Products

• All-Purpose Cleaner: 14 gal Can Aerosol, Sweet Scent
• Bolex Stain & Scale Remover
• Threading Insert:27 Size, TQS Style, TT9080 Grade, Solid Carbide Coated Finish, 1.90 to 5.50 mm & 4.5 to 13 TPI, Series TQS27
• Weatherproof Box Covers; Electrical Box Shape: Rectangle; Number Of Outlets: 1; Resistance Features: Weather-Resistant; Housing Material: Aluminum; Finish: Aluminum Lacquer; Overall Length: 4.6080 in; Recommended Environment: Outdoor; Overall Width: 3.168
• Swivel Top Plate Caster: Thermoplastic Rubber, 4″ Wheel Dia, 1-1/4″ Wheel Width, 247 lb Capacity, 4-15/16″ OAH 2.875″ Plate Length, 3.63″ Plate Width, Rollock Brake
• Threading Insert:27 Size, TQS Style, TT9080 Grade, Solid Carbide Coated Finish, 20 TPI, Series TQS27
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 5; Cutting Width (Decimal Inch): 5; Cutting Width (Inch): 5
• Extension Tap: 10-24, 3 Flutes, TiCN Finish, Cobalt, Long Reach 2-3 P, 5.51″ OAL, 0.591″ Thread Length, 2B & 3B Class of Fit
• Compression Spring: 1.469″ OD, 2.5″ Free Length 0.207″ Wire Dia, 144.862 lb Max Load, 212.351 lb/in Spring Rate, Stainless Steel
• Lavatory Faucets; Type: Service Sink Faucet with Top Brace; Inlet Location: Back; Spout Type: Standard; Inlet Pipe Size: 1/2 in; Design: Two Handle; Inlet Gender: Female; Handle Type: Lever; Maximum Flow Rate: 2.2; Mounting Centers: 8; Material: Cast Bras
• Extension Tap: 10-32, 3 Flutes, TiCN Finish, Cobalt, Long Reach 2-3 P, 5.51″ OAL, 0.591″ Thread Length, 2B & 3B Class of Fit
• Threading Insert:27 Size, TQS Style, TT9080 Grade, Solid Carbide Coated Finish, 16 TPI, Series TQS27
• Floor Cleaner: 1 gal Bottle, Use On Floors Hard Floor Care
• Compression Spring: 2.233″ OD, 9.5″ Free Length 0.225″ Wire Dia, 172.361 lb Max Load, 34.579 lb/in Spring Rate, Music Wire
• Plastic Sheet: Acetal, 3/32″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Threading Insert:27 Size, TQS Style, TT9080 Grade, Solid Carbide Coated Finish, 24 TPI, Series TQS27
• Plastic Sheet: Acetal, 3/32″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Threading Insert:27 Size, TQS Style, TT9080 Grade, Solid Carbide Coated Finish, 18 TPI, Series TQS27
• Plastic Sheet: Compressible Expanded Polytetrafluoroethylene, 1/16″ Thick, 15″ Long, White, 2,400 psi Tensile Strength 2,400 psi Tensile Strength, -410 to 500°F
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Compression Spring: 2.585″ OD, 7.5″ Free Length 201.076 lb Max Load, 51.382 lb/in Spring Rate, Music Wire
• Threading Insert:27 Size, TQS Style, TT9080 Grade, Solid Carbide Coated Finish, 12 TPI, Series TQS27
• Ceramic Tile Cleaner Concentrated Liquid Cleaner
• Miniature Turret Tool Holder: For Use with LHT-25B
• Compression Spring: 2.056″ OD, 3.75″ Free Length 0.177″ Wire Dia, 70.244 lb Max Load, 38.47 lb/in Spring Rate, Stainless Steel
• #10 Screw 2-1/2″ OAL 0.192″ ID x 5/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Threading Insert:27 Size, TQS Style, TT9080 Grade, Solid Carbide Coated Finish, 14 TPI, Series TQS27
• #10 Screw 2-1/4″ OAL 0.192″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• 3 x 6″ 6063 Aluminum Pipe Nipple Threaded, Schedule 40
• Grooving Insert: QD-NKGM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.2362″ Cutting Width, Series CoroCut QD
• Threading Insert:27 Size, TQS Style, TT9080 Grade, Solid Carbide Coated Finish, 1.10 to 3.00 mm & 8 to 23 TPI, Series TQS27
• Extra Length Drill Bit: 0.315″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 524
• Extra Length Drill Bit: 0.2717″ Dia, 130 °, High Speed Steel Uncoated, 6.102″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Size 3XL Hi-Vis Yellow High Visibility Long Sleeve Sweatshirt Fleece
• Extra Length Drill Bit: 0.2461″ Dia, 130 °, High Speed Steel Uncoated, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Jobber Length Drill Bit: 0.2323″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Single Profile Thread Mill: #2-56 to #2-64, 56 to 64 TPI, Internal & External, 3 Flutes, Solid Carbide 0.064″ Cut Dia, 1/8″ Shank Dia, 1.5″ OAL, AlTiN Nano Coated
