Products

• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4063; Diameter (Inch): 13/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ink Cartridge: Black & Tri-color Use with HP DeskJet D1660, D2530, D2545, D2560, D2660, D2680, D5560, DeskJet All-In-One F2430, F2440, F2480 & F4210
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4528; Diameter (mm): 11.50; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4094; Diameter (mm): 10.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4567; Diameter (mm): 11.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Wheel Brushes; Wire Type: Crimped; Outside Diameter (Inch): 12; Arbor Hole Thread Size: 2; Arbor Hole Style: Round; Arbor Hole Size: 2; Fill Material: Steel; Filament Wire Diameter Range: 0.0100-0.0199; Maximum Rpm: 3600.000
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4449; Diameter (mm): 11.30; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Boring Bar: C05-SCLCL2, 95.00&deg N/A Solid Carbide 4.6900″ OAL, Screw,
• Indexable Boring Bar: C05-SCLCR2, 95.00&deg N/A Solid Carbide 4.6900″ OAL, Screw,
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.3976; Diameter (mm): 10.10; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Welding Helmet Accessories; Compatibility: 3M Speedglas Heavy-Duty Welding Helmet G5-01; Adjustment: Non-Adjustable; Color: Black
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Roll: Buna-N Rubber, 12″ Wide, Black Durometer 50, Plain Backing
• Hex Head Cap Screw: 7/8-9 x 4-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4016; Diameter (mm): 10.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7323; Diameter (mm): 18.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4488; Diameter (mm): 11.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7480; Diameter (Inch): 3/4; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Dispenser Settings - Black
• Spare Parts Packages For Indexables; Indexable Tool Type: Drilling; For Use With: CrownLoc Drill Bodies; Package Includes: Screws; Rod; Spring; Series: SD105; Includes: Screws; Rod; Spring; Parts Package Type: Drilling
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4370; Diameter (Inch): 7/16; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7441; Diameter (mm): 18.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Spare Parts Packages For Indexables; Indexable Tool Type: Drilling; For Use With: CrownLoc Drill Bodies; Package Includes: Screws; Rod; Spring; Series: SD107; Includes: Screws; Rod; Spring; Parts Package Type: Drilling
• Rotary & Multi-Tools; Product Type: Tool Only; Batteries Included: No; Battery Chemistry: Lithium-ion; No-Load RPM: 20000; Voltage: 18.0; For Use With: StarlockPlus Accessories; Starlock; Handle Type: Straight; Includes: Plunge Saw Blade (1-1/4 in Wood; M
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7756; Diameter (mm): 19.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.039″ Dia, 0.059″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4331; Diameter (mm): 11.00; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Plastic Sheet: Acetal, 1-1/4″ Thick, White Rockwell M-90
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7402; Diameter (mm): 18.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.3937; Diameter (mm): 10.00; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.039″ Dia, 0.059″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Thread Forming Tap: DIN 2174, 7GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 25 mm Stroke, M27 x 1.5 Thread 156 mm OAL, 27.3 lb Force
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7344; Diameter (Inch): 47/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating;
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7813; Diameter (Inch): 25/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating;
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 25 mm Stroke, M27 x 1.5 Thread 156 mm OAL, 27.3 lb Force
