HSK100 1 x 4.53 - Shrink Fit Tool Holder

Item #: GM94H100104539
Manufacturer: Parlec
Mfg #: H100A-10SF

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Parlec *Gage Length: 4.530 *Model Number: H100A-10SF453-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 7.2000

$401.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-80mm - Shrink Fit Holder - Slim Line

Item #: TE1231588
Manufacturer: Techniks
Mfg #: 31588

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 80mm *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*Smaller nose diameter than traditional ShrinkFIT designs *Maximum T.I.R. onlly 0.0001" *Balanced to 25,000 RPM at G2.5 tolerance *Great for finish passes where small nose diameter tooling is required *Coolant through spindle with coolant set screw comes standard *Each holder is certified for accuracy and balance and comes with it's own lab report

Shipping Info:
*Actual Weight - .1500

$289.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 16mm x 80mm Shrink Fit Chuck

Item #: HA7150840164
Manufacturer: Haimer USA LLC
Mfg #: 50.840.16.

Technical Specifications:
*Bore Diameter: 16mm *Brand Name: Haimer USA LLC *Gage Length: 80mm *Model Number: 50.840.16.4 *Outside Diameter: 34mm *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 8.5000

$515.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 16MM SHRINK FIT HOLDER

Item #: GM76500022
Manufacturer: Lyndex
Mfg #: CAT50-SF16

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$491.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/4 x 3.54 HD Shrink Fit Chuck

Item #: HA7150850114Z6
Manufacturer: Haimer USA LLC
Mfg #: 50.850.11/

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Haimer USA LLC *Gage Length: 3.54 *Model Number: 50.850.11/4Z.6 *Outside Diameter: 2.76 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.2500

$1,152.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2" Strght SH 1.0 Dia Shrink Fit Tool Ext. 7.00" Long

Item #: GM30SF050700
Manufacturer: Briney
Mfg #: SS100SF-05

Technical Specifications:
*Bearing Surface: 1.000 *Bore Diameter: 1/2 *Brand Name: Briney *Gage Length: 1.000 *Outside Diameter: 1.000 *Shank: SS *Standard: ANSI *Type: SS Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 1.5000

$265.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/8"-5" - Shrink Fit Holder with Coolblast

Item #: TE1229004B
Manufacturer: Techniks
Mfg #: 29004B

Technical Specifications:
*Bore Diameter: 1/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 3.2mm *Gage Length: 5 *Outside Diameter: 2.5 *Shank: 1/8 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1781

$293.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 50E 1/8"-80mm - Shrink Fit Holder

Item #: TE1239014E
Manufacturer: Techniks
Mfg #: 39014-E

Technical Specifications:
*Bore Diameter: 1/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 3.2mm *Gage Length: 80mm *Outside Diameter: 1.97 *Shank: 1/8 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 1.0000

$341.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2 x 3.15 Shrink Fit Chuck

Item #: HA714084012Z4
Manufacturer: Haimer USA LLC
Mfg #: 40.840.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: 40.840.1/2Z.4 *Outside Diameter: 1.26 *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 2.4000 *Dimensions - Height: 3.00 Length: 7.50 Width: 3.00

$340.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CT50-SLK12- 225 Master Holder

Item #: SG82CT50225
Manufacturer: MST
Mfg #: CT50-SLK12

Technical Specifications:
*Brand Name: MST *Flange Length: 15.95mm *Gage Length: 225mm *Model Number: CT50-SLK12- 225 *Nose Diameter: 38mm *Nose Length: 190mm *Shank: CAT50 *Tool Clearance: 69.85mm *Weight: 5.7 lbs

Description:
*Slimline profile for clearance *Versatile 2 Pc Type Design to reduce inventory *High Runout Accurace (5 Microns or better) for increased tool life *Stainless Steel Construction vs Competitors H13 allows for thin walls = more clearance *Small tools easily removed

Shipping Info:
*Actual Weight - 5.7000

$999.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/8" Strght SH .75 Dia Shrink Fit Tool Ext. 7.00" Long

Item #: GM30SF031700
Manufacturer: Briney
Mfg #: SS075SF-03

Technical Specifications:
*Bearing Surface: 1.000 *Bore Diameter: 5/16 *Brand Name: Briney *Gage Length: 1.000 *Outside Diameter: 1.000 *Shank: SS *Standard: ANSI *Type: SS Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 1.5000

$259.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 20mm x 100 - Shrink Fit Holder

Item #: TE1239150
Manufacturer: Techniks
Mfg #: 39150

Technical Specifications:
*Bore Diameter: 20mm *Brand Name: Techniks *European-DIN Tool Shank Range: 20mm *Gage Length: 100mm *Outside Diameter: 2.48 *Shank: 20mm *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 0.79

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1381

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2" CAT 50 Shrink Fit Toolholder - 5.0" Gauge Length

Item #: GM3050500
Manufacturer: Briney
Mfg #: V50SF-050-

Technical Specifications:
*Bearing Surface: 1.000 *Bore Diameter: 1/2 *Brand Name: Briney *Gage Length: 5.000 *Outside Diameter: 1.250 *Shank: CAT50 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 9.5000

$468.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1"-4" - Shrink Fit Holder

Item #: TE1229042
Manufacturer: Techniks
Mfg #: 29042

Technical Specifications:
*Bore Diameter: 1.0 *Brand Name: Techniks *European-DIN Tool Shank Range: 25.4mm *Gage Length: 4 *Outside Diameter: 2.5 *Shank: 1.0 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1.0

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2756

$263.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 5/16 x 2.56 Power Shrink Fit Chuck

Item #: HA7140845516Z3
Manufacturer: Haimer USA LLC
Mfg #: 40.845.5/1

Technical Specifications:
*Bore Diameter: 5/16 *Brand Name: Haimer USA LLC *Gage Length: 2.56 *Model Number: 40.845.5/16Z.3 *Outside Diameter: 1.06 *Shank: CAT40 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 3.0000

$453.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

12MM TRIBOS-S EXTENSION

Item #: HF80205648
Manufacturer: Schunk
Mfg #: 205648

Technical Specifications:
*Brand Name: Schunk

Description:

Shipping Info:
*Actual Weight - .9900

$463.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 x 5.12 Shrink Fit Chuck

Item #: HA71508441Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.844.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 5.12 *Model Number: 50.844.1Z.4 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 10.0000

$591.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94C40756309
Manufacturer: Parlec
Mfg #: C40-75SF63

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: C40-75SF630-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 5.0000

$294.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8-3/16X6.30"GL SHRINK EXTENSION

Item #: HA717758Z0316Z
Manufacturer: Haimer USA LLC
Mfg #: 77.5/8Z0.3

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$250.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/4 SHRINK FIT HOLDER

Item #: GM765SF0750630
Manufacturer: Lyndex
Mfg #: CAT50-SF07

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$650.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It