• 6″ Dia, 150 Grit, Aluminum Oxide Fine Grade, C-Weighted, Paper Backing
• Size 2XL Hi-Vis Yellow High Visibility Long Sleeve Sweatshirt Fleece
• Extra Length Drill Bit: 0.185″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 503
• 6″ Dia, 100 Grit, Aluminum Oxide Medium Grade, C-Weighted, Paper Backing
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• 6″ Dia, 120 Grit, Aluminum Oxide Medium Grade, C-Weighted, Paper Backing
• Compression Spring: 1.937″ OD, 5.5″ Free Length 257.218 lb Max Load, 119 lb/in Spring Rate, Music Wire
• Die Drill Bit: 0.3740″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• 6″ Dia, 320 Grit, Aluminum Oxide Very Fine Grade, C-Weighted, Paper Backing
• Compression Spring: 1.351″ OD, 3″ Free Length 0.192″ Wire Dia, 128.683 lb Max Load, 149.439 lb/in Spring Rate, Stainless Steel
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Feet; Plastic Board; Polymer Plastic Upright; Barricade Width (Inch): 48; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 16.0000; Top Panel Heig
• Compression Spring: 0.999″ OD, 9″ Free Length 0.112″ Wire Dia, 41.068 lb Max Load, 9.807 lb/in Spring Rate, Stainless Steel
• 6″ Dia, 220 Grit, Aluminum Oxide Fine Grade, C-Weighted, Paper Backing
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1935; Drill Bit Size (Wire): #10; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Feet; Plastic Board; Polymer Plastic Upright; Barricade Width (Inch): 48; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 16.0000; Top Panel Heig
• 6″ Dia, 180 Grit, Aluminum Oxide Fine Grade, C-Weighted, Paper Backing
• Die Drill Bit: 25/64″ Dia, 135 °, Solid Carbide Uncoated, 1″ Flute, 2-3/4″ OAL, Series 200
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Compression Spring: 1.586″ OD, 4.5″ Free Length 0.162″ Wire Dia, 71.102 lb Max Load, 35.026 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.703″ OD, 7.5″ Free Length 192.735 lb Max Load, 47.682 lb/in Spring Rate, Music Wire
• Spade Drill Insert: 12 mm Dia, Series Z, Cobalt TiN Finish, Series T-A
• Collet Nuts & Locknuts; Product Type: Collet Nut; Collet Series: TG75; Coolant Through: No
• Compression Spring: 0.823″ OD, 5.75″ Free Length 0.135″ Wire Dia, 80.273 lb Max Load, 51.179 lb/in Spring Rate, Stainless Steel
• ER50 Spanner Wrench For Use with ER Spanner Nuts
• Replaceable Tip Drill: 0.708 to 0.744'' Drill Dia, 2.25″ Max Depth, 1'' Shank Seat Size 0.2280, Through Coolant
• Compression Spring: 1.88″ OD, 5.5″ Free Length 270.619 lb Max Load, 128.505 lb/in Spring Rate, Music Wire
• Masking Tape: 60 yd Long, 5.9 mil Thick, Tan Crepe Paper, Rubber Adhesive, 27 lb/in Tensile Strength
• Replaceable Tip Drill: 0.748 to 0.7834'' Drill Dia, 2.3593″ Max Depth, 1'' Shank Seat Size 0.2280, Through Coolant
• Dead Centers; Center Type: Half Center; Shank Type: Morse Taper; Shank Taper Size: MT4; Point Style: Center Point; Carbide-Tipped: Yes; Head Diameter (Inch): 1.24 in; Tip Diameter: 0.55 in; Overall Length: 160 mm; Tip Diameter (Inch): 0.55 in; Overall Len
• Manual Ball Valve: 3/8″ Pipe, Full Port, Stainless Steel 2-Piece, FNPT, 1,000 psi WOG
• Compression Spring: 1.939″ OD, 2.875″ Free Length 0.192″ Wire Dia, 92.038 lb Max Load, 76.653 lb/in Spring Rate, Stainless Steel
• Rotary Tool Holder Hardware; Type: Wrench; For Use With: Coolant Pipe HSK-A 63
• Compression Spring: 1.41″ OD, 2.5″ Free Length 0.207″ Wire Dia, 150.32 lb Max Load, 233.585 lb/in Spring Rate, Stainless Steel
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Compression Spring: 1.116″ OD, 7″ Free Length 0.125″ Wire Dia, 49.667 lb Max Load, 15.664 lb/in Spring Rate, Stainless Steel
• Die Drill Bit: 0.2570″ Dia, 140 °, Solid Carbide Bright Finish, 1-7/16″ Flute, 2-5/8″ OAL, Series 470