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4409; Diameter (mm): 11.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.039″ Dia, 0.117″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 12.0000; Outside Diameter: 20.0000; Wall Thickness (mm): 4.00; Material: Silicone; Standard Coil Length (Feet): 5; Maximum Working Pressure (psi): 80; Hardness: 70A; Special Item Information: Steel W
• Thread Forming Tap: DIN 2174, 6GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7795; Diameter (mm): 19.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Plastic, Rubber & Synthetic Tube; Inside Diameter (Inch): 1/2; Outside Diameter (Inch): 13/16; Wall Thickness (Inch): 5/32; Material: Silicone; Standard Coil Length (Feet): 5; Maximum Working Pressure (psi): 80; Hardness: 70A; Special Item Information: St
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, TiCN Finish 0.46″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, H4, Series 781
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7835; Diameter (mm): 19.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7362; Diameter (mm): 18.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 3/4″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7520; Diameter (Inch): 3/4; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Roll: Neoprene Rubber, 12″ Wide, Black Durometer 50, Plain Backing
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7500; Diameter (Inch): 3/4; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Standard-Duty Shock Absorber: 5 mm Rod Dia, 21.9 mm OD, 12 mm Stroke, M16 x 1.5 Thread 122.7 mm OAL, 14.7 lb Force
• Taper Length Drill Bit: Oxide Finish, 11″ OAL
• Indexable Grooving Toolholder: QS-QI-LFK20C16-023B, Internal Left Hand, 1.7717″ Max Groove Width 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7087; Diameter (mm): 18.00; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7559; Diameter (mm): 19.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Plate Thickness Tolerance: ™0.0050 in; Plate Thickness Compatibility: 2 in; Plate Thickness Tolerance
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 3/8″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7587; Diameter (mm): 19.27; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7126; Diameter (mm): 18.10; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Folding Gates & Barricades; Type: Crowd Control Parade Barricade; Height (Inch): 39.5; Max Width (Inch): 21; Material: Plastic; Color: White; Additional Information: Reflective: Engineer Grade Striped Sheeting; Comes with Recycled Rubber Feet; Sub-Brand:
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1935; Drill Bit Size (Wire): #10; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch
• Replaceable Tip Drill: 0.63 to 0.665'' Drill Dia, 3.287″ Max Depth, 0.75'' Straight-Cylindrical Shank Uses H3P Inserts, 6.43″ OAL, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7598; Diameter (mm): 19.30; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1960; Drill Bit Size (Wire): #9; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch)
• Folding Gates & Barricades; Type: Crowd Control Parade Barricade; Height (Inch): 39.5; Max Width (Inch): 21; Material: Plastic; Color: Orange; Additional Information: Reflective: Engineer Grade Striped Sheeting; Comes with Recycled Rubber Feet; Sub-Brand:
• Replaceable Tip Drill: 0.591 to 0.626'' Drill Dia, 3.092″ Max Depth, 0.75'' Straight-Cylindrical Shank Uses H3P Inserts, 6.15″ OAL, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7638; Diameter (mm): 19.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1990; Drill Bit Size (Wire): #8; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch)
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7165; Diameter (mm): 18.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Hex Head Cap Screw: 5/8-11 x 7″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7656; Diameter (Inch): 49/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating;
