″ OD, 0.007″ Thick
• Ring Pipe Thread Gages; Thread Size: 2-11-1/2; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 2.2944-2.2882; Set: 2 Pc.; Specification Met: ANS
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.66″ ID, 0.871″ OD, 0.055″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.643″ ID, 0.805″ OD, 0.055″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.673″ ID, 0.844″ OD, 0.027″ Thick
• Tool Presetter Accessories; Type: TFT Screen; For Use With: HAIMER Tool Dynamic Balancing Machine
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.719″ ID, 1″ OD, 0.056″ Thick
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.672″ ID, 0.966″ OD, 0.036″ Thick
• Cable Tie: 75″ Long, Black, Reusable 100 lb Tensile Strength, 3/4″ Bundle Dia
• Portable Hydraulic Cylinders; Actuation: Single Acting; Load Capacity: 158; Stroke Length: 11.81; Oil Capacity: 368.09; Cylinder Bore Diameter (Decimal Inch): 6.30; Cylinder Effective Area: 1; Lowered Height: 16.93
• Linear Motion Systems; Type: Linear Guide; Linear Motion Type: Linear Guide; Thread Size: M6 x 1; Overall Width (Decimal Inch): 1.4500; Overall Length (mm): 11.1000; Thread Size: M6 x 1
• Taper Length Drill Bit: 0.1562″ Dia, 130 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 668
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.658″ ID, 0.997″ OD, 0.03″ Thick
• Visor Caddies; Fits Vehicle Make: All Makes & Models; Color: Blue
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.641″ ID, 0.938″ OD, 0.046″ Thick
• Visor Caddies; Fits Vehicle Make: All Makes & Models; Color: Black
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2211; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.65″ ID, 0.752″ OD, 0.008″ Thick
• TIG Torch Parts & Accessories; Type: Gas Hose; Hose Type: Gas; Length (Feet): 12-1/2; For Use With: For All Models; For Use With: For All Models; PSC Code: 3438; For Use With: For All Models; Type: Gas Hose
• Electromagnet Lock Accessories; Type: Wireless Pushplate; For Use With: Touchless Actuators; Material: Stainless Steel; Material: Stainless Steel; For Use With: Touchless Actuators; Type: Wireless Pushplate; Accessory Type: Wireless Pushplate; Type: Wirel
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.769″ ID, 0.999″ OD, 0.026″ Thick
• Brass & Chrome Pipe Fittings; Fitting Type: Reducer Bushing Male to Female; Fitting Size: 1 x 1/4; End Connections: MNPT x FNPT; Material Grade: CA360; Connection Type: Threaded; Pressure Rating (psi): 1000; Fitting Shape: Straight; Thread Standard: NPTF
• Plastic Sheet: Acetal, 3/4″ Thick, 6″ Long, Black, 8,500 psi Tensile Strength Rockwell M-90
• Electromagnet Lock Accessories; Type: Wireless Pushplate Kit; For Use With: Touchless Actuators; Material: Stainless Steel; Material: Stainless Steel; For Use With: Touchless Actuators; Type: Wireless Pushplate Kit; Accessory Type: Wireless Pushplate Kit;
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.603″ ID, 3/4″ OD, 0.021″ Thick
• 3/4-10 12″ OAL Equal Double Threaded Stud Alloy Steel, 2″ Equal Thread Length
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.636″ ID, 0.751″ OD, 0.031″ Thick
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Gray Lenses, Frameless, UV Protection Charcoal Frame, Single, Adjustable
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.677″ ID, 0.864″ OD, 0.036″ Thick
• Accident Prevention Label: ″This End Up″, Rectangle, 2″ Wide, 3″ High Paper
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.815″ ID, 0.997″ OD, 0.026″ Thick