• Freeze Pop Drink: 3 oz, Pouch, Assorted, Ready-to-Drink: Yields 3 oz
• Freeze Pop Drink: 3 oz, Pouch, Lemonade, Ready-to-Drink: Yields 3 oz
• Compression Spring: 0.999″ OD, 6.75″ Free Length 0.125″ Wire Dia, 55.049 lb Max Load, 20.136 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.291″ OD, 5.5″ Free Length 225.314 lb Max Load, 86.037 lb/in Spring Rate, Music Wire
• Taper Length Drill Bit: 0.2380″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Freeze Pop Drink: 3 oz, Pouch, Orange, Ready-to-Drink: Yields 3 oz
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Grooving Insert: TDAA K10, Solid Carbide Uncoated, Neutral, 0.118″ Cutting Width, Series TDA
• 25″ Polyethylene Snow Shovel 49″ D-Grip Wood Handle
• Retractable Gel: Medium Point, Black
• Grooving Insert: TDAA K10, Solid Carbide Uncoated, Neutral, 0.157″ Cutting Width, Series TDA
• Die Drill Bit: 0.2900″ Dia, 140 °, Solid Carbide Bright Finish, 1-9/16″ Flute, 2-3/4″ OAL, Series 470
• Compression Spring: 1.116″ OD, 5.75″ Free Length 0.135″ Wire Dia, 60.947 lb Max Load, 25.845 lb/in Spring Rate, Stainless Steel
• Closed Cell Neoprene Foam: 4″ Wide, 120″ Long, Black Acrylic Adhesive Backing
• Turning Insert: CNMA643 T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/4″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMA
• Compression Spring: 2.585″ OD, 7.5″ Free Length 0.225″ Wire Dia, 149.99 lb Max Load, 33.975 lb/in Spring Rate, Music Wire
• General Purpose Work Gloves: Medium, 3M Thinsulate Black
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.7597; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• DNGU080304MFR-U PR1225 Carbide Turning Insert Megacoat Finish, RH, 7mm Inscribed Circle, 0.4mm Corner Radius, 3.18mm Thick, 55° Diamond
• Plastic Sheet: Polytetrafluoroethylene, 1/2″ Thick, Off-White Shore D-55
• MIG Welder Wire Liner: 0.035 to 0.045″ Wire Dia, 10, 12 & 15' Long
• Ink Cartridge: Cyan Magenta & Yellow Use with HP OfficeJet All-In-One 6954, 6958, 6,962 & OfficeJet Pro All-In-One 6960, 6968, 6970, 6974, 6975, 6,978
• DNGU080304MFP-SK Carbide Turning Insert Megacoat Finish, Neutral, 7mm Inscribed Circle, 0.4mm Corner Radius, 3.18mm Thick, 55° Diamond
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 14.00; Drill Diameter (Decimal Inch): 0.5512; Maximum Drill Diameter (Decimal Inch): 0.5512; Drill Diameter (mm): 14.00; Maximum Drill Depth (Decimal Inch): 1.2402; Maximum Drill Dep
• Kyocera DNGU22205U PR1725 Grade PVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Right-Hand Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 14.00; Drill Diameter (Decimal Inch): 0.5512; Maximum Drill Diameter (Decimal Inch): 0.5512; Drill Diameter (mm): 14.00; Maximum Drill Depth (Decimal Inch): 1.2402; Maximum Drill Dep
• Kyocera DNGU 22205MFRF PR1225 Grade PVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Right-Hand Turning Insert for Light Interruption and Finishing in (M) Stainless Steel and (P) Carbon/Alloy Steel
• Compression Spring: 1.175″ OD, 2.625″ Free Length 0.192″ Wire Dia, 145.737 lb Max Load, 244.914 lb/in Spring Rate, Stainless Steel
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 14.00; Drill Diameter (Decimal Inch): 0.5510; Maximum Drill Diameter (Decimal Inch): 0.5510; Drill Diameter (mm): 14.00; Maximum Drill Depth (Decimal Inch): 1.2400; Maximum Drill Dep
• Shrink-Fit Setting Pot: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with ISG1000, ISG2200, ISG3200, ISG3410TLK, ISG3410TLK4A
• Plastic Bar: Nylon 6/6, 3/4″ Thick, Off-White
• Welded Bandsaw Blade: 7' 9″ Long, 3/4″ Wide, 0.035″ Thick, 5 to 7 TPI Bi-Metal, Toothed Edge
• Wheel Brush: 6-7/8″ Wheel Dia, Knotted Steel, 9,000 RPM
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..43.; Toolholder Style: TCLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Compression Spring: 1.586″ OD, 7″ Free Length 0.225″ Wire Dia, 236.672 lb Max Load, 92.71 lb/in Spring Rate, Music Wire
