Products

• Fall Protection Harnesses: 400 Lb, Vest Style, Size Standard, Polyester Pass-Through Leg Strap, Friction Shoulder Strap, Quick-Connect Chest Strap
• Sign Posts & Traffic Sign Accessories; Type: Compact Single Spring Sign Stand; Sign Post/Stand Height (Feet): 4; Sign Height Compatibility (Inch): 48; Sign Width Compatibility (Inch): 48; Material: Aluminum; For Use With: Roll-Up Signs; Includes: Automoti
• Indexable Grooving Toolholder: CTIL20-4T04-D20, 0.1570″ Max Depth, Uses 4 Inserts, 1.1020″ Shank Height, Through Coolant
• Pipe Expansion Joint Control Rod Sets; Pipe Size: 4; Length (Inch): 16-1/4; For Use With: Mason ™-Expansion Joints; Contents: (2) Control Rods; Oversized Steel Washer; (8) Nuts; 1/2″ Thick Neoprene Washers; (4) Gussets; Maximum Working Pressure (psi): 250
• Indexable Grooving Toolholder: CTIR20-6T04-D20, 0.1570″ Max Depth, Uses 6 Inserts, 1.1020″ Shank Height, Through Coolant
• 1/2″ Screw 2-3/4″ OAL 0.505″ ID x 1″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Roll: Silicone Rubber, 36″ Wide, White Durometer 50, Plain Backing
• 1/4″ Screw 1″ OAL 0.252″ ID x 5/8″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DC..32.5.; Toolholder Style: SDJCR; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Width (mm): 16.00;
• Blind Rivets; Rivet Type: Open End; Head Type: Countersunk; Head Diameter: 0.3450 in; Size Code: 66; Minimum Grip: 0.251 in; Rivet Material: Aluminum; Mandrel Material: Aluminum; Maximum Grip: 0.375 in; Minimum Grip (Decimal Inch): 0.2510; Minimum Hole Di
• Triangle & Triangle, Type 2 Web Sling: 10' Long, 2" Wide, 6400 lb Vertical Capacity, Nylon
• 50,000 BTU Diesel/Kerosene/JP-8/Jet A Forced Air Heater with Thermostat 1,200 Sq Ft Max Heating Area, 5 Gal Fuel Capacity, 175 CFM, 11.69″ Wide x 32.01″ Long x 16.69″ High
• Indexable Drill Insert: TOGT13G IC908, Carbide Coated, 60 ° Triangle
• Collet Tool Holders; Collet Series: ER20; Overall Length: 1.40; Material: Steel
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Indexable Drill Insert: TOGT13DT IC908, Carbide Coated, 60 ° Triangle
• Indexable Cutoff Toolholder: 1/2″ Max Depth of Cut, 1″ Max Workpiece Dia, Right Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses GCMN Inserts, Series GND
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.00; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15; Functional Length (mm): 5.19; Pri
• Indexable Insert Drills; Drill Style: DRM; Maximum Drill Diameter (Inch): 5/8; Maximum Drill Diameter (Decimal Inch): 0.6250; Maximum Drill Depth (Decimal Inch): 0.6300; Shank Type: Flatted; Shank Diameter (Decimal Inch): 0.7600; Number of Drill Inserts:
• Twisted Eye & Eye, Type 4 Web Sling: 20' Long, 3" Wide, 9300 lb Vertical Capacity, Polyester
• Attached Eye Cargo Basket, Type 9 Web Sling: 14' Long, 8" Wide, Polyester
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.60; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15.5; Functional Length (mm): 5.19; P
• Continuous Eye Cargo Basket, Type 8 Web Sling: 8' Long, 8" Wide, Nylon
• Masking Tape: 60 yd Long, 5.1 mil Thick, Green Polypropylene, Rubber Adhesive, 21 lb/in Tensile Strength
• Sheet: Natural Rubber, 36″ Wide, 36″ Long, Tan Durometer 40, Acrylic Adhesive Backing
• Modular Reamer Heads; Head Diameter (Inch): 17.0000; Head Diameter (mm): 17.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 10.60 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Thread Forming Tap: 1/4-19, DIN 2189, Normal Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Modular Reamer Heads; Head Diameter (Inch): 20.0000; Head Diameter (mm): 20.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 10.60 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Indexable Cutoff Toolholder: 12 mm Max Depth of Cut, 24 mm Max Workpiece Dia, Left Hand 12 mm Shank Height, 12 mm Shank Width, Uses GCMN Inserts, Series GND
• Anchors, Grips & Straps; Type: Anchor; Product Type: CB-1-W Weld-on Anchor; Material: Steel; Temporary or Permanent: Permanent; Sling Connection Type: D-Ring; Material: Steel; Connection Type: D-Ring; Temporary/Permanent: Permanent; Standards: OSHA 1926 S
