Products

• Plastic Sheet: Garolite, 1/32″ Thick, Yellow, 36,000 psi Tensile Strength Rockwell M-110
• Compression Spring: 2.409″ OD, 5″ Free Length 214.928 lb Max Load, 87.188 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 20.00 mm Dia, 40.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Compression Spring: 1.586″ OD, 7″ Free Length 0.135″ Wire Dia, 43.754 lb Max Load, 11.501 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.703″ OD, 7″ Free Length 0.225″ Wire Dia, 143.723 lb Max Load, 34.132 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 20.00 mm Dia, 40.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Taper Length Drill Bit: 0.7656″ Dia, 118 ° Black Oxide Finish, 6″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Compression Spring: 2.526″ OD, 5″ Free Length 205.519 lb Max Load, 80.19 lb/in Spring Rate, Music Wire
• Compression Spring: 1.293″ OD, 8″ Free Length 0.207″ Wire Dia, 226.369 lb Max Load, 91.335 lb/in Spring Rate, Music Wire
• Traffic Traffic Cone
• Compression Spring: 0.764″ OD, 9″ Free Length 0.105″ Wire Dia, 44.27 lb Max Load, 12.992 lb/in Spring Rate, Stainless Steel
• Miter Saws; Bevel: Double; Sliding: Yes; Blade Diameter Compatibility: 12; Maximum Speed: 3200 RPM; Maximum Bevel Angle - Left: ™0 ™ to 48 ™ ™; Maximum Bevel Angle - Right: ™0 ™ to 48 ™ ™; Positive Stops - Left: 0 ™, 15 ™, 22.5 ™, 31.6 ™, 45 ™ and 60 ™;
• Compression Spring: 0.823″ OD, 4.5″ Free Length 0.148″ Wire Dia, 101.794 lb Max Load, 101.657 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TDITT K10, Solid Carbide Uncoated, Neutral, 0.157″ Cutting Width, Series TDIT-E (Full Radius)
• #4-40, 2.0619″ OAL, 3/16″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 1-7/8″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 6/6, Uncoated
• Sheet: Natural Rubber, 1″ Thick, 24″ Wide, 36″ Long, Tan Durometer 40, Plain Backing
• Ball End Mill: 0.01″ Dia, 0.05″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Threading Insert:4 Size, TDGX Style, TT9080 Grade, Solid Carbide Coated Finish, 0.45 to 3.50 mm & 8 to 48 TPI, Series TDGX
• Corner Chamfer End Mill: 25.00 mm Dia, 55.00 mm LOC, 8 Flute, 0.08 mm Chamfer Width, Solid Carbide
• Compression Spring: 1.469″ OD, 3.25″ Free Length 0.177″ Wire Dia, 96.438 lb Max Load, 81.185 lb/in Spring Rate, Stainless Steel
• Reduced Shank Drill Bit: 55/64'' Dia, 1/2'' Shank Dia, 135 ™, Cobalt 6'' OAL, 3'' Flute Length, Bright/Uncoated Finish, Reduced Shank, Series 622
• Threading Insert:4 Size, TDGX Style, TT9080 Grade, Solid Carbide Coated Finish, 0.45 to 3.50 mm & 8 to 48 TPI, Series TDGX
• Compression Spring: 1.469″ OD, 6.75″ Free Length 0.135″ Wire Dia, 47.072 lb Max Load, 13.448 lb/in Spring Rate, Stainless Steel
• Die Drill Bit: 0.2420″ Dia, 140 °, Solid Carbide Bright Finish, 1-3/8″ Flute, 2-1/2″ OAL, Series 470
• Shrink-Fit Tool Holder & Adapter: HSK100A Taper Shank 8.5″ Projection, 2.76″ Nose Dia, 2.5″ Clamp Depth, Through Coolant
• Acid Neutralizer Pillow 12″ x 12″ 4/Pack
• Landscape Spreaders; Type: Tailgate; Frame Material: Stainless Steel; Spreader Type: Tailgate
• Sock: Chemical, 4' OAL, Polymer
• Compression Spring: 0.999″ OD, 3″ Free Length 0.177″ Wire Dia, 136.296 lb Max Load, 219.563 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.115″ OD, 6.5″ Free Length 0.225″ Wire Dia, 181.406 lb Max Load, 55.57 lb/in Spring Rate, Music Wire
• Compression Spring: 0.705″ OD, 9″ Free Length 0.105″ Wire Dia, 47.603 lb Max Load, 15.554 lb/in Spring Rate, Stainless Steel
• Manual Ball Valve: 3″ Pipe, Full Port, Stainless Steel 2-Piece, FNPT, 1,000 psi WOG
• Indexable Insert Drills; Drill Style: GTADP; Maximum Drill Diameter (Inch): 23/32; Drill Diameter (Decimal Inch): 0.7180; Maximum Drill Diameter (Decimal Inch): 0.7180; Drill Diameter (Inch): 23/32; Maximum Drill Depth (Decimal Inch): 18.8200; Maximum Dri