• Welded Bandsaw Blade: 7' 9″ Long, 3/4″ Wide, 0.035″ Thick, 8 to 11 TPI Bi-Metal, Toothed Edge
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..43.; Toolholder Style: TCLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Hex Head Cap Screw: 1/4-20 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Compression Spring: 2.526″ OD, 9.5″ Free Length 0.207″ Wire Dia, 121.552 lb Max Load, 20.56 lb/in Spring Rate, Music Wire
• Buna-N Foam: 36″ Wide, 36″ Long, Black Plain Backing
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 14.00; Drill Diameter (Decimal Inch): 0.5510; Maximum Drill Diameter (Decimal Inch): 0.5510; Drill Diameter (mm): 14.00; Maximum Drill Depth (Decimal Inch): 1.2400; Maximum Drill Dep
• Compression Spring: 2.585″ OD, 5.5″ Free Length 201.076 lb Max Load, 69.365 lb/in Spring Rate, Music Wire
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 1.00; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Left Hand; Lead Angle: 20; Relief An
• Replaceable Drill Tips
• Shrink-Fit Tool Holder & Adapter: 9/64″ Shank Dia, Taper Shank 3.15″ Projection, 0.26″ Nose Dia, Through Coolant
• MIG Welding Wire: 0.025″ Dia 12.5 lb
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.00; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.79; Prima
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Left Hand; Lead Angle: 0; Relief Angle:
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: TWLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Compression Spring: 2.585″ OD, 9.5″ Free Length 0.207″ Wire Dia, 118.89 lb Max Load, 19.866 lb/in Spring Rate, Music Wire
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.90; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.64; Pri
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 0.70; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 16; Relief A
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: TDJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank
• Compression Spring: 1.939″ OD, 7″ Free Length 0.225″ Wire Dia, 196.767 lb Max Load, 60.475 lb/in Spring Rate, Music Wire
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.50; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.75; Prima
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 20; Relief A
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 50 mm Usable Length 105.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.90; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.75; Pri
• Compression Spring: 1.351″ OD, 5.5″ Free Length 0.148″ Wire Dia, 65.078 lb Max Load, 26.843 lb/in Spring Rate, Stainless Steel
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 0.70; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Right Hand; Lead Angle: 0; Relief Angle
• Replaceable Tip Drill: 12.5 to 12.9 mm Drill Dia, 44 mm Max Depth, Modular Connection Shank Uses ICP Inserts, 86 mm OAL, Through Coolant
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.40; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.79; Prima
• Compression Spring: 0.764″ OD, 6.75″ Free Length 0.125″ Wire Dia, 70.117 lb Max Load, 36.944 lb/in Spring Rate, Stainless Steel
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 0.70; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Left Hand; Lead Angle: 0; Relief Angle:
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Replaceable Tip Drill: 14 to 14.4 mm Drill Dia, 50.2 mm Max Depth, Modular Connection Shank Uses ICP Inserts, 92.15 mm OAL, Through Coolant
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.20; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.79; Prima
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 0.50; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Left Hand; Lead Angle: 0; Relief Angle:
• Replaceable Tip Drill: 13 to 13.4 mm Drill Dia, 46.6 mm Max Depth, Modular Connection Shank Uses ICP Inserts, 88.6 mm OAL, Through Coolant