• Stationary Work Bench: 24″ Wide, 72″ Deep, 30″ High
• Press Fit Headless Drill Bushing: HM, 5″ ID Steel
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.853″ ID, 0.927″ OD, 0.025″ Thick
• Stationary Work Bench: 24″ Wide, 72″ Deep, 37″ High
• Press Fit Headless Drill Bushing: HM, 4.8″ ID Steel
• Combination Wrench: 3/8" Head Size, 15 deg Offset
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.691″ ID, 0.873″ OD, 0.051″ Thick
• Press Fit Headless Drill Bushing: HM, 4.7″ ID Steel
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.592″ ID, 0.845″ OD, 0.043″ Thick
• Vibration Isolators; Isolator Type: Plate/Stud; Insert Material: Stainless Steel; Isolator Material: Natural Rubber; Maximum Load Capacity: 3410.00 N; Top Diameter: 60.00; Bottom Diameter: 60; Thread Size: M10x1.5; Overall Width: 60 mm
• Wall Calendar: 13 Sheets, Planner Ruled Blue & Gray Cover
• Press Fit Headless Drill Bushing: HM, 3.8″ ID Steel
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.6″ ID, 0.871″ OD, 0.007″ Thick
• Toilet, Urinal, Blocks & Screens; Deodorizer Type: Urinal Block; Scent: Cherry; Contains Paradichlorobenzene: No
• Panel Meters; Panel Meter Type: Panel Meter; Power Measurement Type: AC Ammeter, Frequency Meter, DC Ammeter, AC Voltmeter, DC Voltmeter; Panel Meter Display Type: Digital LCD; Maximum Input Voltage: 600; Maximum Input AC Amperage: 5; Maximum Input DC Amp
• Press Fit Headless Drill Bushing: HM, 3.5″ ID Steel
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.751″ ID, 0.999″ OD, 0.026″ Thick
• Press Fit Headless Drill Bushing: HM, 7.5″ ID Steel
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.689″ ID, 0.947″ OD, 0.028″ Thick
• Traffic Barrels, Delineators & Posts; Type: Channelizing Cone; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Height (Inch): 50.4; Width (Inch): 7-3/4; Additional Information: Sheeting Grade: Engineer; Series: 650R1; Dimensions: 42 in Without
• Press Fit Headless Drill Bushing: HM, 7.3″ ID Steel
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.628″ ID, 0.869″ OD, 0.007″ Thick
• Thread Repair Kits; Kit Type: Thread Repair; Insert Thread Size (mm): M22x2.5; Includes Drill: No; Includes Tap: Yes; Includes Installation Tool: Yes; Includes Tang Removal Tool: No; Insert Length (mm): 44.00
• Press Fit Headless Drill Bushing: HM, 7.2″ ID Steel
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.775″ ID, 0.989″ OD, 0.025″ Thick
• Thread Repair Kits; Kit Type: Thread Repair; Insert Thread Size (mm): M24x3; Includes Drill: No; Includes Tap: Yes; Includes Installation Tool: Yes; Includes Tang Removal Tool: No; Insert Length (mm): 24.00
• Flap Disc: 60 Grit, Zirconia Alumina, Compact Coated, Plastic-Backed, 10,000 RPM
• Press Fit Headless Drill Bushing: HM, 5.75″ ID Steel
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.659″ ID, 1″ OD, 0.03″ Thick
• Thread Repair Kits; Kit Type: Thread Repair; Insert Thread Size (mm): M22x2.5; Includes Drill: No; Includes Tap: Yes; Includes Installation Tool: Yes; Includes Tang Removal Tool: No; Insert Length (mm): 22.00
• Press Fit Headless Drill Bushing: HM, 5.6″ ID Steel
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.635″ ID, 0.774″ OD, 0.012″ Thick
• Cut-Off Inserts; Insert Style: RSC; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.634″ ID, 0.936″ OD, 0.029″ Thick
• Hook & Loop Disc: 5" Dia, Non-Woven, Aluminum Oxide
• Electronic Label Makers RHINO5200&1/4″WHT 20PK DYMO LABEL PRINTER&TAPE
• Cut-Off Inserts; Insert Style: RSC; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.628″ ID, 0.876″ OD, 0.026″ Thick