• Modular Reamer Heads; Head Diameter (Inch): 18.0000; Head Diameter (mm): 18.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 10.60 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Air Cleaner & Filter Accessories; Accessory Type: Replacement HEPA Filter; Type: Replacement HEPA Filter; For Use With: Beyond Guardian Air Purifier; For Use With: Beyond Guardian Air Purifier; Length (Inch): 11; Width (Inch): 4; Overall Depth: 22 in; Ove
• Indexable Cutoff Toolholder: 12 mm Max Depth of Cut, 24 mm Max Workpiece Dia, Right Hand 12 mm Shank Height, 12 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Reamer Heads; Head Diameter (Inch): 0.7500; Head Diameter (mm): 0.7500; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 0.4170 in; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Hand
• Indexable Cutoff Toolholder: 12 mm Max Depth of Cut, 24 mm Max Workpiece Dia, Left Hand 12 mm Shank Height, 12 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 12 mm Max Depth of Cut, 24 mm Max Workpiece Dia, Right Hand 12 mm Shank Height, 12 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Reamer Heads; Head Diameter (Inch): 19.0000; Head Diameter (mm): 19.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 10.60 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Indexable Cutoff Toolholder: 1/2″ Max Depth of Cut, 1″ Max Workpiece Dia, Left Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses GCMN Inserts, Series GND
• Indexable Grooving Toolholder: TTFIR25.4-3T12 33-48, 0.0870″ Max Groove Width 0.4720″ Max Depth, Uses TDX 3, SC*T 3 & TSL 3 Inserts, Through Coolant
• Indexable Cutoff Toolholder: 1/2″ Max Depth of Cut, 1″ Max Workpiece Dia, Left Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses GCMN Inserts, Series GND
• Indexable Grooving Toolholder: TTFIL25.4-3T12 33-48, 0.0870″ Max Groove Width 0.4720″ Max Depth, Uses TDX 3, SC*T 3 & TSL 3 Inserts, Through Coolant
• Indexable Cutoff Toolholder: 0.47″ Max Depth of Cut, 0.94″ Max Workpiece Dia, Left Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses GCMN Inserts, Series GND
• Welded Bandsaw Blade: 13' 2″ Long, 1″ Wide, 0.035″ Thick, 2 TPI Carbon Steel, Toothed Edge
• Indexable Cutoff Toolholder: 0.47″ Max Depth of Cut, 0.94″ Max Workpiece Dia, Right Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses GCMN Inserts, Series GND
• Indexable Grooving Toolholder: TTFIL25.4-4T12 18-34, 0.1180″ Max Groove Width 0.4720″ Max Depth, Uses TDX 4, SC*T 4 & TSL 4 Inserts, Through Coolant
• Pens & Pencils; Type: Mechanical Pencil; Tip Type: .5mm Lead; Color: Black Lead
• Indexable Cutoff Toolholder: 0.47″ Max Depth of Cut, 0.94″ Max Workpiece Dia, Left Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses GCMN Inserts, Series GND
• Modular Reamer Heads; Head Diameter (Inch): 16.0000; Head Diameter (mm): 16.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 10.60 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Indexable Cutoff Toolholder: 0.47″ Max Depth of Cut, 0.94″ Max Workpiece Dia, Right Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses GCMN Inserts, Series GND
• Welded Bandsaw Blade: 5' 4-1/2″ Long, 1/2″ Wide, 0.025″ Thick, 8 to 11 TPI Bi-Metal, Toothed Edge
• Helical Flute Thread Mill: 3/8-16, Internal, 4 Flute, 3/8″ Shank Dia, Solid Carbide 16 TPI, 0.3″ Cut Dia, 1-1/8″ LOC, 3.5″ OAL, Bright/Uncoated
• Indexable Grooving Toolholder: TGIFR25.4-4C-T5.5, 0.1180″ Max Groove Width 0.2160″ Max Depth, Uses TDX 3, TDX 4, SC*T 3, SC*T 4, TSL 3 & TSL 4 Inserts, No
• Indexable Thread Mills; Cutting Diameter: 1.1800 in; Maximum Hole Depth (Decimal Inch): 1.9700 in; Maximum Hole Depth (mm): 1.9700 in; Maximum Cutting Length: 0.8270 in; Compatible Insert Style: LYEU; Compatible Insert Size Code: 30..; Toolholder Style: M
• Balancing Rings For Indexables; Type: Balancing Ring; Indexable Tool Type: Standard Tool Holder; For Use With: 45mm Shank Diameter
• Helical Flute Thread Mill: 1/2-13, UNC, 3 Flute, 3/8″ Shank Dia, Solid Carbide 13 TPI, 0.371″ Cut Dia, 1.036″ LOC, 3″ OAL TiN-T21 Coated