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9419; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Indexable Spade Drill: 0.9055 to 0.9448″ Dia, 1-13/32″ Max Depth, Straight Flute Flanged Shank
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7188; Diameter (Inch): 23/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating;
• Indexable Spade Drill: 23 to 24 mm Dia, 36 mm Max Depth, Straight Flute 25 mm Shank Dia, Flanged Shank, 125.3 mm OAL
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7205; Diameter (mm): 18.30; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7677; Diameter (mm): 19.50; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Cleaners & Detergents-Floor Cleaner & Degreaser: Bottle, Use On Floor Cleaning Water Based
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7244; Diameter (mm): 18.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7717; Diameter (mm): 19.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Roll: SBR Rubber, 36″ Wide, Black Durometer 75, Plain Backing
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Grooving Tool: RH Cut Solid Carbide
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Grooving Tool: LH Cut Solid Carbide
• Roll: Neoprene Rubber, 56″ Wide, Black Durometer 70, Plain Backing
• Die Drill Bit: 0.3770″ Dia, 135 °, Solid Carbide Bright Finish, 1″ Flute Length, 2-1/2″ OAL
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK245-SET; Series: PK245
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK301-SET; Series: PK301
• Wall & Dimmer Light Switches; Switch Type: Three Way; Switch Operation: Toggle; Color: Red; Color: Red; Grade: Industrial; Number of Poles: 1; Amperage: 20 A; Voltage: 120 V; Number Of Poles: 1; Amperage: 20 A; 20; Voltage: 120 V; Includes: Terminal Screw
• Polyester Film Tape: 1-1/2″ Wide, 72 yd Long, 3.3 mil Thick 50 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Grooving Tool: RH Cut Solid Carbide
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK254-SET; Series: PK254
• Compression Packing; Material: Graphite; Size: 1/4; Spool Length: 100; Color: Gray; Maximum Working Pressure (psi): 6500; 6500.0 psi; PSC Code: 5330; Color: Gray; Material: Graphite; Maximum Working Pressure: 6500.0 psi; Material: Graphite
• Grooving Tool: LH Cut Solid Carbide
• Grooving Tool: RH Cut Solid Carbide
• 1/2″ Diam 1' Long 1018/12L14 Steel Gear Rack 20 Pitch, 14.5° Pressure Angle, Round
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Grooving Tool: RH Cut Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8670; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Nails
• Modular Threading Cutting Unit Heads; System Size: D32; Series Name: DTC-SIR/L; Thread Type: Internal; Cutting Direction: Right; Compatible Insert Style: IR; Compatible Insert Size Code: 16; Center To Cutting Edge: 0.7760 in; Head Length/Projection (Decim
• Modular Threading Cutting Unit Heads; System Size: D32; Series Name: DTC-SIR/L; Thread Type: Internal; Cutting Direction: Right; Compatible Insert Style: IR; Compatible Insert Size Code: 22; Center To Cutting Edge: 0.8500 in; Head Length/Projection (Decim
• Grooving Tool: LH Cut Solid Carbide
• Modular Threading Cutting Unit Heads; System Size: D32; Series Name: DTC-SIR/L; Thread Type: Internal; Cutting Direction: Left; Compatible Insert Style: IL; Compatible Insert Size Code: 22; Center To Cutting Edge: 0.8500 in; Head Length/Projection (Decima
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Die Drill Bit: 135 °, Solid Carbide Bright/Polished Finish, Series CoroDrill 400
• Portable Lockout Kits; Type: Padlock & Hasp Kit; Container Type: Pouch; Number of Padlocks Included: 1; Key Type: Keyed Alike; Includes: Comes with S1010 pouch, 410RED Zenex ™ Thermoplastic safety padlock, 420 lockout hasp, and (3) Do Not Operate laminate
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Grooving Tool: LH Cut Solid Carbide