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.60; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.75; Pri
• 2-Way Manual Ball Valve: 1″ Pipe, Full Port FNPT x FNPT
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 0.50; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Left Hand; Lead Angle: 0; Relief Angle:
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 80, Plain Backing
• Compression Spring: 2.703″ OD, 5.5″ Free Length 192.735 lb Max Load, 64.371 lb/in Spring Rate, Music Wire
• Replaceable Tip Drill: 13.5 to 13.9 mm Drill Dia, 48.6 mm Max Depth, Modular Connection Shank Uses ICP Inserts, 90.6 mm OAL, Through Coolant
• Pipe Fitting: 3/4 x 3/4″ Fitting, 316 Stainless Steel 4,600 psi
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.80; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.75; Pri
• Spiral Flute Tap: #4-40, UNC, 2 Flute, Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish 0.5625″ Thread Length, 1.875″ OAL, Right Hand Flute, Right Hand Thread, H2, Series SFGP
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 12; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 0.50; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 16; Relief A
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: TWLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Traffic Barrels, Delineators & Posts; Type: Vertical Panel; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 14-3/4; Additional Information: Sheeting Grade: Diamond; Stripe Width: 4 in; Series: 4100; Subbrand: Gemstone ™; Sign Dime
• Plastic Bar: Garolite, 1-1/4″ Thick, Yellow
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.70; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.75; Pri
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Compression Spring: 1.351″ OD, 2.5″ Free Length 0.207″ Wire Dia, 156.182 lb Max Load, 258.894 lb/in Spring Rate, Stainless Steel
• Spade Drill Insert: 18 mm Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.80; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.64; Pri
• Compression Spring: 1.293″ OD, 8.5″ Free Length 0.207″ Wire Dia, 226.369 lb Max Load, 85.687 lb/in Spring Rate, Music Wire
• Spade Drill Insert: 19.5 mm Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• Hex Head Cap Screw: 7/16-20 x 4-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCRNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.70; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.64; Pri
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCRNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Compression Spring: 1.586″ OD, 3.5″ Free Length 0.177″ Wire Dia, 89.796 lb Max Load, 64.461 lb/in Spring Rate, Stainless Steel
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.30; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.79; Prima
• Spade Drill Insert: 21 mm Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: TDJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank W
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 3/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Compression Spring: 1.528″ OD, 7″ Free Length 0.225″ Wire Dia, 244.756 lb Max Load, 101.168 lb/in Spring Rate, Music Wire
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.10; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.79; Prima
• Spade Drill Insert: 15/16″ Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 3/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch)
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.60; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.64; Pri
• Compression Spring: 1.586″ OD, 5.75″ Free Length 0.148″ Wire Dia, 55.936 lb Max Load, 19.453 lb/in Spring Rate, Stainless Steel