• Modular Reamer Heads; Head Diameter (Inch): 21.0000; Head Diameter (mm): 21.0000; Reamer Finish/Coating: Coated; (AlTiN); Flute Type: Straight; Head Length (Decimal Inch): 10.00 mm; Hole Tolerance: h5; h6; h7; Spiral Direction: Neutral; Cutting Direction:
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.90; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15.5; Functional Length (mm): 5.19; P
• Modular Reamer Bodies; Clamping Method: Axial; Shank Diameter (mm): 0.7874; Shank Length (Decimal Inch): 50.00 mm; Overall Length (Decimal Inch): 137.80; Overall Length (mm): 137.80; Cutting Direction: Right Hand; Shank Length (mm): 50.00 mm
• Helical Flute Thread Mill: 1/2-20, UNF, 3 Flute, 3/8″ Shank Dia, Solid Carbide 20 TPI, 0.371″ Cut Dia, 1.036″ LOC, 3″ OAL TiN-T21 Coated
• Indexable Cutoff Toolholder: 1/2″ Max Depth of Cut, 1″ Max Workpiece Dia, Right Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses GCMN Inserts, Series GND
• Shrink-Fit Duo-Lock Holder Cylindrical:
• Indexable Insert Drills; Drill Style: D305; Drill Diameter (Inch): 21/32; Maximum Drill Depth (mm): 49.98; Shank Type: Flange; Shank Diameter (mm): 25.00; Number of Drill Inserts: 2; Cutting Direction: Right Hand; Maximum Drill Depth Range (mm): 0.00 to 5
• Indexable Grooving Toolholder: KIGBAL163, Internal Left Hand, 0.0984″ Max Depth, 1″ Shank Width, No
• Wrenches For Indexables; Wrench Type: Torx Plus Wrench; Indexable Tool Type: Insert; Drive Type: Torx Plus; Hardware Compatibility: Insert Screw; Overall Length: 7.40; Tool Material: Steel; Torx Size: T15P; Series: T15P
• Indexable Grooving Toolholder: TTFIR25.4-3T12 79-150, 0.0950″ Max Groove Width 0.4720″ Max Depth, Uses TD 3 & TS 3 Inserts, Through Coolant
• Indexable Insert Drills; Drill Style: D306; Drill Diameter (Inch): 49/64; Maximum Drill Depth (mm): 58.29; Shank Type: Flange; Shank Diameter (mm): 25.00; Number of Drill Inserts: 2; Cutting Direction: Right Hand; Maximum Drill Depth Range (mm): 50.00 to
• Tire Chains; For Use With: 22x8-11; 22x8-10; 20x8-8; 20x8-11; 20x8.00-8; 20x8.00-10; 20x8x10; Axle Type: Single Axle
• Indexable Cut-Off Toolholders; Toolholder Style: RGEL-SH; Multi-use Tool: Yes; Compatible Insert Size Code: 2; Insert Holding Method: Clamp; Series: RGER/L-SH; Cutting Tool Application: Grooving; Parting; Primary Workpiece Material: Universal; Overall Len
• Taper Length Drill Bit: 0.3390″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Indexable Insert Drills; Drill Style: D305; Drill Diameter (Inch): 21/32; Maximum Drill Depth (Decimal Inch): 1.9680; Shank Type: Flange; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Number of Drill Inserts: 2; Cutting Direction: Right
• Indexable Cut-Off Toolholders; Toolholder Style: RGER-SH; Multi-use Tool: Yes; Compatible Insert Size Code: 2; Insert Holding Method: Clamp; Series: RGER/L-SH; Cutting Tool Application: Grooving; Parting; Primary Workpiece Material: Universal; Overall Len
• Tireless Shine (Liquid) A High-Gloss Dressing for Vehicle Tires
• Taper Length Drill Bit: 0.3230″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.20; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15; Functional Length (mm): 5.19; Pri
• Indexable Insert Drills; Drill Style: D306; Drill Diameter (Inch): 49/64; Maximum Drill Depth (Decimal Inch): 2.2950; Shank Type: Flange; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Number of Drill Inserts: 2; Cutting Direction: Right
• Indexable Grooving Toolholder: TTFIL25.4-3T12 42-60, 0.0870″ Max Groove Width 0.4720″ Max Depth, Uses TDX 3, SC*T 3 & TSL 3 Inserts, Through Coolant
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.70; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15.5; Functional Length (mm): 5.19; P
• Taper Length Drill Bit: 0.3160″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.50; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15; Functional Length (mm): 5.19; Pri
• Indexable Grooving Toolholder: TTFIL25.4-3T12 54-85, 0.0950″ Max Groove Width 0.4720″ Max Depth, Uses TD 3 & TS 3 Inserts, Through Coolant
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Taper Length Drill Bit: 0.3438″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.10; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15; Functional Length (mm): 5.19; Pri
