Intermediate (IMC) Conduit Bushing

Item #: 95923462
Brand: Hubbell-Raco
Model #: 1177

Product Specifications
Fitting Type	Bushing
Conduit Type	Rigid/Intermediate (IMC)
Trade Size (Inch)	3-1/2 - 3
Insulation Type	NonInsulated
Connection Type	Threaded
Material	Malleable Iron

$149.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 0.874" High Speed Steel 8 Flute Chucking Reamer

Item #: 30153076
Brand: Hertel
Model #:

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

Product Specifications

Reamer Diameter (Decimal Inch) 0.8740

Reamer Material High Speed Steel

Shank Type Straight

Flute Type Straight

Overall Length (Inch) 10

Flute Length (Inch) 2-5/8

Number of Flutes 8

Minimum Shank Diameter (Decimal Inch) 0.7480

Maximum Shank Diameter (Decimal Inch) 0.7495

Over/Under Size Reamer No

Dowel Pin Reamer No

Cutting Direction Right Hand

Reamer Finish/Coating Bright

Product Specifications
Reamer Diameter (Decimal Inch)	0.8740
Reamer Material	High Speed Steel
Shank Type	Straight
Flute Type	Straight
Overall Length (Inch)	10
Flute Length (Inch)	2-5/8
Number of Flutes	8
Minimum Shank Diameter (Decimal Inch)	0.7480
Maximum Shank Diameter (Decimal Inch)	0.7495
Over/Under Size Reamer	No
Dowel Pin Reamer	No
Cutting Direction	Right Hand
Reamer Finish/Coating	Bright

$133.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - #8 Pin, 0.505" Diam, 0.3971" Small End, 7/16" Diam Straight Shank, 5-3/16" Flute, Taper Pin Reamer

Item #: 63747083
Brand: Cleveland
Model #: C24263

Features and Benefits

Straight flute reamers are the most common and used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts such as keyways and cross sections.

Product Specifications

Taper Pin Size (Number) #8

Small End Diameter (Decimal Inch) 0.3971

Reamer Diameter (Decimal Inch) 0.5050

Flute Type Straight

Shank Type Straight

Overall Length (Inch) 7-3/16

Flute Length (Inch) 5-3/16

Shank Diameter (Inch) 7/16

Cutting Direction Right Hand

Reamer Material High Speed Steel

Reamer Finish/Coating Bright

Material Application Alloy Steel; Carbon Steel; Cast Iron; Plastics

Product Specifications
Taper Pin Size (Number)	#8
Small End Diameter (Decimal Inch)	0.3971
Reamer Diameter (Decimal Inch)	0.5050
Flute Type	Straight
Shank Type	Straight
Overall Length (Inch)	7-3/16
Flute Length (Inch)	5-3/16
Shank Diameter (Inch)	7/16
Cutting Direction	Right Hand
Reamer Material	High Speed Steel
Reamer Finish/Coating	Bright
Material Application	Alloy Steel; Carbon Steel; Cast Iron; Plastics

$191.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 19/32" Diam, Straight Shank, 3-3/8" Flute, Hand Reamer

Item #: 30162432
Brand: Hertel
Model #:

Features and Benefits

Standard reamers are constructed with a fixed diameter. They are used only for holes that have a diameter equal to the reamer.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

Product Specifications

Reamer Diameter (Decimal Inch) 0.5938

Reamer Diameter (Inch) 19/32

Flute Length (Inch) 3.3800

Shank Type Straight

Variable Diameter Reamer Type None

Flute Type Straight

Flute Length (Inch) 3-3/8

Overall Length (Inch) 6-3/4

Number of Flutes 8

Cutting Direction Right Hand

Reamer Material High Speed Steel

Reamer Finish/Coating Bright

PSC Code 5133

Product Specifications
Reamer Diameter (Decimal Inch)	0.5938
Reamer Diameter (Inch)	19/32
Flute Length (Inch)	3.3800
Shank Type	Straight
Variable Diameter Reamer Type	None
Flute Type	Straight
Flute Length (Inch)	3-3/8
Overall Length (Inch)	6-3/4
Number of Flutes	8
Cutting Direction	Right Hand
Reamer Material	High Speed Steel
Reamer Finish/Coating	Bright
PSC Code	5133