• Indexable Ball Nose End Mills; Milling Diameter: 0.5000 in; Maximum Depth Of Cut: 0.2500 in; Shank Diameter: 0.5000 in; Shank Type: Modular; Compatible Insert Style: NKET; Compatible Insert Size Code: 1202; Toolholder Style: 1BW7T; Series: 1BW7; Overall L
• Traffic Barrels, Delineators & Posts; Type: Vertical Panel; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 14-3/4; Additional Information: Sheeting Grade: Diamond; Stripe Width: 4 in; Series: 4100; Subbrand: Gemstone ™; Sign Dime
• Corner Radius End Mill: 3/16" Dia, 5/16" LOC, 0.0300" Radius, 4 Flute, Solid Carbide
• Pushbutton Switches; Switch Type: Door Release Pushbutton; Pushbutton Type: Extended; Pushbutton Shape: Round; Pushbutton Color: Black; Operator Illumination: NonIlluminated; Operation Type: Momentary (MO); Pushbutton Material: Plastic; Amperage (mA): 10;
• 1/2″ Diam 1' Long 1018/12L14 Steel Gear Rack 16 Pitch, 20° Pressure Angle, Round
• Shrink-Fit Tool Holder & Adapter: 7/16″ Shank Dia, CAT40 Modular Connection, BT40 Taper Shank 3.15″ Projection, 0.94″ Nose Dia
• Helical Flute Thread Mill: 7/16-14, Internal & External, 4 Flute, 3/8″ Shank Dia, Solid Carbide 14 TPI, 0.34″ Cut Dia, 7/8″ LOC, TiAlN Coated
• Replaceable Tip Drill: 18 to 18.99 mm Drill Dia, 28.5 mm Max Depth, 25 mm Flange Shank Seat Size 18, 112.5 mm OAL, Through Coolant
• Shrink-Fit Tool Holder & Adapter: CAT40 Modular Connection, CAT 40 Taper Shank 1.063″ Nose Dia
• Welded Bandsaw Blade: 25' 3″ Long, 3/4″ Wide, 0.032″ Thick, 2 TPI Carbon Steel, Toothed Edge
• Square End Mill: 1/16'' Dia, 0.186'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Replaceable Tip Drill: 19 to 19.99 mm Drill Dia, 30 mm Max Depth, 25 mm Flange Shank Seat Size 19, 115 mm OAL, Through Coolant
• ER: ER8, 0.2 mm 13.6mm OAL, 8.5mm Overall Diam, 0.00024″ TIR
• Extra Length Drill Bit: 0.2008″ Dia, 130 °, Cobalt Bright Finish, 5.315″ Flute Length, 7.677″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 618
• Helical Flute Thread Mill: 9/16, Internal & External, 4 Flute, 1/2″ Shank Dia, Solid Carbide 12 TPI, 0.41″ Cut Dia, 1.24″ LOC, 3.5″ OAL, AM210 Coated
• Black Reducing Flange: 4 x 11″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Indexable Ball Nose End Mills; Milling Diameter: 0.5000 in; Maximum Depth Of Cut: 0.2500 in; Shank Diameter: 0.5000 in; Shank Type: Weldon Flat; Compatible Insert Style: NKET; Compatible Insert Size Code: 1202; Toolholder Style: 1BW7T; Series: 1BW7; Overa
• Floor Pads, Bonnets & Screens; Type: Scrubbing Pad; Pad Diameter: 16 in; Pad Color: Gray; Material: Plastic; Grit Grade: Non-Abrasive; Machine Size (Inch): 17; Included Accessories: Clutch Plate & Riser; Applications: General Cleaning; Application: Genera
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Electronic Button; Pushbutton Shape: Round; Pushbutton Color: Red; Green; Operator Illumination: Illuminated; Amperage (mA): 2; Voltage: 12-24; Contact Form: 1NO/1NC; Standards Met: ISO 9001;
• Ball Grip Quick-Release Pin: Button Handle, 9/16″ Pin Dia, 2-1/2″ Usable Length 3.91″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Electronic Button; Pushbutton Shape: Round; Pushbutton Color: Green; Operator Illumination: Illuminated; Amperage (mA): 2; Voltage: 12-24; Contact Form: 1NO/1NC; Standards Met: ISO 9001; FM 5
• Hex Head Cap Screw: 3/8-24 x 1-3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• 5.85mm, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Hydraulic Chuck Sleeve: 5/8″ ID, 0.9449″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 1/2″ ID, 0.6496″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 3/8″ ID, 0.9449″ Head Dia Coolant Through
• 3/8″ Screw 1-3/4″ OAL 0.38″ ID x 3/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Hydraulic Chuck Sleeve: 5/16″ ID, 0.9449″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 1/4″ ID, 0.9449″ Head Dia Coolant Through
• Black 90 ° Elbow: 2-1/2″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• 5/16″ Screw 1-3/4″ OAL 0.315″ ID x 3/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Hydraulic Chuck Sleeve: 1/8″ ID, 0.9449″ Head Dia Coolant Through