• Cordless Impact Driver: 20V, 1/4″ Drive, 3,250 RPM Variable Speed, Lithium-ion Battery Not Included
• Indexable Grooving Toolholder: TTFIL25.4-4T12 26-42, 0.1180″ Max Groove Width 0.4720″ Max Depth, Uses TDX 4, SC*T 4 & TSL 4 Inserts, Through Coolant
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.30; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15; Functional Length (mm): 5.19; Pri
• Sheet: Buna-N Rubber, 24″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Indexable Grooving Toolholder: TTFIR25.4-3T12 42-60, 0.0870″ Max Groove Width 0.4720″ Max Depth, Uses TDX 3, SC*T 3 & TSL 3 Inserts, Through Coolant
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.40; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15; Functional Length (mm): 5.19; Pri
• Taper Length Drill Bit: 0.3125″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Indexable Grooving Toolholder: TTFIR25.4-4T12 18-34, 0.1180″ Max Groove Width 0.4720″ Max Depth, Uses TDX 4, SC*T 4 & TSL 4 Inserts, Through Coolant
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 15.80; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 15.5; Functional Length (mm): 5.19; P
• Indexable Grooving Toolholder: TTFIR25.4-4T12 26-42, 0.1180″ Max Groove Width 0.4720″ Max Depth, Uses TDX 4, SC*T 4 & TSL 4 Inserts, Through Coolant
• Taper Length Drill Bit: 0.2969″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Laser Printer: Black Use with MB461 MFP, MB471 MFP, MB471W MFP, MB491, MB491+LP & Oki B431D, B431DN
• Adapter Back Plate for 5″ Diam Independent & Self Centering Lathe Chucks Blank Mount, 18mm Through Hole Diam, Cast Iron
• Finisher: 5 gal Pail, Use On Floors Hard Floor Care
• Indexable Grooving Toolholder: TTFIL25.4-3T12 79-150, 0.0950″ Max Groove Width 0.4720″ Max Depth, Uses TD 3 & TS 3 Inserts, Through Coolant
• Snow Shovels & Scrapers; Product Type: Ice Scraper; Collapsible Shovel; Pusher Shovel; Handle Type: Long; Straight; Handle Material: Aluminum; Fiberglass; Rubber; Blade Material: Aluminum; Handle Length (Feet): 20.00; Overall Length (Inch): 22; Overall Le
• Indexable Grooving Toolholder: TTFIR25.4-3T12 54-85, 0.0950″ Max Groove Width 0.4720″ Max Depth, Uses TD 3 & TS 3 Inserts, Through Coolant
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Hex Head Cap Screw: 1/4-20 x 1″, Grade L9 Steel, Zinc Yellow Dichromate Finish Fully Threaded
• Black Coupling: 3″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Indexable Grooving Toolholder: TTFIR25.4-3T12 26-39, 0.0870″ Max Groove Width 0.4720″ Max Depth, Uses TDX 3, SC*T 3 & TSL 3 Inserts, Through Coolant
• Cordless Work Light: 2,000 Lumens
• 320 Grit Aluminum Oxide Round Polishing Stone Coarse/Medium Grade, 3/8″ Wide x 6″ Long x 3/8″ Thick
• Indexable Grooving Toolholder: TTFIR25.4-3T12 20-33, 0.0870″ Max Groove Width 0.4720″ Max Depth, Uses TDX 3, SC*T 3 & TSL 3 Inserts, Through Coolant
• Indexable Grooving Toolholder: TTFIL25.4-3T12 26-39, 0.0870″ Max Groove Width 0.4720″ Max Depth, Uses TDX 3, SC*T 3 & TSL 3 Inserts, Through Coolant
• Indexable Grooving Toolholder: TTFIL25.4-3T12 20-33, 0.0870″ Max Groove Width 0.4720″ Max Depth, Uses TDX 3, SC*T 3 & TSL 3 Inserts, Through Coolant
• Indexable Grooving Toolholder: TGIFL25.4-6C-T5.5, 0.1970″ Max Groove Width 0.2160″ Max Depth, Uses TDX 5, TDX 6, SC*T 5, SC*T 6, TSL 5 & TSL 6 Inserts, No
• NFPA Tie Rod Cylinders; Type: Double Acting; Bore Size (Inch): 32 mm; Rod Diameter (Decimal Inch): 12 mm; Port Size: 1/8; Rod Thread Size: 10 mm; Stroke Length: 160 mm; Body Material: Steel; Bore Size (mm): 32 mm; Stroke Length (mm): 160 mm; Rod Diameter
• Oxygen/Acetylene Torches & Handles; Maximum Cutting: 6; Length (Inch): 10-1/4; Minimum Cutting: 0; Tip Number: 6290; Gas Type: Propane, Propylene, MAPP & Natural Gas; Type: Hand Cutting Torch; Type: Hand Cutting Torch; Type: Hand Cutting Torch; Overall Le
• Extra Length Drill Bit: 0.2283″ Dia, 130 °, High Speed Steel Bright Finish, 5.512″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Indexable Cut-Off Blades; End Type: Double; Hand: Neutral; Blade Height (Decimal Inch): 1.2600; Blade Width (Decimal Inch): 0.0985; Blade Overall Length (Decimal Inch): 5.9060; Blade Overall Length (mm): 150.01; Blade Style: CGP; Compatible Insert Style:
• 1/4″ Diam, 3-3/4 Overall Length, Phillips Drive Concrete Screw & Masonry Fastener Carbon Steel, White StalGard Finish
• Indexable Grooving Toolholder: TTFIR25.4-4T12 34-55, 0.1180″ Max Groove Width 0.4720″ Max Depth, Uses TDX 4, SC*T 4 & TSL 4 Inserts, Through Coolant
• Indexable Grooving Toolholder: TTFIL25.4-4T12 34-55, 0.1180″ Max Groove Width 0.4720″ Max Depth, Uses TDX 4, SC*T 4 & TSL 4 Inserts, Through Coolant
• Traffic Barrels, Delineators & Posts; Type: Traffic Drum; Material: HDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 39.7; Width (Inch): 23-1/2; Additional Information: Sub Brand: Commander ™; Sheeting Grade: High Intensity Prismatic; Rubber Base S
• Electrical Outlet Boxes & Switch Boxes; Enclosure Type: Device; Enclosure Shape: Square; Weather Resistance: Non-Weather-Resistant; Number Of Knockouts: 1; Overall Depth (Decimal Inch): 2-15/16; Number Of Gangs: 2; Body Material: Aluminum; Material: Alumi
• Indexable Grooving Toolholder: TGIFL25.4-4C-T5.5, 0.1180″ Max Groove Width 0.2160″ Max Depth, Uses TDX 3, TDX 4, SC*T 3, SC*T 4, TSL 3 & TSL 4 Inserts, No
• Oven & Grill Cleaner Oven & Grill Cleaner
• Roll: SBR Rubber, 36″ Wide, Red Durometer 60, Plain Backing
• Hatchets & Axes; Type: Throwing Axe; Overall Length Range: 24″ and Longer; Head Weight Range: 1 - 2.9 lbs.; Handle Material: Hickory; Blade Length (Inch): 5-15/16; Head Weight (Grams): 1200; Overall Length (mm): 750.0000; Additional Information: Blade Wid
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Toilet Seats; Type: Closed Front w/ Cover; Style: Elongated; Material: Plastic; Color: Biscuit; Outside Width: 14-1/2; Inside Width: 0; Length (Inch): 18.5; Minimum Order Quantity: Plastic; Material: Plastic
• Indexable Cut-Off Blades; End Type: Double; Hand: Neutral; Blade Height (Decimal Inch): 1.2600; Blade Width (Decimal Inch): 0.1570; Blade Overall Length (Decimal Inch): 5.9060; Blade Overall Length (mm): 150.01; Blade Style: CGP; Compatible Insert Style:
• Toilet Seats; Type: Luxury Slow Close w/ Cover; Style: Slow Close; Material: Plastic; Color: White; Outside Width: 14-1/2; Inside Width: 0; Length (Inch): 18.5; Minimum Order Quantity: Plastic; Material: Plastic
• Metering Pump Accessories; Type: Foot Valve Assembly; Accessory Type: Foot Valve Assembly; For Use With: Metering Pumps; For Use With: Metering Pumps
• Indexable Grooving Toolholder: KGDFR2020K755BZ, External Right Hand, No
• Indexable Grooving Toolholder: KGBASR2020K2225, External Right Hand, No
• Manual Ball Valve: 2″ Pipe, Full Port
• Indexable Grooving Toolholder: KGDFR2020K505BZ, External Right Hand, No
• Barrier Parts & Accessories; Type: Sign Stand; Color: Yellow; Height (Decimal Inch): 45.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 13; Finish/Coating: Yellow; For Use With: Indoor & Outdoor; Material: Plastic; Tape Color: Orange/
• Indexable Grooving Toolholder: KGDFL2020K505BZ, External Left Hand, No
• Barrier Parts & Accessories; Type: Sign Stand; Color: Orange; Height (Decimal Inch): 45.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 13; Finish/Coating: Orange; For Use With: Indoor & Outdoor; Material: Plastic; Tape Color: Orange/
• Indexable Grooving Toolholder: KGDFL2020K1155BZ, External Left Hand, No
• Indexable Boring Bar: C10XSTXPL0911, 11.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel & Solid Carbide Screw, Uses TPGT1815 ™, TPMT1815 ™, TPMX1815 ™, TPEH1815 ™, TPGH1815 ™, TPGB1815 ™ & TPMH1815 ™ Inserts
• #10-32, 2-7/8″ OAL, 3/8″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/2″ Body Length, 3/8″ Thread Length, 1/2″ Thread Depth, Grade 12L14, Zinc-Plated
• Replaceable Tip Drill: 0.669 to 0.705'' Drill Dia, 1.143″ Max Depth, 0.75'' Flatted Shank Uses H3P Inserts, 4.36″ OAL, Through Coolant
• Indexable Grooving Toolholder: KGDFR2020K853BZ, External Right Hand, No
• Indexable Grooving Toolholder: KGDFR2020K653BZ, External Right Hand, No