• Trim; Trim Type: Aluminum Door Trim; For Use With: 4560/4565 Deadlatch Handle; Material: Metal; For Door Thickness: 2.5; Fire Rated: No; Overall Length: 5.00; Overall Width: 5
• Cut-Off Inserts; Insert Style: RSC; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.816″ ID, 0.976″ OD, 0.009″ Thick
• 5" Diam x 1" Wide x 5-11/16" OAH Stem Mount Swivel Caster
• Pens & Pencils; Type: Mechanical Drafting Pencil; Tip Type: Fine Point; Color: Black
• Cut-Off Inserts; Insert Style: RSJ; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.636″ ID, 0.862″ OD, 0.044″ Thick
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3997; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Pens & Pencils; Type: Mechanical Drafting Pencil; Tip Type: Fine Point; Color: Black
• Cut-Off Inserts; Insert Style: RSJ; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• 3/4″ Screw Standard Flat Washer: Steel, Plain Finish 0.652″ ID, 0.856″ OD, 0.027″ Thick
• Deep Socket Hand Socket: 3/8" Drive, 3/8" Socket, 6-Point
• Cut-Off Inserts; Insert Style: RSJ; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• 9/16″ Screw Standard Flat Washer: Steel, Plain Finish 0.633″ ID, 1″ OD, 0.03″ Thick
• Traffic Barrels, Delineators & Posts; Type: Channelizing Cone; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Height (Inch): 50.4; Width (Inch): 7-3/4; Additional Information: Sheeting Grade: Engineer; Series: 650R1; Stripe Color: White; Dimen
• Back Supports; Support Type: Back Support; Belt Closure Type: Hook & Loop; Belt Material: Nylon; Size: Universal; Fits Maximum Waist Size (Inch): 48; Fits Minimum Waist Size (Inch): 32; Color: black; Maximum Waist Size: 48; Minimum Waist Size: 32; Closure
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.633″ ID, 0.883″ OD, 0.069″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.661″ ID, 0.948″ OD, 0.027″ Thick
• Micro Drill Bit: 0.0469″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Grooving Insert: A4G 4 GUP, KCU10B, Carbide
• Micro Drill Bit: 0.037″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Micro Drill Bit: 0.0323″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Corner Radius End Mill: 0.9843″ Dia, 2 Flutes, Solid Carbide 25 ° Helix, DLC Coated, Centercutting End, Series 2963
• M24x3.00, 49mm Flange Diam, 32mm High, 36mm Across Flats, Flange Nut Grade 12L14 Steel, Black Oxide Finish, 7″ Flange Height, TCMAI
• Corner Radius End Mill: 0.9843″ Dia, 2 Flutes, Solid Carbide 25 ° Helix, DLC Coated, Centercutting End, Series 2963
• Locker:
• Strip: Silicone Rubber, 1″ Wide, 120″ Long, Red Durometer 60, Plain Backing
• Corner Radius End Mill: 0.9843″ Dia, 2 Flutes, Solid Carbide 25 ° Helix, DLC Coated, Centercutting End, Series 2963
• 1/16″ Bundle Diam, 0.096″ Hole, Nylon Clamp White
• Paint Powder Coatings
• Welding Gloves: Size Large, Uncoated, TIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• Locker:
• Classroom Intruder Lever Lockset for 1-3/4″ Thick Doors 6 or 7 Pin Best & Compatible, 2-3/4″ Backset, Satin Chrome\xB6Antimicrobial Coated Finish
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• Welding Gloves: Size Medium, Uncoated, TIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• Classroom Intruder Lever Lockset for 1-3/4″ Thick Doors 6 or 7 Pin Best & Compatible, 2-3/4″ Backset, Satin Chrome\xB6Antimicrobial Coated Finish
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• 6PC 60-12000 W/CASE PRTBL STROBOSCOPE KIT Portable Stroboscope in Carrying Case
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• Locker:
• Welding Gloves: Size Small, Uncoated, TIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• Jobber Length Drill Bit: 45 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Welding Gloves: Size X-Large, Uncoated, TIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• 9-3/8" Long x 5-1/8" Wide x 3-1/4" Deep Laboratory Tray
• Jobber Length Drill Bit: 45 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Locker:
• Locker:
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Locker:
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Mobile Work Center: 48″ OAD, 29″ OAH 300 lb Capacity, Medium Density Fibreboard & High Pressure Laminate Top, Gray Nebula
• Welded Bandsaw Blade: 10' 5″ Long, 1/2″ Wide, 0.025″ Thick, 3 TPI Carbon Steel, Toothed Edge
• Locker:
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• Vibration Isolators; Isolator Type: Plate/Plate; Insert Material: Stainless Steel; Isolator Material: Natural Rubber; Maximum Load Capacity: 2520.00 N; Top Diameter: 50.00; Bottom Diameter: 50; Thread Size: M10x1.5; Overall Width: 50 mm
• Indexable Broaching Accessories; Accessory Type: Ball-Bearing Point Set Screw; For Use With: Lathe Without Y-Axis; Additional Information: M8X1.25
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Profiling Insert: N123J1 S205, Solid Carbide 0.1181″ Corner Radius, Series CoroCut 1-2
• Indexable Broaching Accessories; Accessory Type: Ball-Bearing Point Set Screw; For Use With: Lathe Without Y-Axis; Additional Information: 3/8-16X5/8
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Sheet Roll: Buna-N Rubber, 36" Wide, Black
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-use
• Welded Bandsaw Blade: 7' 9″ Long, 3/4″ Wide, 0.032″ Thick, 14 TPI Carbon Steel, Toothed Edge
• Locker:
• Plastic Bar: Acetal, 1/8″ Thick, Black Rockwell M-90
• Locker:
• Mobile Battery Lift Table: 800 lb Capacity, 15-1/2 to 50-3/4″ Lift Height, 20″ Platform Width, 35-1/2″ Platform Length 15-1/2″ to 50-3/4″ Lift Height, 35-1/2″ Platform Length x 20″ Platform Width
• Plastic Bar: Acetal, 1/8″ Thick, White
• Welded Bandsaw Blade: 7' 9″ Long, 3/4″ Wide, 0.032″ Thick, 10 TPI Carbon Steel, Toothed Edge
• V Belt: Section 5L, 17 mm Belt Width 14 mm Pitch, 100 Teeth, Urethane, Black, 14MGT-1400-20 Belt Number
• Taper Length Drill Bit: 0.0820″ Dia, 118 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5537
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE BRCH SWV; Connection Type: Push-to-Connect x FNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 1/4; Fitting Shape: Tee; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards:
• Taper Length Drill Bit: 0.0709″ Dia, 118 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 317
• Disposable Gloves: Size Large, Latex Natural, 7″ Length, FDA Approved
• Label Maker Label: White, Polyester, 1-1/4" OAW, 10,000 per Roll
• Electric Strikes; Length (Inch): 9 in; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Overall Length: 9 in; Finish: Stainless Steel
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.194″ ID, 0.492″ OD, 0.018″ Thick
• #6-32, 0.687″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.437″ Body Length, 1/4″ Thread Length, 1/4″ Thread Depth, Grade 303, Uncoated
• Cut-Off Wheel: Type 27, 5″ Dia, Ceramic Reinforced, 46 Grit, 12250 Max RPM, Use with Angle Grinders
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.162″ ID, 0.38″ OD, 0.024″ Thick
• Cut-Off Wheel: Type 27, 5″ Dia, Ceramic Reinforced, 36 Grit, 12250 Max RPM, Use with Angle Grinders