• Impact Socket: 1/2″ Drive 6-Point
• Strip: Neoprene Rubber, 2″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Static Phase converter. Single phase to 3 phase. Horse power range 1/3HP to 3/4HP HEAVY DUTY Static three phase converter
• ER: ER11, 5 mm 18mm OAL, 11.5mm Overall Diam, 0.0004″ TIR
• Hydraulic Chuck Sleeve: 1/8″ ID, 3/4″ OD, 0.9449″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 3/8″ ID, 3/4″ OD, 0.9449″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 1/4″ ID, 3/4″ OD, 0.9449″ Head Dia Coolant Through
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Wrot Copper Pipe Flange: 3″ Fitting, P, Press Fitting, Lead Free P, Press Fitting
• Hydraulic Chuck Sleeve: 10 mm ID, 20 mm OD, 24 mm Head Dia Coolant Through
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 70, Plain Backing
• Hydraulic Chuck Sleeve: 5 mm ID, 20 mm OD, 24 mm Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 3/16″ ID, 3/4″ OD, 0.9449″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 7/16″ ID, 3/4″ OD, 0.9449″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 1/8″ ID, 1/2″ OD, 0.6496″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 3/16″ ID, 1-1/4″ OD, 1.3976″ Head Dia Coolant Through
• Helical Flute Thread Mill: 7/16-20, Internal, 4 Flute, 3/8″ Shank Dia, Solid Carbide 20 TPI, 0.35″ Cut Dia, 1.3″ LOC, 3.5″ OAL, Bright/Uncoated
• Hydraulic Chuck Sleeve: 1/4″ ID, 1-1/4″ OD, 1.3976″ Head Dia Coolant Through
• Sheet: Neoprene Rubber, 1″ Thick, 6″ Wide, 12″ Long, Black Durometer 50, Plain Backing
• Hydraulic Chuck Sleeve: 1/8″ ID, 1-1/4″ OD, 1.3976″ Head Dia Coolant Through
• Sheet: Silicone Rubber, 24″ Wide, 36″ Long, Red Durometer 40, Plain Backing
• Hydraulic Chuck Sleeve: 5/16″ ID, 1-1/4″ OD, 1.3976″ Head Dia Coolant Through
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Helical Flute Thread Mill: 3/8-24, Internal, 4 Flute, 3/8″ Shank Dia, Solid Carbide 24 TPI, 0.3″ Cut Dia, 1-1/8″ LOC, 3.5″ OAL, Bright/Uncoated
• Hydraulic Chuck Sleeve: 5/16″ ID, 1/2″ OD, 0.6496″ Head Dia Coolant Through
• Hex Head Cap Screw: 5/8-11 x 3-3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Twist Lock Receptacles; Receptacle/Part Type: Receptacle; Gender: Female; NEMA Configuration: L16-30R; Flange Style: No Flange; Amperage: 30 A; Number Of Poles: 3; Number Of Wires: 4; Maximum Cord Diameter: 29.20 mm; Resistance Features: Impact-Resistant;
• Hydraulic Chuck Sleeve: 3/8″ ID, 1-1/4″ OD, 1.3976″ Head Dia Coolant Through
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1″ Wide x 6″ Long x 1/4″ Thick
• 600 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/2″ Thick
• Hydraulic Chuck Sleeve: 3/16″ ID, 1/2″ OD, 0.6496″ Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 10 mm ID, 24 mm Head Dia Coolant Through
• Deep Groove Ball Bearing: 110 mm OD 6,924 lb Static Load
• Hydraulic Chuck Sleeve: 6 mm ID, 24 mm Head Dia Coolant Through
• Deep Groove Ball Bearing: 110 mm OD 6,924 lb Static Load
• Hydraulic Chuck Sleeve: 3 mm ID, 24 mm Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 5 mm ID, 24 mm Head Dia Coolant Through
• Disposable Gloves: 4.72 mil, Nitrile-Coated, Nitrile White, Textured Fingertips
• Formula 965 Premium Car and Truck Wash
• Hydraulic Chuck Sleeve: 10 mm ID, 32 mm OD, 35.5 mm Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 8 mm ID, 32 mm OD, 35.5 mm Head Dia Coolant Through
• Hydraulic Chuck Sleeve: 6 mm ID, 32 mm OD, 35.5 mm Head Dia Coolant Through
• Disposable Gloves: 4.72 mil, Nitrile-Coated, Nitrile White, Textured Fingertips
• Disposable Gloves: 4.72 mil, Nitrile-Coated, Nitrile White, Textured Fingertips
• Disposable Gloves: 4.72 mil, Nitrile-Coated, Nitrile White, Textured Fingertips
• Arc Welding Accessories; For Use With: Electrodes
• Disposable Gloves: 4.72 mil, Nitrile-Coated, Nitrile White, Textured Fingertips
• Pipe & Cable Clamps; Clamp Type: Riser Clamp; Clamp Color: Gray; Material: Carbon Steel; Load Capacity (Lb.): 2700.000; Nominal Pipe Size: 12