• Indexable Chamfer & Angle End Mills; Cutting Diameter (Decimal Inch): 0.7874; Cutting Diameter (mm): 20.00; Minimum Cutting Diameter (mm): 20.00; Maximum Cutting Diameter (mm): 31.00; Lead Angle: 60; Shank Type: Straight Shank; Shank Diameter (mm): 20.000
• Bridle, Type 10 Web Sling: 10' Long, 2" Wide, Nylon
• Replaceable Tip Drill: 0.709 to 0.744'' Drill Dia, 1.217″ Max Depth, 1'' Flatted Shank Uses H3P Inserts, 4.74″ OAL, Through Coolant
• Indexable Grooving Toolholder: KGDFL2020K1103BZ, External Left Hand, No
• Boring Bar Sleeves; Bore Diameter (mm): 4.0000; Shank Type: Round with Flats; Shank Width (mm): 24.00; Shank Height (mm): 24.00; Shank Diameter (mm): 25.0000; Overall Length (mm): 135.0000; Bore Depth (mm): 24.00; Material: Steel
• Indexable Grooving Toolholder: KGDFL2020K653BZ, External Left Hand, No
• Indexable Grooving Toolholder: KGDFL2020K1004BZ, External Left Hand, No
• Taper Length Drill Bit: 0.4291″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Indexable Grooving Toolholder: KGDFR2020K1004BZ, External Right Hand, No
• Indexable Grooving Toolholder: KGDFL2020K704BZ, External Left Hand, No
• Indexable Grooving Toolholder: KGDFR2020K504BZ, External Right Hand, No
• Black Reducing Coupling: 4 x 2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Indexable Grooving Toolholder: KGDFL2020K504BZ, External Left Hand, No
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 22 mm Stroke, M20 x 1.5 Thread 112 mm OAL, 39.2 lb Force
• Indexable Grooving Toolholder: KGDFR2020K704BZ, External Right Hand, No
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 22 mm Stroke, M20 x 1.5 Thread 126.5 mm OAL, 39.2 lb Force
• Welding Helmet: Black, Nylon, Shade 5 to 13, Ratchet Adjustment
• Indexable Grooving Toolholder: KGDFR2020K503BZ, External Right Hand, No
• Brake Flush (Aerosol)
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 22 mm Stroke, M20 x 1.5 Thread 112 mm OAL, 39.2 lb Force
• Taper Shank Drill Bit: 0.7031″ Dia, 2MT, 118 °, High Speed Steel Oxide Finish, 9.5″ OAL, Spiral Flute
• Twisted Eye & Eye, Type 4 Web Sling: 30' Long, 1" Wide, 3200 lb Vertical Capacity, Polyester
• Split Equipment Cleaner Cleaner/Degreaser Detergent
• Plastic Sheet: Acetal, 2-1/4″ Thick, 6″ Long, White, 8,500 psi Tensile Strength Rockwell M-90
• Welded Bandsaw Blade: 14' 10″ Long, 1″ Wide, 0.035″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• Shrink Fit Tool Holder & Adapter
• Plastic Bar: Acetal, 2-1/2″ Thick, White
• 600 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• Hex Head Cap Screw: 3/4-16 x 3″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Welded Bandsaw Blade: 14' 10″ Long, 1″ Wide, 0.035″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• Key Switches; Switch Type: Flush Mount; Switch Sequence: On-Off; Contact Form: SPDT; Actuator Type: Switch; Key; Terminal Type: Spring; Voltage: 30; Material: Stainless Steel
• Welded Bandsaw Blade: 14' 10″ Long, 1″ Wide, 0.035″ Thick, 5 to 8 TPI Bi-Metal, Toothed Edge
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• Key Switches; Switch Type: Flush Mount; Switch Sequence: On-Off; Contact Form: SPDT; Actuator Type: Switch; Key; Terminal Type: Spring; Voltage: 30; Material: Stainless Steel
• Key Switches; Switch Type: Flush Mount; Switch Sequence: On-Off; Contact Form: DPDT; Actuator Type: Switch; Key; Terminal Type: Spring; Voltage: 30; Material: Stainless Steel
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Key Switches; Switch Type: Flush Mount; Switch Sequence: On-Off; Contact Form: DPDT; Actuator Type: Switch; Key; Terminal Type: Spring; Voltage: 30; Material: Stainless Steel
• Sheet: SBR Rubber, 36″ Wide, 36″ Long, Black Durometer 75, Acrylic Adhesive Backing
• 0.8mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Standard-Duty Shock Absorber: 12 mm Rod Dia, 53.1 mm OD, 50 mm Stroke, M36 x 1.5 Thread 235 mm OAL, 68.6 lb Force
• Sheet: Neoprene Rubber, 24″ Wide, 36″ Long, White Durometer 60, Plain Backing
• 0.9mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Micro Drill Bit: 0.0374″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 1.9685″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Standard-Duty Shock Absorber: 12 mm Rod Dia, 53.1 mm OD, 50 mm Stroke, M36 x 1.5 Thread 254.5 mm OAL, 68.6 lb Force