• Indexable Insert Drills; Drill Style: GTADP; Maximum Drill Diameter (Inch): 47/64; Drill Diameter (Decimal Inch): 0.7340; Maximum Drill Diameter (Decimal Inch): 0.7340; Drill Diameter (Inch): 47/64; Maximum Drill Depth (Decimal Inch): 18.8200; Maximum Dri
• Grooving Insert: TDXTT CT3000, Cermet Uncoated, Neutral, 0.157″ Cutting Width, Series TDXT-E
• Grooving Insert: TDXUXU-Universal CT3000, Cermet Uncoated, Neutral, 0.157″ Cutting Width, Series TDXU-E
• Safety Goggles; Protection Type: Fire; Lens Coating Properties: Anti-Fog; Lens Features: Anti-Fog/Anti-Scratch; Eyewear Size: Universal
• Grooving Insert: TDXUXU-Universal CT3000, Cermet Uncoated, Neutral, 0.157″ Cutting Width, Series TDXU-E
• Die Drill Bit: 0.2874″ Dia, 135 °, Solid Carbide Coated, Series 200
• Compression Spring: 1.469″ OD, 8.5″ Free Length 0.135″ Wire Dia, 47.072 lb Max Load, 10.765 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 2.25″ Free Length 0.207″ Wire Dia, 144.862 lb Max Load, 241.266 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 5.25″ Free Length 325.946 lb Max Load, 222.316 lb/in Spring Rate, Music Wire
• Social Distancing Partition: 36″ OAW, 32″ OAH, Plastic, Clear Clear, Plastic, 1/8″ Thick
• Compression Spring: 0.823″ OD, 5.25″ Free Length 0.135″ Wire Dia, 80.273 lb Max Load, 56.317 lb/in Spring Rate, Stainless Steel
• Anchors, Grips & Straps; Temporary or Permanent: Permanent; Sling Connection Type: O-Ring; Material: Polyester; Galvanized Steel; Connection Type: O-Ring; Temporary/Permanent: Permanent; Capacity (Lb.): 620
• Disinfectant Toilet Bowl Cleaner with Bleach
• Anchors, Grips & Straps; Temporary or Permanent: Permanent; Sling Connection Type: O-Ring; Material: Polyester; Galvanized Steel; Connection Type: O-Ring; Temporary/Permanent: Permanent; Capacity (Lb.): 620
• Ball Grip Quick-Release Pin: T-Handle, 12 mm Pin Dia, 15 mm Usable Length 49.2 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• 1″ Screw 2-1/2″ OAL 1″ ID x 2″ OD Round Stainless Steel Circuit Board Spacers Passivated, Grade 316, Female Unthreaded
• Tire Accessories; Type: Emergency Chains; For Tire Size: 20″ Grader Tires; 21″ Earthmover Tires; 24″ Grader Tires; For Use With: Heavy Equipment; Container Size: Kit; Additional Information: 28″ overall length with hooks; 13 links of 12mm x 45mm chain, (2
• Compression Spring: 1.175″ OD, 5.25″ Free Length 0.135″ Wire Dia, 58.097 lb Max Load, 25.752 lb/in Spring Rate, Stainless Steel
• Social Distancing Partition: 72″ OAW, 24″ OAH, Clear Clear
• Windows; Frame Material: Vinyl; Window Style: Double Hung
• Corner Chamfer End Mill: 25.00 mm Dia, 55.00 mm LOC, 8 Flute, 0.08 mm Chamfer Width, Solid Carbide
• Moisture Removal, Portable & Spot Cooling Air Conditioner: 12,000 BTU, 115V, 10.5A 17-1/8″ Wide, 14-1/2″ Deep, 28-3/8″ High, 5-15P Plug
• Miter Saws; Bevel: Double; Sliding: Yes; Blade Diameter Compatibility: 10; Maximum Speed: 3600 RPM; Maximum Bevel Angle - Left: 48; Maximum Bevel Angle - Right: 48; Positive Stops - Left: 0 ™, 15 ™, 22.5 ™, 30 ™, 31.6 ™, 45 ™, and 60 ™; Positive Stops - R
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 3.1496; Drill Diameter (mm): 80.00; Maximum Drill Depth (mm): 243.00; Shank Type: Modular Connection; Shank Diameter (mm): 46.00; Drill Diameter Range (Decimal Inch): 3.0000+; Cutt
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 40, Plain Backing
• Floor Science Neutral Floor Cleaner Concentrate: 1 gal Container, Use On Hard Surfaces
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Permanent Magnetic Chucks; Shape: Rectangle; Magnet Pole Type: Standard Pole; Width/Diameter (Inch): 8; Length (Inch): 20
• Spade Drill Insert
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Corner Chamfer End Mill: 6.00 mm Dia, 21.00 mm LOC, 6 Flute, 0.03 mm Chamfer Width, Solid Carbide