• Spade Drill Insert: 24 mm Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: XN..3.53.5.; Toolholder Style: TXJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.2500; Drill Bit Size (Inch): 1/4; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 4; Overall Length (Inch): 4;
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.50; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HCP; Coating Process: PVD; Insert Seat Size: 4; Functional Length (mm): 2.64; Prima
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: XN..3.53.5.; Toolholder Style: TXJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank W
• Spade Drill Insert: 19.84 mm Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• Compression Spring: 1.41″ OD, 5.5″ Free Length 0.148″ Wire Dia, 62.518 lb Max Load, 24.862 lb/in Spring Rate, Stainless Steel
• Single Profile Thread Mill: 1/4-20 to 1/4-56, 20 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1910; Drill Bit Size (Wire): #11; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal Inch
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: XN..2.73.; Toolholder Style: TXJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Wi
• Spade Drill Insert: 21.43 mm Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• Diamond Pattern Router Bit: 1.125″ LOC, 3/8″ Shank Dia, Drill Point 2-1/2″ OAL, Solid Carbide, Bright/Uncoated
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1875; Drill Bit Size (Inch): 0.1875; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal I
• Compression Spring: 2.056″ OD, 7″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 54.076 lb/in Spring Rate, Music Wire
• Disposable Gloves: Polyurethane-Coated, Nylon White, Smooth
• 1/2″ Screw 3/32″ OAL 0.505″ ID x 1″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: WN..43.; Toolholder Style: TWLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Spade Drill Insert: 23 mm Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• 1/4″ Screw 1-3/4″ OAL 0.252″ ID x 5/8″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: WN..43.; Toolholder Style: TWLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Manual Edge Clamps; Overall Length (Inch): 1.93 in; 49.02 mm; Overall Length (mm): 49.02; Overall Length (Decimal Inch): 1.9300; Overall Width: 1.375 in; Overall Height: 13.43 in; 21.34 mm; 0.84 in; Travel (Inch): 0 in; Width (Inch): 1-3/8; Width (mm): 34
• Hex Head Cap Screw: 1/4-28 x 2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: XN..2.73.; Toolholder Style: TXJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Wid
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 3.98; Overall Length (mm): 3.98; Material: Metal; Projection: 1.43 in; Finish/Coating: Satin Nickel; Maximum Load Capacity: 5.00; Minimum Order Quantity: Metal; Material: Metal
• 8.5mm Minor 12mm Major 25.5mm Step Length 140° High Performance Solid Carbide Subland Step Drill Bit AlTiN & TiSiAlCrN Finish, 55mm Flute Length, 102mm OAL, Series DC260-03
• Traffic Barrels, Delineators & Posts; Type: Traffic Drum; Material: LDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 39.7; Width (Inch): 23-1/2; Additional Information: Sub Brand: Commander ™; Sheeting Grade: Engineer; Rubber Base Sold Separately;
• Plastic Bar: Acrylonitrile Butadiene Styrene, 1″ Thick, Beige Rockwell R-105
• Clear Blue Pot and Pan Detergent Pot & Pan Detergent
• 600 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 3/8″ Wide x 6″ Long x 3/8″ Thick
• Die Drill Bit: 23/64″ Dia, 135 °, Solid Carbide Uncoated, 1″ Flute, 2-1/2″ OAL, Series 200
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• DOT Placards & Holders
• Compression Spring: 2.82″ OD, 5.5″ Free Length 185.113 lb Max Load, 60.096 lb/in Spring Rate, Music Wire
• 25 Watt, 120-277V, LED Wall Pack Light Fixture Acrylic Lens, Steel Housing
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Single Profile Thread Mill: #8-32 to #8-36, 32 to 36 TPI, Internal & External, 4 Flutes, Solid Carbide 0.12″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, Bright/Uncoated