• Micro Drill Bit: 0.0335″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 1.9685″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Replaceable Tip Drill: 0.748 to 0.783'' Drill Dia, 2.407″ Max Depth, 1'' Straight-Cylindrical Shank Uses H3P Inserts, 6″ OAL, Through Coolant
• Micro Drill Bit: 0.0295″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 1.9685″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Replaceable Tip Drill: 0.787 to 0.823'' Drill Dia, 1.352″ Max Depth, 1'' Straight-Cylindrical Shank Uses H3P Inserts, 5.01″ OAL, Through Coolant
• Metering Pump Accessories; Type: Pump Repair Kit; For Use With: CP500V300BTC; Length (Decimal Inch): 7.0000; For Use With: CP500V300BTC
• Replaceable Tip Drill: 0.748 to 0.783'' Drill Dia, 1.284″ Max Depth, 1'' Straight-Cylindrical Shank Uses H3P Inserts, 4.88″ OAL, Through Coolant
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Left Hand; Maximum Depth of Cut (Decimal Inch): 0.9840; Maximum Groove Width (Decimal Inch): 0.1770; Minimum Groove Width (Decimal Inch): 0.1380; Toolholder Style: CTE; Tool Material: Steel; Inser
• Metering Pump Accessories; Type: Pump Repair Kit; For Use With: CP500V300BTG; Length (Decimal Inch): 7.0000; For Use With: CP500V300BTG
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Left Hand; Maximum Depth of Cut (Decimal Inch): 0.3940; Maximum Groove Width (Decimal Inch): 0.1770; Minimum Groove Width (Decimal Inch): 0.1380; Toolholder Style: CTE; Tool Material: Steel; Inser
• Swiss-Pattern File: 4″ OAL, Cut 2, Round 3″ LOC, 4″ Wide, 1/32″ Thick, Tang
• Barrier Parts & Accessories; Type: Square Power Post; Color: Black; Height (Decimal Inch): 63.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 1.75; Finish/Coating: Black; For Use With: Power Post Upright Type III Barricades; Material:
• Closed Cell EPDM Foam: 36″ Wide, Black Plain Backing
• Taper Length Drill Bit: 0.3661″ Dia, 142 ° ALtima Plus Finish, RH Cut, Helical Flute, Straight Shank
• Metering Pump Accessories; Type: Pump Repair Kit; For Use With: CRP500V300ATC; Length (Decimal Inch): 7.0000; For Use With: CRP500V300ATC
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Right Hand; Maximum Depth of Cut (mm): 12.00; Maximum Groove Width (mm): 3.49; Minimum Groove Width (mm): 2.50; Toolholder Style: CTE; Tool Material: Steel; Insert Holding Method: Clamp; Compatibl
• Barrier Parts & Accessories; Type: Square Power Post; Color: White; Height (Decimal Inch): 63.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 1.75; Finish/Coating: White; For Use With: Power Post Upright Type III Barricades; Material:
• Taper Length Drill Bit: 0.3740″ Dia, 142 ° ALtima Plus Finish, RH Cut, Helical Flute, Straight Shank
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Brown; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Yellow; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Left Hand; Maximum Depth of Cut (Decimal Inch): 0.3150; Maximum Groove Width (Decimal Inch): 0.0980; Minimum Groove Width (Decimal Inch): 0.0590; Toolholder Style: CTE; Tool Material: Steel; Inser
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Red; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Red; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Helical Flute Thread Mill: 3/8-16, Internal & External, 4 Flute, 5/16″ Shank Dia, Solid Carbide 16 TPI, 0.285″ Cut Dia, 3/4″ LOC, 3″ OAL, AlTiN Nano Coated
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Left Hand; Maximum Depth of Cut (Decimal Inch): 0.3540; Maximum Groove Width (Decimal Inch): 0.1370; Minimum Groove Width (Decimal Inch): 0.0980; Toolholder Style: CTE; Tool Material: Steel; Inser
• Arc Flash Clothing Kit: Size 3X-Large, Cotton, Coveralls & Hoods
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Magenta; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Magenta; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Taper Length Drill Bit: 0.3937″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 390
• Deep Groove Ball Bearing: 75 mm OD Bearing Number SS6009