• #6-32, 0.437″ OAL, 3/16″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 0.187″ Body Length, 1/4″ Thread Length, 1/16″ Thread Depth, Grade 6/6, Uncoated
• 4″ Screw Standard Flat Washer: Steel, Plain Finish 0.127″ ID, 1/4″ OD, 0.042″ Thick
• Fluorescent Orange 3.0000Lb,
• #6-32, 2-1/2″ OAL, 1/4″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/4″ Body Length, 1/4″ Thread Length, 3/8″ Thread Depth, Grade 12L14, Zinc-Plated
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.192″ ID, 0.394″ OD, 0.035″ Thick
• Pipe, Tube & Conduit Hold-Down Straps; Type: Conduit Clamp; Pipe Size: 2; Conduit Type: Rigid/IMC; Number of Mounting Holes: 2; Material: Malleable Iron; Finish/Coating: Galvanized; Minimum Order Quantity: Malleable Iron; Material: Malleable Iron
• #8-32, 1-1/4″ OAL, 3/8″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 7/8″ Body Length, 3/8″ Thread Length, 7/16″ Thread Depth, Grade 360, Zinc-Plated
• 4″ Screw Standard Flat Washer: Steel, Plain Finish 0.127″ ID, 0.747″ OD, 0.056″ Thick
• Corner Chamfer End Mill: 18.00 mm Dia, 32.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.171″ ID, 0.369″ OD, 0.042″ Thick
• Abrasive Belt: 3-1/2″ Width, 80 Grit, Ceramic Oxide Coated
• 1/4″ Screw 9/16″ OAL 0.252″ ID x 5/8″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.155″ ID, 0.311″ OD, 0.027″ Thick
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE BRCH SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/2″; Tube Outside Diameter: 5/8; Fitting Shape: Tee; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards:
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.176″ ID, 0.379″ OD, 0.028″ Thick
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Presser Replacement Jaws; Type: Standard Jaw; Jaw Size Range: 1/4" to 7/8"; For Use With: CT-400, 320-E, RP 330-B, RP 330-C, RP 340, RP 342 XL, RP 350 or RP 351 Standard Series Pressing Tool; Maximum Pipe Capacity (Inch): 3/4
• 4″ Screw Standard Flat Washer: Steel, Plain Finish 0.128″ ID, 0.31″ OD, 0.007″ Thick
• 150 Grit Silicon Carbide Square Polishing Stone Very Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2726; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.159″ ID, 3/8″ OD, 0.057″ Thick
• 220 Grit Silicon Carbide Square Polishing Stone Very Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.162″ ID, 0.262″ OD, 0.012″ Thick
• 900 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 5/32″ Wide x 4″ Long x 5/32″ Thick
• 3″ Screw Standard Flat Washer: Steel, Plain Finish 0.102″ ID, 0.56″ OD, 0.021″ Thick
• Hex Socket Cap Screw: 5/8-11 Thread, 1-1/4" Length Under Head, Stainless Steel, Bright/Uncoated Finish
• 800 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 5/32″ Wide x 4″ Long x 5/32″ Thick
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.167″ ID, 0.437″ OD, 0.012″ Thick
• 3/8″ Screw Standard Flat Washer: Copper, Uncoated 0.41″ ID, 0.748″ OD, 0.057″ Thick
• 150 Grit Aluminum Oxide Rectangular Polishing Stone Very Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• Masking Tape: 36 mm Wide, 55 m Long, 7.3 mil Thick, Purple Crepe Paper, Rubber Adhesive, 26 lb/in Tensile Strength
• 4″ Screw Standard Flat Washer: Steel, Plain Finish 0.128″ ID, 0.271″ OD, 0.027″ Thick
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.166″ ID, 0.309″ OD, 0.012″ Thick
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 20' Long x 10' Wide, 5 mil Polyethylene, Rectangle
• 220 Grit Aluminum Oxide Rectangular Polishing Stone Very Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick