Products

• Cordless Screwdrivers: Handle Type: Ergonomic; Voltage: 3.60; Speed (RPM): 0 to 450; Batteries Included: Yes
• Jacobs - MT5 Inside Morse Taper, MT5 Outside Morse Taper, Extension Morse Taper to Morse Taper
• Battery-Operated Bolt Cutter, Steel, 4 Ah
• Battery-Operated Bolt Cutter, Steel, 2 Ah
• Battery-Operated Crimper, D3 Groove, 4 Ah
• Battery-Operated Crimper, O+ Die Head, 4 Ah
• Battery-Operated Crimper, BG Die/D3 Groove, 4 Ah
• Battery-Operated Cutter, ACSR, 4 Ah
• Battery-Operated Crimper, D3 Groove, 2 Ah
• Battery-Operated Crimper, O+ Die Head, 2 Ah
• Battery-Operated Crimper, BG Die/D3 Groove, 2 Ah
• Battery-Operated EHS Closed-Jaw Cutter, 4 Ah
• Battery-Operated Cutter, ACSR, 2 Ah
• Battery-Operated Cutter, Cu/Al, 4 Ah
• Battery-Operated EHS Closed-Jaw Cutter, 2 Ah
• Battery-Operated Cutter, Cu/Al, 2 Ah
• Chicago® Grip - Dual Conductor Trans
• 25 Pieces Master Electrician's Torque Wrench Set
• Grip for Large Diameter Conductors
• Battery-Operated Cutter/Crimper, No Heads, 4 Ah
• Battery-Operated Cu/Al Closed-Jaw Cutter, 2 Ah
• Battery-Operated Cutter/Crimper, No Heads, 2 Ah
• Chicago® Grip for Conductors 25k Lb Load
• Battery-Operated Cutter/Crimper, Tool Only
• Chicago® Grip for Conductors 20k Lb Load
• General Purpose 1000V Insulated Tool Kit 22 Pieces
• Chicago® Grip Bell-System Type H Grip
• Heavy Duty Ratcheting Cutter
• Replacement Blades, ACSR Open-Jaw Cutter
• Chicago Grip, 0.75 to 1″ High Strength Cables
• Replacement Blades, Cu/Al Open-Jaw Cutter
• Chicago® Grip for Large Diameter Conductors
• Grip for High Strength Cables 0.5 to 0.75″
• 1000V Insulated Utility Tool Kit in Hard Case, 13 Pieces
• 90-Degree Impact Wrench, Full Kit
• Grip for High Strength Cables 0.62″
• TOOL KIT 41PC
• Replacement Blades, ACSR Closed-Jaw Cutter
• 1000V Insulated Utility Tool Kit in Roll Up Pouch, 13 Piece
• ACSR Ratcheting Cable Cutter
• TESTER W/TEST-N-MAP_REMOT
• Chicago® Grip Bell-System Type Grip
• Parallel Jaw Grip, 0.7 to 1.3″ HDPE Wire
• Chicago® Grip Coated Guy Wire with Chain
• Grip for High Strength Cable
• 90-Degree Impact Wrench, Tool Only
• ‎TCS15 200-234-6
• Web-Strap Ratchet Hoist with Hot Rings
• Replacement Blades, Cu/Al Closed-Jaw Cutter
• Cutting Jaw, Steel
• Chicago® Grip Type B Strand Puller
• Parallel Jaw Grip - Lock, HDPE Wire to 1.362″
• Web-Strap Hoist Deluxe with Removable Handle
• Cable Test Kit with Commander™ VDV Tester, Remotes, Adapter, and Case
• 1" 5 Flute Standard Carbide End Mill-TiAlN
• Cutting Jaw, ACSR
• Chicago Grip, Forged, Hot-Line, 0.74 to 0.86″
• Chicago Grip, Forged, Hot-Line, 0.86 to 0.96″
• 1" 5 Flute Long Carbide End Mill-TiAlN
• Chicago® Grip for PVC-Covered Conductors
• Chicago Grip, Forged, Hot-Line, 0.53 to 0.74″
• Chicago® Grip Coated Guy Wire
• Parallel Jaw Grip, HDPE Wire to 1.362″
• Grip for PVC-Covered Conductors 0.79″
• Compact Ratcheting Cable Cutter
• Premium 1000V Insulated Tool Kit, 8 Pieces
• Case for Insulated Tool Kit 33527
• Parallel Jaw Grip for Coated Guy Strand
• 1" 4 Flute Standard Carbide End Mill-TiN/TiAlN
• ‎TCP15 125-175-5
• WEB STRAP RATCHET HOIST
• 1" 5 Flute Standard Carbide End Mill-TiAlN
• Basic 1000V Insulated Tool Kit, 1000-Volt, 8 Pieces
• Cutting Jaw, Cu/Al
• ‎Knurled Parallel Jaw Grip 4-3/8″ Length
• Broad Range Non-Contact Voltage Tester
• ‎Parallel Jaw Grip, 4-3/8″ Length
• Chicago® Grip with Latch 0.96″ Capacity
• Chicago® Grip for Weatherproof Wire
• Chicago® Grip with Latch 0.86″ Capacity
• Chicago® Grip with Latch 0.37″ Cable
• Chicago Grip, Forged, Hot-Line, .218 to .55″
• 7/16 IMPACT WRENCH KIT
• ‎TBNC-40M-250WT30
• Chicago® Grip with Latch 0.74″ Capacity
• Grip for Weatherproof Wire 0.74″ Capacity
• Knurled Jaw Grip 3/4″ Cable Capacity
• RATCHET ACSR CABLE CUTTER
• Chicago® Grip for Bare Wire 0.8 to 0.9″
• Brass Sledge Hammer, Rubber Handle, 14 lb
• TOOL KIT 28PC
• 20mm 4 Flute Standard Carbide End Mill-TiAlN
• 1" 4 Flute Standard Carbide End Mill .030 Radius-AlCr
• 1" 4 Flute Standard Carbide End Mill .060 Radius-AlCr
• 1" 4 Flute Standard Carbide End Mill .040 Radius-AlCr
• 1" 4 Flute Standard Carbide End Mill .030 Radius-AlCr
• 1" 4 Flute Standard Carbide End Mill .040 Radius-AlCr
• 1" 4 Flute Standard Carbide End Mill .060 Radius-AlCr
• 3/4 8 Flute Standard Carbide End Mill .050 Radius-TiAlN
• Parallel Jaw Grip, 3/4″ Cable Capacity
• Curved Jaw Grip for EHS Cable with Latch
• Grip for High Strength Cables 0.218″
• Chicago® Grip for Bare Wire .7 to .8″
• RATCHET CBL CUT 1000 MCM
• 3/4 4 Flute Standard Carbide End Mill-TiAlN
• Case for Utility Tool Kit 33525
• Chicago® Grip for EHS Cable, Curved Jaw
• Grip for High Strength Cables 0.55″
• 20mm 4 Flute Long Carbide End Mill-TiAlN
• Pulling Grip 32″ Mesh, 3.5 to 4″ Diameter
• Crimping Jaw, Fixed BG Die/D3 Groove
• Crimping Jaw, D3 Groove
• Crimping Jaw, Fixed O Die/D3 Groove
• Chicago® Grip for Bare Wire 0.5 to 0.7″
• ‎Haven's® Grip Wire Pulling Tool, 1-1/4″
• ‎LNFL 200-54 API
• 3/4 4 Flute Long Carbide End Mill-TiAlN
• ‎Parallel Jaw Grip 4-1/2″ Length
• Parallel Jaw Grip 4801 Series with Hot Latch/Spring
• Parallel Jaw Grip 4802 Series with Hot Latch
• Parallel Jaw Grip 4800 Series
• ‎TBNSC-125-10WS1250
• Battery-Operated Compact Impact Wrench, 1/2″ Detent Pin, Full Kit
• Battery-Operated Compact Impact Driver, 1/4″ Hex Drive, Full Kit
• Full Floating Body Belt 46″ to 54″
• Full Floating Body Belt 45″ to 53″
• Full Floating Body Belt 34″ to 42″
• Full Floating Body Belt 37″ to 45″
• Full Floating Body Belt 44″ to 52″
• Full Floating Body Belt 33″ to 41″
• Full Floating Body Belt 42″ to 50″
• Full Floating Body Belt 38 to 46″
• Full Floating Body Belt 47″ to 55″
• Full Floating Body Belt 36″ to 44″
• Full Floating Body Belt 32″ to 40″
• Full Floating Body Belt 41″ to 49″
• Full Floating Body Belt 40″ to 48″
• Full Floating Body Belt 48″ to 56″
• Hydra-Cool™ Pole Climber System
• Fiberglass Fish Tape with Spiral Leader, 200-Foot
• 18 Pieces Journeyman Tool Set
• 20mm 4 Flute Standard Carbide End Mill-TiAlN
• 3/4 8 Flute Stub Carbide End Mill .050 Radius-TiAlN
• Replacement Blade, ACSR Cutting Head
• POLE CLIMB W/1 9/16 GAFFS
• ‎TREECLIMB 2 3/4 GAF 17-21
• Brass Sledge Hammer, Rubber Handle, 10 lb
• Pole Climber Set, Gaffs 17″ to 21″
• ‎Pole Climbers with 1-9/16″ Gaffs, Complete Set
• ‎Pole Climbers with 1-1/2″ Gaffs, Complete Set
• Parallel Jaw Grip with Hot Latch
• 20mm 4 Flute Standard Carbide End Mill-TiN/TiAlN
• ‎TFM-7-16M-85C
• Pulling Grip for 3 to 3.5″ Diameter 30″
• 3/4 4 Flute Standard Carbide End Mill-TiAlN
• ‎TREECLIMB 2 3/4 GAF 15-19
• VDV ProTech™ Data & Coaxial Kit
• Rechargeable Thermal Imager
• Eye Pulling Grips Med 2 to 2.5″ Cable
• 3/4 4 Flute Standard Carbide End Mill-TiN/TiAlN
• Chicago Grip Hot-Line 0.31 to 0.53″
• Chicago® Grip for PVC-Covered Conductors 0.42″
• 16mm 8 Flute Standard Carbide End Mill 1mm Radius-TiAlN
• 5/8 4 Flute Standard Carbide End Mill-TiAlN
• OPEN JAW RATCHET CBL CUT
• 16mm 4 Flute Standard Carbide End Mill-TiAlN
• Pulling Grip 28″ Long, 2.5 to 3″ Diameter
• Replacement Blade, Steel Cutting Head
• Chicago Grip for PVC-Covered Conductors 0.5″
• 5/8 8 Flute Standard Carbide End Mill .050 Radius-TiAlN
• CAT50 NO 2 T/C TAP HOLDER
• 1/2″ Torque Wrench Ratchet Square Drive
• Combination Wrench Set, 14-Piece
• Compound Action Ratcheting Crimper - Insulated Terminals
• SCREWDRIVR SET TORQUE 6PC
• LT TESTER AND TEST-N-MAP
• 7/16″ Impact Wrench, Tool Only
• 16mm 4 Flute Long Carbide End Mill-TiAlN
• KNOCKOUT PUNCH W/WRENCH
• 16mm 8 Flute Stub Carbide End Mill 1mm Radius-TiAlN
• ‎Parallel Jaw Grip 2-1/2″ Length
• MSTR ELECT HOLE CUT KIT
• 5/8 4 Flute Long Carbide End Mill-TiAlN
• 20mm 4 Flute Standard Carbide End Mill 0.3mm Radius-TiAlN
• 20mm 4 Flute Standard Carbide End Mill 2mm Radius-TiAlN
• 20mm 4 Flute Standard Carbide End Mill 1.5mm Radius-TiAlN
• 20mm 4 Flute Standard Carbide End Mill 0.5mm Radius-TiAlN
• 20mm 4 Flute Standard Carbide End Mill 1mm Radius-TiAlN
• Grip, Hot-Line Latch, Bare Cable .12 to .37″
• Replacement Blade, Cu/Al Cutting Head
• 20mm 4 Flute Standard Carbide End Mill 3mm Radius-TiAlN
• 5/8 8 Flute Stub Carbide End Mill .050 Radius-TiAlN
• Chicago Grip, Forged, Hot-Line, 0.20 to 0.40″
• Screwdriver Set, 1000V Insulated Slotted and Phillips, 9-Piece
• Replacement Blades for EHS Closed-Jaw Cutter
• Deluxe Leather Bag, 24″
• ‎TBNC-12M-150WS12
• ‎TBNC-500-35WS500
• 16mm 4 Flute Standard Carbide End Mill-TiAlN
• Steel-Handle Bolt Cutter, 42″
• Pulling Grip for 2 to 2.5″ Diameter, 26″
• Scout® Pro 3 Tester with Test + Map™ Remote Kit
• Deluxe Leather Bag, 20″
• Chicago® Grip with Latch 0.53″ Capacity
• Body Belt Style #5282N, 34″ to 42″ L
• Body Belt Style #5282N, 45″ to 53″ L
• Body Belt Style #5282N, 42″ to 50″ L
• Body Belt Style #5282N, 44″ to 52″ L
• Body Belt Style #5282N, 41″ to 49″ L
• Floating Body Belt Style 5282N Size 19
• Floating Body Belt Style 5282N Size 18
• Body Belt Style #5282N, 37″ to 45″ L
• Body Belt Style #5282N, 40″ to 48″ L
• Body Belt Style #5282N, 46″ to 54″ L
• Body Belt Style #5282N, 38″ to 46″ L
• Body Belt Style #5282N, 47″ to 55″ L
• Body Belt Style #5282N, 36″ to 44″ L
• 5/8 4 Flute Standard Carbide End Mill-TiAlN
• Communications Cable Cutter
• ‎Bolt Cutter with Fiberglass Handle, 36-1/2″
• 3/4 4 Flute Standard Carbide End Mill .040 Radius-AlCr
• 3/4 4 Flute Standard Carbide End Mill .040 Radius-AlCr
• 3/4 4 Flute Standard Carbide End Mill .060 Radius-AlCr
• 3/4 4 Flute Standard Carbide End Mill .060 Radius-AlCr
• 3/4 4 Flute Standard Carbide End Mill .030 Radius-AlCr
• 3/4 4 Flute Standard Carbide End Mill .030 Radius-AlCr
• Grip for Weatherproof Wire 0.53″ Capacity
• 12 Pieces Electricians Tool Set
• Deluxe Leather Bag, 18″
• 3/8″ Torque Wrench Square Drive 14″ Length
• APPRENTICE TOOL SET 14PC
• 14 Pieces Electricians Tool Set
• ‎TFM-7-500-512HM
• TOOL MASTER ROLL TOOL BAG
• Replacement Blades for Cu / Al Closed-Jaw Cutter
• TOOL KIT 12PC
• ‎TBDC-500-59WS500
• 16mm 4 Flute Standard Carbide End Mill-TiN/TiAlN
• Replacement Cable Cutter Head for 63047
• Brass Sledge Hammer, Rubber Handle, 7 lb
• Single-Ended Impact Socket
• 5/8 4 Flute Standard Carbide End Mill-TiN/TiAlN
• INSULATED NUT DR KIT 9PC
• Eye Pulling Grips Medium Long 1 to 1.49″ Cable
• Eye Pulling Grips Med 1.5 to 2″ Cable
• SI-STHOR-2455
• SI-STHOR-244
• ‎HS40-CDHOR-8
• RATCHETING CABLE CUTTER
• Chicago® Grip with Latch 0.37″ Cable