$102.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

New Age Industrial - 18" Wide, 2-1/2" High, Shelf

Item #: 15976046
Brand: New Age Industrial
Model #: 1836S

Product Specifications
Type	Shelf
For Use With	New Age Poles
Width (Inch)	18
Height (Inch)	2-1/2
Length (Inch)	36
Load Capacity (Lb.)	800.000
Material	Aluminum
PSC Code	3990

$222.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Magafor - 1" Body Diam, 120°, 6" OAL, High Speed Steel Spotting Drill

Item #: 31204365
Brand: Magafor
Model #: 8119D254000

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and nonferrous materials.

Bright provides a smooth, polished finish on the tool. It increases chip flow in softer materials such as aluminum, wood and plastic.

Product Specifications

Body Diameter (Inch) 1

Body Diameter (Decimal Inch) 1.0000

Drill Point Angle 120

Spotting Drill Material High Speed Steel

Spotting Drill Finish/Coating Bright

Overall Length (Inch) 6

Flute Length (Inch) 1-3/4

Shank Diameter (Inch) 1

Drill Bit Grade General Purpose

Number of Flutes 1

Length Designation Standard

Cutting Direction Right Hand

Insertable Cutter Head No

Tapered No

Product Specifications
Body Diameter (Inch)	1
Body Diameter (Decimal Inch)	1.0000
Drill Point Angle	120
Spotting Drill Material	High Speed Steel
Spotting Drill Finish/Coating	Bright
Overall Length (Inch)	6
Flute Length (Inch)	1-3/4
Shank Diameter (Inch)	1
Drill Bit Grade	General Purpose
Number of Flutes	1
Length Designation	Standard
Cutting Direction	Right Hand
Insertable Cutter Head	No
Tapered	No

$107.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Allied Machine and Engineering - Helical Flute Thread Mills Pitch (mm): 0.75 Material: Carbide

Item #: 18419911
Brand: Allied Machine and Engineering
Model #: TM10075

Features and Benefits

Titanium aluminum nitride (TiAlN) has a higher hardness than TiN and TiCN. It is extremely heat resistant and used for high speed applications on stainless steels, nickel and titanium alloys.

Product Specifications

Helical Flute Thread Mills; Pitch (mm): 0.75 ; Material: Carbide ; Thread Size (mm): M10 ; Thread Type: Internal/External ; Shank Diameter (Decimal Inch): 0.3120 ; Number of Flutes: 4

Pitch (mm) 0.75

Material Carbide

Thread Size (mm) M10

Thread Type Internal/External

Shank Diameter (Decimal Inch) 0.3120

Number of Flutes 4

Cutting Diameter (Decimal Inch) 0.3100

Length of Cut (Decimal Inch) 0.5910

Finish/Coating TiAlN

Through Coolant NonThrough Coolant

Overall Length (Inch) 3

Thread Standard ISO

$168.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Flexaust - Vacuum & Duct Hose Inside Diameter (Inch): 3 Working Pressure (psi): 15.000

Item #: 18388801
Brand: Flexaust
Model #: 3522030025

Product Specifications

Vacuum & Duct Hose; Inside Diameter (Inch): 3 ; Working Pressure (psi): 15.000 ; Vacuum Rating: 22 ; Material: Polyolefin ; Length (Feet): 25 ; Color: Clear/Green

Inside Diameter (Inch) 3

Working Pressure (psi) 15.000

Vacuum Rating 22

Material Polyolefin

Length (Feet) 25

Color Clear/Green

Bend Radius (Decimal Inch) 3.8000

Minimum Temperature (F) -40.000

Maximum Temperature (F) 225

$159.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

PRO-SOURCE - TIG Torch Parts & Accessories Type: Power Cable Length (Feet): 25.0

Item #: 94607959
Brand: PRO-SOURCE
Model #:

Product Specifications

TIG Torch Parts & Accessories; Type: Power Cable ; Length (Feet): 25.0 ; For Use With: 18 ; PSC Code: 3438

Type Power Cable

Length (Feet) 25.0

For Use With 18

PSC Code 3438

$223.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: Lincoln Electric / Part #: ED032846

Item #: 51809580
Brand: Lincoln Electric
Model #: ED032846

Product Specifications

Wire Type Solid

Wire Diameter (Decimal Inch) 1/16 in

Tensile Strength 485

Roll Weight 1000.000

Wire Material Steel Alloy

$4,355.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - Turning Inserts Insert Style: RNMN Insert Size: 32

Item #: 14378178
Brand: Seco
Model #: 10008731

Features and Benefits

Cubic boron nitride (CBN) is similar in hardness to diamond. It is commonly used for machining hardened steel and related alloys at high temperatures.

Cubic Boron Nitride (CBN) is similar in hardness to diamond. It is commonly used for machining hardened steel and related alloys at high temperatures.

Cubic boron nitride (CBN) is similar in hardness to diamond. It is commonly used for machining hardened steel and related alloys at high temperatures.

Product Specifications

Turning Inserts; Insert Style: RNMN ; Insert Size: 32 ; Material: CBN ; Length (Inch): 0.375 ; Inscribed Circle (Inch): 0.375 ; Thickness (Inch): 0.125

Insert Style RNMN

Insert Size 32

Material CBN

Length (Inch) 0.375

Inscribed Circle (Inch) 0.375

Thickness (Inch) 0.125

Corner Radius (Decimal Inch) 0.1880

Manufacturer's Grade CK2065

Insert Length (Decimal Inch) 0.3750

Overall Length (Decimal Inch) 0.37500

ISO Number RNMN090300S-02020

Rake Negative

Rake Angle 0

Relief Angle 0.000

Coating Process PVD

Manufacturers Catalog Number RNMN32S-00820

Cutting Direction Neutral

Insert Hand Neutral

Material CBN

Overall Length (Decimal Inch) 0.37500

Cutting Direction Neutral

Coating Process PVD

Material CBN

Manufacturer's Grade CK2065

Insert Style RNMN

Insert Size 32

Shape Round

Corner Radius (Decimal Inch) 0.1880

Coating Process PVD

Material CBN

Manufacturer's Grade CK2065

Insert Style RNMN

Insert Size 32

Cutting Direction Neutral

Insert Hand Neutral

Insert Holding Method Clamp

Cutting Edge Style Honed

FullRadius Yes

Multi Use Application Facing; Turning

MultiUseTool Yes

Shape Round

$194.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

USA Sealing - 1' x 6" x 2" Clear Cast Acrylic Rectangular Bar

Item #: 16586851
Brand: USA Sealing
Model #: BULK-PS-CAC-628

Product Specifications
Material	Cast Acrylic
Shape	Rectangular
Height (Inch)	2
Width (Inch)	6
Length (Feet)	1
Color	Clear
Hardness	Rockwell M-95

$124.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 8mm 130° 2-Flute High Speed Steel Extra Length Drill Bit

Item #: 58581315
Brand: Guhring
Model #: 9006700080000

Features and Benefits

High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.