• Extra Length Drill Bit: 0.3594″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Hex Head Cap Screw: 5/8-18 x 1-3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Die Drill Bit: 0.2720″ Dia, 140 °, Solid Carbide Bright Finish, 1-1/2″ Flute, 2-11/16″ OAL, Series 470
• Profiling Tools; Maximum Hole Depth (Decimal Inch): 1.0000; Maximum Hole Depth (Inch): 1
• Sheet: Silicone Rubber, 12″ Wide, 36″ Long, White Durometer 60, Plain Backing
• Single Profile Thread Mill: #4-40 to #4-48, 40 to 48 TPI, Internal & External, 2 Flutes, Solid Carbide 0.08″ Cut Dia, 3/16″ Shank Dia, 2″ OAL, AlTiN Coated
• Paints
• Single Profile Thread Mill: #6-32 to #6-40, 32 to 40 TPI, Internal & External, 4 Flutes, Solid Carbide 0.098″ Cut Dia, 3/16″ Shank Dia, 2″ OAL, Bright/Uncoated
• Grooving Tool: LH Cut Solid Carbide
• ER32 Clamping Nut
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Boring Bar: 0.06″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.003″ Corner Radius
• 11″ Long x 8-1/2″ Wide Aluminum Clipboard Binder Silver
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• ER: ER32 2″ OAL, 1″ Overall Diam
• Boring Bar: 0.08″ Min Bore, 13/64″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.003″ Corner Radius
• Penetrant & Lubricant: 5 gal Pail Dark Brown
• Welded Bandsaw Blade: 21' 9″ Long, 1″ Wide, 0.035″ Thick, 2 TPI Carbon Steel, Toothed Edge
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• ER: ER32 2″ OAL, 1″ Overall Diam
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 2.2440 in; Maximum Drill Size: 2.5590 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Grooving Tool: LH Cut Solid Carbide
• Replaceable Tip Drill: 0.5511 to 0.5669'' Drill Dia, 1.7187″ Max Depth Seat Size 0.2160, Through Coolant
• ER: ER32 2″ OAL, 1″ Overall Diam
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Boring Bar: 0.11″ Min Bore, 13/64″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.003″ Corner Radius
• Replaceable Tip Drill: 0.5393 to 0.5472'' Drill Dia, 1.6562″ Max Depth Seat Size 0.1760, Through Coolant
• Grooving Tool: LH Cut Solid Carbide
• ER: ER32 2″ OAL, 1″ Overall Diam
• Boring Bar: 0.1″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.003″ Corner Radius
• Replaceable Tip Drill: 0.5196 to 0.5354'' Drill Dia, 1.5937″ Max Depth Seat Size 0.1760, Through Coolant
• Grooving Tool: RH Cut Solid Carbide
• Boring Bar: 0.06″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.003″ Corner Radius
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• ER: ER32 2″ OAL, 1″ Overall Diam
• Indexable Ball Nose End Mills; Milling Diameter: 0.7500 in; Maximum Depth Of Cut: 0.3750 in; Shank Diameter: 0.7500 in; Shank Type: Weldon Flat; Compatible Insert Style: NKET; Compatible Insert Size Code: 1803; Toolholder Style: 1BW7V; Series: 1BW7; Overa
• Grooving Tool: RH Cut Solid Carbide
• Hydraulic Cylinder Mounting Accessories; Type: Male Hydraulic Coupler; Accessory Type: Male Hydraulic Coupler; For Use With: Hydraulic Systems
• Traffic Barricades; Type: A-Frame; Barricade Height (Inch): 40; Material: Plastic; Barricade Width (Inch): 29; Reflective: Yes; Compliance: None; Color: White; Weight (Lb.): 6.0000; Top Panel Height (Inch): 8; Top Panel Width (Inch): 72; Bottom Panel Heig
• Indexable High-Feed End Mill: 3/4″ Cut Dia, 0.7″ Modular Shank Uses 4 UNLU Inserts, 0.02″ Max Depth, 1.18″ OAL, Through Coolant
• Boring Bar: 0.05″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.003″ Corner Radius
• Grooving Tool: LH Cut Solid Carbide
• Stanchion: 40″ High, Dome Base
• ER: ER32, 20 mm
• Indexable High-Feed End Mill: 20 mm Cut Dia, 0.7 mm Modular Shank Uses 5 UNLU Inserts, 0.5 mm Max Depth, 23 mm OAL, Through Coolant
• Boring Bar: 0.05″ Min Bore, 0.3″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.003″ Corner Radius
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Stanchion: 40″ High, Dome Base
• Indexable High-Feed End Mill: 25 mm Cut Dia, 0.98 mm Cylindrical Shank Uses 3 UNLU Inserts, 1 mm Max Depth, 220 mm OAL, Through Coolant