• Compression Spring: 1.586″ OD, 2.625″ Free Length 0.192″ Wire Dia, 111.102 lb Max Load, 123.629 lb/in Spring Rate, Stainless Steel
• Metering Pumps; Type: Chemical; GPH: 2.5; Voltage: 110-120 VAC @ 50/60 Hz; Voltage: 110-120 VAC @ 50/60 Hz; Pressure: 150
• Corner Chamfer End Mill: 6.00 mm Dia, 21.00 mm LOC, 6 Flute, 0.03 mm Chamfer Width, Solid Carbide
• Compression Spring: 1.351″ OD, 3.25″ Free Length 0.177″ Wire Dia, 104.178 lb Max Load, 96.483 lb/in Spring Rate, Stainless Steel
• Ties & Structural Hardware; Type: Rebar
• Compression Spring: 2.585″ OD, 6.75″ Free Length 0.225″ Wire Dia, 149.99 lb Max Load, 38.019 lb/in Spring Rate, Music Wire
• Window (Cooling Only) Air Conditioner: 15,500 BTU, 230V, 6.6A 29″ Wide, 34-1/2″ Deep, 19″ High, 6-15P Plug
• Compression Spring: 1.41″ OD, 4″ Free Length 0.162″ Wire Dia, 79.395 lb Max Load, 49.279 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.88″ OD, 3.25″ Free Length 0.177″ Wire Dia, 76.495 lb Max Load, 52 lb/in Spring Rate, Stainless Steel
• Anti-Fatigue Mat: 75' Length, 9/16″ Thick, SBR Rubber Diamond Plate, Black, Dry
• Spade Drill Insert: 0.7874″ Dia, Series 1, 132 ° Point AM200 Finish, Series 1
• Compression Spring: 1.821″ OD, 3.25″ Free Length 0.177″ Wire Dia, 78.843 lb Max Load, 54.824 lb/in Spring Rate, Stainless Steel
• Spade Drill Insert: 13/16″ Dia, Series 1, 132 ° Point AM200 Finish, Series 1
• Compression Spring: 1.645″ OD, 7″ Free Length 0.135″ Wire Dia, 42.251 lb Max Load, 10.893 lb/in Spring Rate, Stainless Steel
• Spade Drill Insert: 29/32″ Dia, Series 1, 132 ° Point AM200 Finish, Series 1
• Compression Spring: 1.469″ OD, 4″ Free Length 0.162″ Wire Dia, 76.412 lb Max Load, 45.635 lb/in Spring Rate, Stainless Steel
• Welded Bandsaw Blade: 14' 2″ Long, 1″ Wide, 0.035″ Thick, 1.3 TPI Carbon Steel, Toothed Edge
• Compression Spring: 2.526″ OD, 8.5″ Free Length 0.207″ Wire Dia, 121.552 lb Max Load, 23.103 lb/in Spring Rate, Music Wire
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Compression Spring: 1.939″ OD, 3.25″ Free Length 0.177″ Wire Dia, 74.281 lb Max Load, 49.459 lb/in Spring Rate, Stainless Steel
• Thread Forming Tap: DIN 2174, 6GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Compression Spring: 1.4″ OD, 5″ Free Length 0.162″ Wire Dia, 79.924 lb Max Load, 39.984 lb/in Spring Rate, Stainless Steel
• Thread Forming Tap: DIN 2174, 7GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Plastic Sheet: Cast Acrylic, 1/2″ Thick, Clear, 8,000 psi Tensile Strength Rockwell M-95
• Masking Tape: 60 yd Long, 5 mil Thick, Green Polypropylene, Rubber Adhesive, 13 lb/in Tensile Strength
• Welded Bandsaw Blade: 19' 8-1/2″ Long, 3/4″ Wide, 0.032″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Jobber Length Drill Bit: 0.25″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Hex Head Cap Screw: 1/4-20 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Corner Chamfer End Mill: 7.00 mm Dia, 25.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
• Plastic Sheet: Compressible Expanded Polytetrafluoroethylene, 1/4″ Thick, 30″ Long, White, 2,400 psi Tensile Strength 2,400 psi Tensile Strength, -410 to 500°F
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, Bright/Uncoated, Corner Radius End
• Sheet: Neoprene Rubber, 12″ Wide, 24″ Long, Black Durometer 65 to 75
• 3.85mm, 165° Drill Point, 3.175mm Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Latches; Type: Spring Loaded Bar Latch; Length (mm): 63.00; Width (mm): 46.00; Height (mm): 20.0000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 37; Series: BLL; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless St
• Air Compressor & Vacuum Pump Accessories; Type: OEM Bare Pump; For Use With: 2545 Premium Compressor; Type: OEM Bare Pump; Type: OEM Bare Pump; Type: OEM Bare Pump; For Use With: 2545 Premium Compressor; Type: OEM Bare Pump