Product Specifications

Drill Bit Size (mm) 8.00

Drill Bit Size (Decimal Inch) 0.3150

Drill Point Angle 130

Drill Bit Material High Speed Steel

Drill Bit Finish/Coating TiN

Overall Length (mm) 240.00

Through Coolant NonCoolant Through

Shank Diameter (mm) 8.00

Flute Length (mm) 165.00

Cutting Direction Right Hand

Flute Length x Diameter Ratio 10xD

Flute Type Parabolic

Number of Flutes 2

Point Type Cone Relief

Shank Type Straight

Spiral Type Regular Spiral

Drill Bit Diameter Tolerance (mm) h8

Web Thinning Web-Thinned

Drill Bit Grade General Purpose

Series/List 670

Product Specifications
Drill Bit Size (mm)	8.00
Drill Bit Size (Decimal Inch)	0.3150
Drill Point Angle	130
Drill Bit Material	High Speed Steel
Drill Bit Finish/Coating	TiN
Overall Length (mm)	240.00
Through Coolant	NonCoolant Through
Shank Diameter (mm)	8.00
Flute Length (mm)	165.00
Cutting Direction	Right Hand
Flute Length x Diameter Ratio	10xD
Flute Type	Parabolic
Number of Flutes	2
Point Type	Cone Relief
Shank Type	Straight
Spiral Type	Regular Spiral
Drill Bit Diameter Tolerance (mm)	h8
Web Thinning	Web-Thinned
Drill Bit Grade	General Purpose
Series/List	670

$165.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Allied Machine and Engineering - Helical Flute Thread Mills Pitch (mm): 27.00 Material: Carbide

Item #: 17942772
Brand: Allied Machine and Engineering
Model #: HDTM27NPT

Features and Benefits

Titanium aluminum nitride (TiAlN) has a higher hardness than TiN and TiCN. It is extremely heat resistant and used for high speed applications on stainless steels, nickel and titanium alloys.

Product Specifications

Helical Flute Thread Mills; Pitch (mm): 27.00 ; Material: Carbide ; Thread Size (Inch): 1/8 ; Thread Type: Internal/External ; Shank Diameter (Decimal Inch): 0.3120 ; Number of Flutes: 4

Pitch (mm) 27.00

Material Carbide

Thread Size (Inch) 1/8

Thread Type Internal/External

Shank Diameter (Decimal Inch) 0.3120

Number of Flutes 4

Cutting Diameter (Decimal Inch) 0.3000

Length of Cut (Decimal Inch) 0.4820

Finish/Coating TiAlN

Through Coolant NonThrough Coolant

Overall Length (Inch) 3

Thread Standard NPT

$168.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Mitutoyo - Dial Calipers Maximum Measurement (Inch): 6 Dial Graduation (Decimal Inch): 0.001

Item #: 14345912
Brand: Mitutoyo
Model #: 505-742-52CAL

Product Specifications

Dial Calipers; Maximum Measurement (Inch): 6 ; Dial Graduation (Decimal Inch): 0.001 ; Accuracy (Decimal Inch): +/-.001 ; Jaw Length (mm): 40.00 ; Range Per Revolution (Decimal Inch): 0.100 ; Dial Face Color: Purple

Maximum Measurement (Inch) 6

Dial Graduation (Decimal Inch) 0.001

Accuracy (Decimal Inch) +/-.001

Jaw Length (mm) 40.00

Range Per Revolution (Decimal Inch) 0.100

Dial Face Color Purple

Material Stainless Steel

Minimum Measurement (Inch) 0

Calibrated Yes

Traceability Certification Included NIST

Includes Depth Measurement Rod Yes

Includes Fitted Plastic Case

Includes Inside Diameter Jaws Yes

Jaw Style Inside/Outside

Application Outside Diameter; Inside Diameter; Depth; Step

Beam Graduation (mm) 0.03

Beam Graduation (Decimal Inch) 0.0010

Jaw Material Steel

Finish/Coating Satin Chrome

$163.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎MH-10/12-50 HLDR FOR 50MM

Item #: FB5099175
Brand: duMont
Model #: 99175

Product Specifications
Protruding Length (LPR)	56 mm
Functional Length (LF)	56 mm
Body Diameter (BD)	22 mm
Tool Type	Broach Holder

$559.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎3/64″ Dia. × 9/64″ LOC × 1/4″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, TiCN, Square End Mill