• FS Amine Z Disinfectant, Sanitizer, and Virucide
• Arc Flash Clothing Kit: Size X-Large, Cotton, Jacket, Pants & Hoods
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Gold; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Yellow; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Plastic Sheet: Garolite, 5/8″ Thick, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• Taper Shank Drill Bit: 1.063″ Dia, 3MT, 118 °, High Speed Steel TiN Finish, 6.6929″ Flute Length, 11.4567″ OAL, Cone Relief Point, Spiral Flute
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Yellow; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Yellow; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Arc Flash Clothing Kit: Size 3X-Large, Cotton, Coat, Hoods & Leggings
• Arc Flash Clothing Kit: Size Small, Cotton, Jacket, Pants & Hoods
• Hose Reel Accessories; For Use With: Twin Hydraulic 7000 Sereis Reelcraft Reels; For Use With: Twin Hydraulic 7000 Sereis Reelcraft Reels
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Evergreen; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Evergreen; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Barrier Parts & Accessories; Type: Sign Stand; Color: Yellow; Height (Decimal Inch): 45.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 13; Finish/Coating: Yellow; For Use With: Indoor & Outdoor; Material: Plastic; Tape Color: Orange/
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Purple; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Magenta; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Barrier Parts & Accessories; Type: Sign Stand; Color: White; Height (Decimal Inch): 45.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 13; Finish/Coating: White; For Use With: Indoor & Outdoor; Material: Plastic; Tape Color: Orange/Wh
• Black Hex Bushing: 3-1/2 x 3″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Blue; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Blue; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Barrier Parts & Accessories; Type: Sign Stand; Color: Orange; Height (Decimal Inch): 45.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 13; Finish/Coating: Orange; For Use With: Indoor & Outdoor; Material: Plastic; Tape Color: Orange/
• Indexable High-Feed End Mill: 12 mm Cylindrical Shank Uses 3 LPGT Inserts, 0.5 mm Max Depth, 80 mm OAL, Through Coolant
• Zep Aviation Pure-Fect Lavatory Deodorant
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Silver; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Black; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Closed Cell Neoprene Foam: 36″ Wide, 36″ Long, Black Plain Backing
• Taper Length Drill Bit: 0.1339″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Pink; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Safety Pink; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Taper Length Drill Bit: 0.1890″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Black; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Black; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Taper Length Drill Bit: 0.1654″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Orange; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Orange; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Laser Printer: Cyan Use with Innovera Toner Cartridge Replacement for HP Color Laserjet Enterprise M651dn, M651n, M651xh
• M3.5x0.6, 28.35mm OAL, 6mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 22mm Body Length, 6.35mm Thread Length, 6.4mm Thread Depth, Grade 303, Uncoated
• Plastic Sheet: Acetal, 3/8″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Taper Length Drill Bit: 0.1285″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Sky Blue; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Sky Blue; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• M3.5x0.6, 26.35mm OAL, 6mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 20mm Body Length, 6.35mm Thread Length, 6.4mm Thread Depth, Grade 303, Uncoated
• Taper Length Drill Bit: 0.1575″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256