• Permanent Magnetic Chucks; Shape: Rectangle; Magnet Pole Type: Standard Pole; Width/Diameter (Inch): 10; Length (Inch): 16
• Self-Centering Manual Lathe Chuck: 4-Jaw, 9.84″ Dia Plain Back Mount, 3,500 Max RPM
• Pipe Fitting: 1-1/2 x 1-1/2″ Fitting, 304 Stainless Steel 150 psi
• Roll: Neoprene Rubber, 1″ Thick, 36″ Wide, Black Durometer 40, Plain Backing
• Penetrant & Lubricant: 55 gal Drum Amber
• Sign: Rectangle, ″COVID 19 STOP THE SPREAD OF GERMS″ Paper, Wall Mount, 24″ High, 18″ Wide
• Roll: EPDM Rubber, 36″ Wide, Black Durometer 60, Acrylic Adhesive Backing
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Sign: Rectangle, ″Use of Cloth Face Coverings to Help Slow the Spread of COVID-19″ Paper, Wall Mount, 24″ High
• Drill Heads; Series: TBTA3; Head Connection Size: BTA SI1-94; Maximum Drill Diameter (Decimal Inch): 4.0000 in; Maximum Drill Diameter (mm): 4.0000 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 6.4200 in; Drill Head Style: TBTA; Thr
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Drill Heads; Series: TBTA3; Head Connection Size: BTA SE4-82; Maximum Drill Diameter (Decimal Inch): 3.5000 in; Maximum Drill Diameter (mm): 3.5000 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 7.6000 in; Drill Head Style: TBTA; Thr
• Corner Radius End Mill: 0.065″ Dia, 0.195″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Drill Heads; Series: TBTA3; Head Connection Size: BTA SE4-94; Maximum Drill Diameter (Decimal Inch): 4.0000 in; Maximum Drill Diameter (mm): 4.0000 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 7.6000 in; Drill Head Style: TBTA; Thr
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.085″ Dia, 0.255″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Paper Towels: Hard Roll, Box, 1 Ply, Recycled Fiber, Natural 8″ Wide, 800' Roll Length
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Size XL, Leather or Synthetic Leather, Arc Flash Gloves Unlined, 23 cal/Sq cm Max Arc Protection, HRC 3, ANSI Cut Level 2, ASTM F2675
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Collet Nuts & Locknuts; Product Type: HP Collet Chuck Nut; Collet Series: HP11
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.055″ Dia, 0.165″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Hex Head Cap Screw: 3/4-10 x 5″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.085″ Dia, 0.255″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.095″ Dia, 0.285″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Plastic Sheet: Polyvinylchloride, 1/4″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Corner Radius End Mill: 0.055″ Dia, 0.165″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Open-Center Hydraulic Lathe Cylinders; Material: AC2B; SCM415; Bore Size (mm): 117.50; Piston Diameter: 250.000; Piston Push Force: 138 kN; Piston Pull Force: 126 kN; Thread Size (Metric): M130 x 2.0; Maximum Rpm: 3000.000; Maximum Operating Pressure: 4.0
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• EPDM Tube: 1″ ID x 1-1/2″ OD x 5' Long 25 Max psi, Black
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7283; Diameter (mm): 18.50; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.055″ Dia, 0.083″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Closed-Center Hydraulic Lathe Cylinders; Material: AC2B; SCM415; Piston Push Force: 193 kN; Piston Pull Force: 180 kN; Coolant Collector: No; Maximum Rpm: 5500.000; Maximum Operating Pressure: 4 kgf/cm ™; Overall Width: 24; Overall Depth: 24 in; Overall H
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Plastic Bar: Acetal, 1/4″ Thick, White
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Plastic Bar: Acetal, 1/4″ Thick, White
• Laundry Detergent; Form: Liquid; Container Size (oz.): 330.0 gal (US); Container Size: 330.0 gal (US); EPP Indicators: Biodegradable; Pre Consumer Recycled Content : 0; Total Recycled Content: 0; Post Consumer Recycled Content: 0
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Stationary Electric Air Compressors; Compressor Style: Simplex; Input Voltage: 200; Frequency: 200; Phase: 3; Tank Style: Vertical; Tank Size: 120.00; Cfm At 90 Psi: 35; Maximum RPM: 1050.000; Maximum Working Pressure (Psi - 3 Decimals): 175.000; Maximum
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 7.00 mm Dia, 25.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
• Hex Head Cap Screw: 3/8-16 x 3″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Corner Chamfer End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Heat Gun: 0 to 1200 °F 120V, 12.5A, 6' Cord
• Corner Radius End Mill: 0.095″ Dia, 0.285″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Roll: Viton Rubber, 36″ Wide, Black Durometer 75, Plain Backing
• Corner Chamfer End Mill: 0.078″ Dia, 0.234″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• NEMA 4X Stainless Steel Standard Enclosure with Cabinet Hinged Cover 36.13″ Wide x 60.13″ High x 24.13″ Deep, Corrosion Resistant & Watertight
• 1/4″ Screw 1/2″ OAL 0.252″ ID x 5/8″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• #10 Screw 1/2″ OAL 0.192″ ID x 5/8″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Corner Radius End Mill: 0.085″ Dia, 0.128″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 8.00 mm Dia, 28.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• Corner Radius End Mill: 0.059″ Dia, 0.177″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Miniature Turret Tool Holder: ER32 Collet 75 mm Projection
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Taper Length Drill Bit: 0.4219″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Corner Radius End Mill: 0.109″ Dia, 0.164″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.12″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 63.546 mm; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibil
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 63.546 mm; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatib
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 70, Acrylic Adhesive Backing
• 1/4 Inch NPT, 4,000 Max psi, Steel Case Cylinder Pressure Gauge 2 Inch Dial Diameter, All Gases
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 8.00 mm Dia, 28.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
• Sorbent Pad: Universal Use, 14″ Wide, 2 gal, Yellow Polypropylene, 0.075″ Thick
• Corner Radius End Mill: 0.095″ Dia, 0.143″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• 500 to 15,000 RPM, 0.33 Hp, Foot Adjustment Interface, Flexible Shaft Grinder
• Tool & Cutter Grinding Wheels; Wheel Type: Cup Wheel; Wheel Diameter (Inch): 5 in; Abrasive Material: Diamond; Grade: Super Fine; Grit: 0; Maximum Rpm: 12000.000; Face Width (Inch): 0.25 in; Hole Thread Size: 5/8-11
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 9.00 mm Dia, 30.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.025″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Power Torque Wrenches; Type: Square Drive Hydraulic Torque Wrench; Maximum Ft Lbs: 3225; Drive Size: 1; Series: S-Series; Power Source: Hydraulic
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 40, High Temperature Adhesive Backing
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Micro Drill Bit: 0.0925″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Self-Centering Vise: 6″ Jaw Width, 3-1/2″ Max Jaw Opening Manual, 15-3/4″ OAL, 13″ OAW, 22.56″ OAH, 10,100 lbf Max Clamping Force
• Corner Chamfer End Mill: 9.00 mm Dia, 30.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 2.5 mm Cutting Width, 5 mm Max Depth
• Micro Drill Bit: 0.0965″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0886″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Self-Centering Vise: 6″ Jaw Width, 3-1/2″ Max Jaw Opening Manual, 19.68″ OAL, 13″ OAW, 22.56″ OAH, 10,100 lbf Max Clamping Force
• 0.866″ Max Depth, 0.098 to 1.732″ Width, External Right Hand Indexable Grooving/Cutoff Toolholder 4.921″ OAL, 20mm Shank Height, Uses SA 24-25\x85 Inserts, HSA Monoblock Toolholder, Through Coolant, Series SA Parting / Grooving
• Micro Drill Bit: 0.0945″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Self-Centering Vise: 6″ Jaw Width, 3-1/2″ Max Jaw Opening Manual, 19.68″ OAL, 13″ OAW, 22.56″ OAH, 10,100 lbf Max Clamping Force
• Micro Drill Bit: 0.0906″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.098″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Plastic Sheet: Garolite, 5/8″ Thick, Brown, 16,000 psi Tensile Strength Rockwell M-100
• Micro Drill Bit: 0.0976″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Turning Insert: DNGA432 AB30, Ceramic Al2O3 & TiCN Finish, Neutral, 0.6100″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Micro Drill Bit: 0.0972″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Turning Insert: DNGA432 AB20, Ceramic Al2O3 & TiCN Finish, Neutral, 0.6100″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Micro Drill Bit: 0.0969″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Ball End Mill: 0.2031″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Micro Drill Bit: 0.0961″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0957″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Spiral Point Tap: M5 x 0.8, Metric Coarse, 3 Flutes, Plug, 6H, Powdered Metal, TiCN Finish 37/64″ Thread Length, 2-3/8″ OAL, Right Hand, D4, Series 714
• Micro Drill Bit: 0.0953″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Corner Chamfer End Mill: 10.00 mm Dia, 35.00 mm LOC, 6 Flute, 0.05 mm Chamfer Width, Solid Carbide
• Micro Drill Bit: 0.0949″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Corner Chamfer End Mill: 10.00 mm Dia, 35.00 mm LOC, 6 Flute, 0.05 mm Chamfer Width, Solid Carbide
• Micro Drill Bit: 0.0941″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0933″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0929″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0921″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0917″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Stationary Electric Air Compressors; Compressor Style: Simplex; Input Voltage: 200; Frequency: 200; Phase: 3; Tank Style: Horizontal; Tank Size: 80.00; Cfm At 90 Psi: 14.9; Maximum RPM: 3510.000; Maximum Working Pressure (Psi
• O-Ring: 7-1/2″ ID x 8″ OD, 1/4″ Thick, Dash 443, HNBR Round Cross Section
• Stationary Electric Air Compressors; Compressor Style: Simplex; Input Voltage: 200; Frequency: 200; Phase: 3; Tank Style: Horizontal; Tank Size: 80.00; Cfm At 90 Psi: 12.9; Maximum RPM: 3510.000; Maximum Working Pressure (Psi - 3 Decimals): 150.000; Maxim
• Micro Drill Bit: 0.0913″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0909″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0902″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Penetrant & Lubricant: 275 gal Tote Non-Food Grade
• Micro Drill Bit: 0.0898″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Fixture Columns; Column Shape: T-Style; Square Size: 500.0; Overall Height: 650 mm; Base Width: 500 mm; Material: Cast Iron; Overall Height (Inch): 650 mm; Base Width (Decimal Inch): 500 mm; Base Length (mm): 500.0000; Base Thickness (Decimal Inch): 25.00
• Micro Drill Bit: 0.0894″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Corner Chamfer End Mill: 12.00 mm Dia, 45.00 mm LOC, 6 Flute, 0.05 mm Chamfer Width, Solid Carbide
• Micro Drill Bit: 0.089″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0937″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462