Item #: KE11931000323
Brand: Keo
Model #: 931-000-323

Product Specifications
Cutting Diameter (DC)	3/64″
Shank Type	Round
Connection Diameter Machine Side (DCONMS)	1/4″
End Shape	Square
Depth of Cut Maximum (APMX)	9/64″
Length Group	Standard
Overall Length (OAL)	‎2-1/2″
Coolant Supply Property (CSP)	External
Cutting Edge Material	Carbide
Measurement Type	Inch
Coating	TiCN
Center Cutting	Yes
Flute Count (NOF)	3

$34.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sandvik Coromant - Subland Step Drill Bits Drill Body Size (mm): 6 Drill Body Size (Decimal Inch): 0.2362

Item #: 11458932
Brand: Sandvik Coromant
Model #: 7783261

Features and Benefits

Straight shanks are used for general purpose applications. The shank is smaller than the drill bit diameter. They are used with portable drills and drill presses on ferrous and non-ferrous materials.

Solid carbide provides better rigidity than High Speed Steel (HSS). It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Product Specifications

Subland Step Drill Bits; Drill Body Size (mm): 6 ; Drill Body Size (Decimal Inch): 0.2362 ; Step Diameter (mm): 4.65 ; Shank Type: Straight ; Shank Diameter (mm): 6.00 ; Drill Bit Material: Solid Carbide

Drill Body Size (mm) 6

Drill Body Size (Decimal Inch) 0.2362

Step Diameter (mm) 4.65

Shank Type Straight

Shank Diameter (mm) 6.00

Drill Bit Material Solid Carbide

Drill Bit Finish/Coating TiAlSiN/TiSiN

Fastener Type Compatibility Machine Screw

Overall Length (mm) 66

Step Length (mm) 14.00

Flute Length (mm) 23.00

Drill Point Angle 140

Series/List CoroDrill 860

Through Coolant Yes

$173.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Allied Machine and Engineering - Helical Flute Thread Mills Pitch (mm): 18.00 Material: Carbide

Item #: 18420430
Brand: Allied Machine and Engineering
Model #: TM18NPTM

Features and Benefits

Titanium aluminum nitride (TiAlN) has a higher hardness than TiN and TiCN. It is extremely heat resistant and used for high speed applications on stainless steels, nickel and titanium alloys.

Product Specifications

Helical Flute Thread Mills; Pitch (mm): 18.00 ; Material: Carbide ; Thread Size (Inch): 1/4-3/8 ; Thread Type: Internal/External ; Shank Diameter (mm): 8.0000 ; Number of Flutes: 4

Pitch (mm) 18.00

Material Carbide

Thread Size (Inch) 1/4-3/8

Thread Type Internal/External

Shank Diameter (mm) 8.0000

Number of Flutes 4

Cutting Diameter (mm) 7.75

Length of Cut (mm) 15.7000

Finish/Coating TiAlN

Through Coolant NonThrough Coolant

Overall Length (mm) 64.0000

Thread Standard NPT

$168.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

USA Sealing - 2' x 3" x 2" Clear Cast Acrylic Rectangular Bar

Item #: 16586810
Brand: USA Sealing
Model #: BULK-PS-CAC-623

Product Specifications
Material	Cast Acrylic
Shape	Rectangular
Height (Inch)	2
Width (Inch)	3
Length (Feet)	2
Color	Clear
Hardness	Rockwell M-95

$124.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Pitch (mm)	0.75
Material	Carbide
Thread Size (mm)	M10
Thread Type	Internal/External
Shank Diameter (Decimal Inch)	0.3120
Number of Flutes	4
Cutting Diameter (Decimal Inch)	0.3100
Length of Cut (Decimal Inch)	0.5910
Finish/Coating	TiAlN
Through Coolant	NonThrough Coolant
Overall Length (Inch)	3
Thread Standard	ISO

Inside Diameter (Inch)	3
Working Pressure (psi)	15.000
Vacuum Rating	22
Material	Polyolefin
Length (Feet)	25
Color	Clear/Green
Bend Radius (Decimal Inch)	3.8000
Minimum Temperature (F)	-40.000
Maximum Temperature (F)	225

