HSK 63A 1/2" x 3.54" - Shrink Fit Holder with Coolblast

Item #: TE1293119B
Manufacturer: Techniks
Mfg #: 93119B

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 3.54 *Outside Diameter: 2.48 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1437

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 8mm-150mm - Shrink Fit Holder

Item #: TE1229258
Manufacturer: Techniks
Mfg #: 29258

Technical Specifications:
*Bore Diameter: 8mm *Brand Name: Techniks *European-DIN Tool Shank Range: 8mm *Gage Length: 150mm *Outside Diameter: 3.88 *Shank: 8mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.31

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4268

$415.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 3/4" x 3.94" - Shrink Fit Holder with Coolblast

Item #: TE1293124B
Manufacturer: Techniks
Mfg #: 93124B

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 19.1mm *Gage Length: 3.94 *Outside Diameter: 2.48 *Shank: 3/4 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 3/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1718

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/4"-6" - Shrink Fit Holder

Item #: TE1229038
Manufacturer: Techniks
Mfg #: 29038

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 19.1mm *Gage Length: 6 *Outside Diameter: 2.5 *Shank: 3/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 3/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2893

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 6mm-150mm - Shrink Fit Holder

Item #: TE1229210
Manufacturer: Techniks
Mfg #: 29210

Technical Specifications:
*Bore Diameter: 6mm *Brand Name: Techniks *European-DIN Tool Shank Range: 6mm *Gage Length: 150mm *Outside Diameter: 2.5 *Shank: 6mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.24

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1518

$321.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8 STRT SHK 3/16 SHRINK FIT EXT

Item #: GM76502136
Manufacturer: Lyndex
Mfg #: ST62-SF018

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$192.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A x SLN 1-1/4"-4.25" - Shrink Fit Holder

Item #: TE1232964
Manufacturer: Techniks
Mfg #: 32964

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 31.8mm *Gage Length: 4.25 *Outside Diameter: 2.48 *Shank: 1-1/4 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1-1/4

Description:
*Techniks End Mill Holders are precision machined to an Industry Leading H5 standard I.D. hole tolerance *Techniks End Mills are balanced to 15,000 RPM to save spindle bearing life and the Taper is ground to AT3 standard for maximum spindle contact *Each holder is lab certified with an individual report to ensure quality

Shipping Info:
*Actual Weight - 4.4500 *Dimensions - Height: 3.00 Length: 6.00 Width: 3.00

$388.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 100A x SLN 1-1/4"-4.25" - Shrink Fit Holder

Item #: TE1232994
Manufacturer: Techniks
Mfg #: 32994

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 31.8mm *Gage Length: 4.25 *Outside Diameter: 3.94 *Shank: 1-1/4 *Standard: ISO 1940 *Type: Precision HSK End Mill Holder *USA-ANSI Tool Shank Range: 1-1/4

Description:
*Techniks End Mill Holders are precision machined to an Industry Leading H5 standard I.D. hole tolerance *Techniks End Mills are balanced to 15,000 RPM to save spindle bearing life and the Taper is ground to AT3 standard for maximum spindle contact *Each holder is lab certified with an individual report to ensure quality

Shipping Info:
*Actual Weight - .4968

$473.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 x 3.94 Power Shrink Fit Chuck

Item #: HA71508401Z3
Manufacturer: Haimer USA LLC
Mfg #: 50.840.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 3.94 *Model Number: 50.840.1Z.3 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 8.5000

$874.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-A63 3/8" Bore Dia. x 6.3 Gage Length Shrink Fit Toolholder

Item #: GM279079221
Manufacturer: Bilz
Mfg #: 9079221

Technical Specifications:
*Bearing Surface: 1.65 *Bore Diameter: 3/8" *Brand Name: Bilz *Gage Length: 6.3 *Outside Diameter: 1.34 *Shank: HSK-A63 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 3.5000

$367.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 1/8" x 3.15" - Shrink Fit Holder with Coolblast

Item #: TE1293113B
Manufacturer: Techniks
Mfg #: 93113B

Technical Specifications:
*Bore Diameter: 1/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 3.2mm *Gage Length: 3.15 *Outside Diameter: 2.48 *Shank: 1/8 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1125

$504.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 7/8 x 6.30 - Shrink Fit Tool Holder

Item #: GM94BT40886309
Manufacturer: Parlec
Mfg #: BT40-88SF6

Technical Specifications:
*Bore Diameter: 7/8 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: BT40-88SF630-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 5.0000

$316.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/4"-80mm - Shrink Fit Holder - Slim Line

Item #: TE1231548
Manufacturer: Techniks
Mfg #: 31548

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 80mm *Outside Diameter: 2.5 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*Smaller nose diameter than traditional ShrinkFIT designs *Maximum T.I.R. onlly 0.0001" *Balanced to 25,000 RPM at G2.5 tolerance *Great for finish passes where small nose diameter tooling is required *Coolant through spindle with coolant set screw comes standard *Each holder is certified for accuracy and balance and comes with it's own lab report

Shipping Info:
*Actual Weight - .1437

$289.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 7/16 x 3.54 - Shrink Fit Tool Holder

Item #: GM94BT40433549
Manufacturer: Parlec
Mfg #: BT40-43SF3

Technical Specifications:
*Bore Diameter: 7/16 *Brand Name: Parlec *Gage Length: 3.540 *Model Number: BT40-43SF354-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$241.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 1/4" x 80 - Shrink Fit Holder

Item #: TE1293115
Manufacturer: Techniks
Mfg #: 93115

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 80mm *Outside Diameter: 2.48 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1250

$289.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 1 x 6.30 - Shrink Fit Tool Holder

Item #: GM94BT40106309
Manufacturer: Parlec
Mfg #: BT40-10SF6

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: BT40-10SF630-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 5.0000

$316.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm-100mm - Shrink Fit Holder

Item #: TE1229264
Manufacturer: Techniks
Mfg #: 29264

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Techniks *European-DIN Tool Shank Range: 12mm *Gage Length: 100mm *Outside Diameter: 3.88 *Shank: 12mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.47

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4412

$336.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18mm CAT 40 Shrink Fit Toolholder - 70mm Gauge Length

Item #: GM3018M70
Manufacturer: Briney
Mfg #: V40SF-18M-

Technical Specifications:
*Bearing Surface: 31.75mm *Bore Diameter: 18mm *Brand Name: Briney *Gage Length: 2.756 *Outside Diameter: 34.93mm *Shank: CAT40 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 2.6000 *Dimensions - Height: 2.90 Length: 7.60 Width: 3.10

$270.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3-12mm Presetting Stop Clip

Item #: HA728012301
Manufacturer: Haimer USA LLC
Mfg #: 80.123.01

Technical Specifications:
*Brand Name: Haimer USA LLC *Description: 3-12mm *Model Number: 80.123.01 *Type: Presetting Stop Clip

Description:

Shipping Info:

$203.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 1/4" x 3.15" - Shrink Fit Holder with Coolblast

Item #: TE1293115B
Manufacturer: Techniks
Mfg #: 93115B

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 3.15 *Outside Diameter: 2.48 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1218

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It