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Single Profile Thread Mill: #10-24 to #10-56, 24 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.135″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, Bright/Uncoated
• Single Profile Thread Mill: 1/4-20 to 1/4-56, 20 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, Bright/Uncoated
• Thread Forming Tap: DIN 2174, 5HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Stitched Job Ticket Holders, 11″ x 8 1/2″, Black, 25/Case
• Plastic Sheet: Acetal, 1/4″ Thick, White Rockwell M-90
• Anti-Fatigue Modular Tile Mat: Dry Environment, 18″ Length, 18″ Wide, 1″ Thick, Interlocking Edge, Yellow Vinyl Base, Polyvinylchloride Surface, Raised Squares & Domes, Grit Coating, Series A1
• Spade Drill Insert: 19 mm Dia, Series 1, Super Cobalt AM200 Finish, Series 1
• Hex Head Cap Screw: 7/8-9 x 5-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Insert Bearings; Outside Diameter: 47 mm; Outside Diameter (Inch): 47 mm; Outside Diameter (Decimal Inch): 47 mm; Cage Material: Stainless Steel; Overall Width (Inch): 31; Width (mm): 31; Race Width: 16.0000; Bearing Bore Diameter: 0.625 in; Dynamic Load
• Mold Stain & Mildew Stain Remover Mold Stain & Mildew Stain Remover
• Compression Spring: 1.175″ OD, 2.25″ Free Length 0.207″ Wire Dia, 176.487 lb Max Load, 422.367 lb/in Spring Rate, Stainless Steel
• Closed Cell Neoprene Foam: 36″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Insert Bearings; Outside Diameter: 47 mm; Outside Diameter (Inch): 47 mm; Outside Diameter (Decimal Inch): 47 mm; Cage Material: Stainless Steel; Overall Width (Inch): 31; Width (mm): 31; Race Width: 16.0000; Bearing Bore Diameter: 0.5 in; Dynamic Load Ca
• Bag & Cube Air Filters; Filter Type: Pocket Filter; Nominal Height (Inch): 24; Nominal Width (Inch): 12; Nominal Depth (Inch): 10; Integrated Frame: Yes; Particle Capture Efficiency (%): 40-45; MERV Rating: 11; Nominal Depth: 10 in; Media Material: Synthe
• Taper Shank Drill Bit: 0.3937″ Dia, 1MT, 118 °, Cobalt Oxide Finish, 3.4252″ Flute Length, 6.6142″ OAL, Cone Relief Point, Spiral Flute
• Black Tee: 1″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Buna-N Tube: 1/2″ ID, 5/8″ OD, Standard Roll 50' 25 Max psi, Black
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 1.3772 in; Inside Diameter (mm): 20 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 1.3772 in; Inside Diameter (mm): 20 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 40' Long x 20' Wide, 5 mil Polyethylene, Rectangle
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 35.042 mm; Inside Diameter (mm): 20 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibil
• Helical Flute Thread Mill: 1/2-14 to 3/4-14, Internal & External, 4 Flute, 1/2″ Shank Dia, Solid Carbide 14 TPI, 0.495″ Cut Dia, 7/8″ LOC, 3-1/2″ OAL, AlTiN Coated
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 40' Long x 20' Wide, 5 mil Polyethylene, Rectangle
• Compression Spring: 1.586″ OD, 5.5″ Free Length 315.419 lb Max Load, 191.955 lb/in Spring Rate, Music Wire
• Thread Forming STI Taps; Thread Size (mm): #2-56 in; Thread Size (Inch): #2-56 in; #2-56; Thread Limit: H3; Class of Fit: 2B; Chamfer: Semi-Bottoming; Finish/Coating: TiCN; Thread Standard: UNC; Shank Diameter (Decimal Inch): 0.1410 in; 0.1410; Square Siz
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 40' Long x 20' Wide, 5 mil Polyethylene, Rectangle
• Compression Spring: 1.645″ OD, 7.5″ Free Length 0.135″ Wire Dia, 42.251 lb Max Load, 10.139 lb/in Spring Rate, Stainless Steel
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Compression Spring: 1.939″ OD, 3.5″ Free Length 0.177″ Wire Dia, 74.281 lb Max Load, 45.529 lb/in Spring Rate, Stainless Steel
• Torque Screwdriver: 1.7 to 3.5 N ™m Torque
• Black Reducing Coupling: 1-1/2 x 1″, 125 psi, Threaded Cast Iron, Black Finish, Class 125