Type	Power Cable
Length (Feet)	25.0
For Use With	18
PSC Code	3438

Wire Type	Solid
Wire Diameter (Decimal Inch)	1/16 in
Tensile Strength	485
Roll Weight	1000.000
Wire Material	Steel Alloy

Insert Style	RNMN
Insert Size	32
Material	CBN
Length (Inch)	0.375
Inscribed Circle (Inch)	0.375
Thickness (Inch)	0.125
Corner Radius (Decimal Inch)	0.1880
Manufacturer's Grade	CK2065
Insert Length (Decimal Inch)	0.3750
Overall Length (Decimal Inch)	0.37500
ISO Number	RNMN090300S-02020
Rake	Negative
Rake Angle	0
Relief Angle	0.000
Coating Process	PVD
Manufacturers Catalog Number	RNMN32S-00820
Cutting Direction	Neutral
Insert Hand	Neutral
Material	CBN
Overall Length (Decimal Inch)	0.37500
Cutting Direction	Neutral
Coating Process	PVD
Material	CBN
Manufacturer's Grade	CK2065
Insert Style	RNMN
Insert Size	32
Shape	Round
Corner Radius (Decimal Inch)	0.1880
Coating Process	PVD
Material	CBN
Manufacturer's Grade	CK2065
Insert Style	RNMN
Insert Size	32
Cutting Direction	Neutral
Insert Hand	Neutral
Insert Holding Method	Clamp
Cutting Edge Style	Honed
FullRadius	Yes
Multi Use Application	Facing; Turning
MultiUseTool	Yes
Shape	Round

Pitch (mm)	27.00
Material	Carbide
Thread Size (Inch)	1/8
Thread Type	Internal/External
Shank Diameter (Decimal Inch)	0.3120
Number of Flutes	4
Cutting Diameter (Decimal Inch)	0.3000
Length of Cut (Decimal Inch)	0.4820
Finish/Coating	TiAlN
Through Coolant	NonThrough Coolant
Overall Length (Inch)	3
Thread Standard	NPT

Maximum Measurement (Inch)	6
Dial Graduation (Decimal Inch)	0.001
Accuracy (Decimal Inch)	+/-.001
Jaw Length (mm)	40.00
Range Per Revolution (Decimal Inch)	0.100
Dial Face Color	Purple
Material	Stainless Steel
Minimum Measurement (Inch)	0
Calibrated	Yes
Traceability Certification Included	NIST
Includes Depth Measurement Rod	Yes
Includes	Fitted Plastic Case
Includes Inside Diameter Jaws	Yes
Jaw Style	Inside/Outside
Application	Outside Diameter; Inside Diameter; Depth; Step
Beam Graduation (mm)	0.03
Beam Graduation (Decimal Inch)	0.0010
Jaw Material	Steel
Finish/Coating	Satin Chrome

Drill Body Size (mm)	6
Drill Body Size (Decimal Inch)	0.2362
Step Diameter (mm)	4.65
Shank Type	Straight
Shank Diameter (mm)	6.00
Drill Bit Material	Solid Carbide
Drill Bit Finish/Coating	TiAlSiN/TiSiN
Fastener Type Compatibility	Machine Screw
Overall Length (mm)	66
Step Length (mm)	14.00
Flute Length (mm)	23.00
Drill Point Angle	140
Series/List	CoroDrill 860
Through Coolant	Yes

Pitch (mm)	18.00
Material	Carbide
Thread Size (Inch)	1/4-3/8
Thread Type	Internal/External
Shank Diameter (mm)	8.0000
Number of Flutes	4
Cutting Diameter (mm)	7.75
Length of Cut (mm)	15.7000
Finish/Coating	TiAlN
Through Coolant	NonThrough Coolant
Overall Length (mm)	64.0000
Thread Standard	NPT